Junlan Electronic CAW70040 42 inch TV Sound Bar with Amazon Alexa Voice Control User Manual 1

Shenzhen Junlan Electronic Ltd 42 inch TV Sound Bar with Amazon Alexa Voice Control 1

User Manual

2FCC NOTICE:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.FCC ID: OKUCAW70040
PROdUCT OvERvIEW3TOP VIEWFRONT VIEW REAR VIEW8. Remote IR Sensor 13. AUX IN 1 Jack15. DC IN Jack9. Built-in Microphone10. DisplaySTANDBYMODE VOL-WPS VOL+1 2 3 4 5 61.STANDBY/MODE Button2.     /WPS Button3.      /VOL- Button4.      /VOL+ Button5.     (Microphone On/Off) Button6.     (Communication) Button78910 97. Communication Status LED IndicatorFM AN TOPI CAL INAUX I N 1AUX I N 2LRDC      16 V, 3A11 12 13 14 1514. AUX IN 2 Jack11. FM Antenna12. OPTICAL IN Port16 16 16 16FRONT VIEW16. Speaker
REMOTE CONTROL(Mute)Button(Previous)/ TUNE- Button2.9.6.10.8.(Play/pause) ButtonVOL - (Volume down) Button3.1.4.       (Microphone On/Off) Button(Next)/TUNE+ ButtonVOL + (Volume up) Button TUNE- TUNE+WPSMODENHS-50021234567891011Power Button5.       (Communication) Button7. MODE Button11. WPS Button4
FIRST TIME USE●Remove and discard the insulation as figure on the right.●Replacing Batteries For Remote Control1. Push and slide out the battery holder as figure 1 below.2. Replace the battery with a new CR2025 button cell as the polaritymarkings on the rear of the Remote Control.3. Close the battery holder.BATTERY PRECAUTIONSFollow these precautions when using a battery in this device:1. Use only the size and type of battery specified.2. Be sure to follow the correct polarity when installing the battery as indicated in the batterycompartment, a reserved battery may cause damage to the device.3. Do not mix different types of batteries together ( e.g: Alkaline and Carbon -zinc )or old batteries with fresh ones.4. If the batteries in the device are consumed or the device is not to be used for a long period of time,remove the batteries to prevent damage or injury from possible leakage.5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.( Follow battery manufacturer’s instructions.)6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.7. Clean the battery contacts and also those of the device prior to battery installation.8. The remote control supplied with a coin/buttoncell battery. If the coin button cell battery isswallowed, it can cause severe internal burns injust 2 hours and can lead to death. Keep newand used battery away from children. If theBattery compartment does not close securely,stop using the product and keep it away fromchildren. If you think batteries might have beenswallowed or placed any part of the body, seekimmediate medical attention.CR2025Fig.1 Fig.2 Fig.3BATTERY  INSTALLATION  OF  REMOTE CONTROLRemote control operation range●When there is an obstacle between the remote and the transmitter, the unit may not operate.●When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong lightshines on the REMOTE SENSOR of the unit, the operation of the remote may be unstable.CAUTION●Danger of explosion if the battery is incorrectly replaced.●Replace only with the same or equivalent type.film5
PLACEMENT AND MOUNTING1. Placing the device on table - VentilationWhen placing the Sound Bar on an entertainment center, bookshelf, or any type ofenclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar forventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heatgenerated from the Sound Bar could produce a potential heat hazard.2.  The  Installation  DistanceFM ANTOPICAL I NAUX IN 1AUX IN 2LRDC      16V,3A29.1 INCHES6
Mounting to a wall2.1 Mountingto a wooden wallA. Mark the position of the mounting screws on the wall using a pencil.C. Put the sound bar onto the mounting screws. Make sure they are firm and stable.2.2 Mountingto a brick wall29.1 inchesB. Drill the screws directly into the marks that you have made on the wall and leave approx. 0.3 inches length to hook the sound bar.(screws not included)(screws and plastic fixing plug are not included)A. Mark the position of the mounting screws on the wall using a pencil.E. Put the sound bar onto the mounting screws. Make sure they are firm and stable.C. Insert the fixing plug and hammer into the holes.D. Secure the screws into the fixing plug and leave approx. 0.3 inches length to hookthe sound bar.B. Drill 2 holes on wall with a powerful electric drill. 29.1 inches7
GENERAL OPERATIONBT.............................................................................................Bluetooth Mode WIFI..................................................................................................WIFI Mode2.  Press and hold the STANDBY/MODE button on the unit or press the      Button3. During Playback:on remote control to turn on the unit. Press the STANDBY/MODE button on theunit or press the  MODE button on remote control repeatedly to turn to desired mode as below:4.  When finishing listening, press and hold the STANDBY/MODE button on the unit or press the       button on remote control to put the unit into standby mode. 1.  Connect the AC/DC adapter to the unit and wall outlet. "WAIT" will sppear on display. AUX 1........................................................................................AUX IN 1 Mode RADIO......................................................................................FM Radio ModeAUX 2........................................................................................AUX IN 2 Mode OPT......................................................................................OPTICAL IN Mode Press and hold the VOL- or VOL+ button on the unit or press the VOL- or VOL+  button on remote control to adjust the volume.Press the        button on remote control to turn off sound, press again to resume.8
The App icon will appear as the figure on right after successful installation.APP dOWNLOAd ANd INSTALLATIONMUzO Player Download the MUZO Player from Apple App store for iOS devies. Download MUZO Player from Google Play store for Android devices.CONNECTION desired WiFi network (router).1. Plug one end of the adapter to DC IN jack of the speaker, then plug the adapter into the Connect your iOS or Android device to the  wall outlet, press and hold the STANDBY/MODE button on the unit to turn on the unit. Wait until "WIFI" blinks on display, now the speaker is ready for connection. 2. Turn on the WiFi on your iOS or Android device(smart phone or tablet with WiFi function), 9WIFI SETUPTo AC Wall OutletTo DC IN JackWIFI
to continue.WIFI INFO1Please enter Wi-Fi password:NextWi-Fi:  XXXX<NextPassword: Please enter Wi-Fi passwordPress the4. Inputing the WiFi password to make the speaker to connect to WiFi network(router), Press the    Next<Press the WPS key on deviceWPSPRESS TO ENTER SETUP M...to put the device into networksetup mode.Then click the "Next" button toNext25.   on top of the speaker. Press and hold the WPS buttonbutton on your MUZO Player to continue.  10
during the connecting process.6. There will be voice instructing like " searching for WiFi connection",  " waiting for WiFi connection" PLEASE WAIT3Wait for device to be<Cancelconnected to Wi-Fi...Don't operate device during Wi-Fi setup.Please wait for compltion of setuppatiently. It's usually finished in 60seconds.If you hear voice prompt for erro message.please go back and retryCONNECTEDDevice is connected to XXXXsuccessfullyCurrent Wi-Fi strength of device:100%Next7. When the speaker is  connected to the Wi-Fi (router)  successfully, and the voice sounds "Wi-Fi connected",  the Indicator on front of the speaker will keep 11If connection fails, please try again and repeat the above connecting steps. communication status indicatorWHITE FRONT VIEW OF THE UNITand "WIFI" will stay on display.
DDSearchFavoritesMy musicTuneIniHeartRadioLine InSettingsTouch to search Touch to listen the  collected favorite songsTouch to listen native songsTouch to listen radio, talks, sports, etc.Touch to log on Touch to switch to linein modeprofessional music platformTouch to log on professional online radio platformonline songsTouch to check version and feedbackTIDALSportifyTouch to listen from online songs platformBluetoothTouch to switch to Bluetooth modeHOME PAGE INTERFACEClick the " MUZO " on screen to enter homepage, operate as below instructions and the screen instructions. Some platforms may need registration.Touch to log in Amazon Touch to add more service Amazon12
1. Tap "Spotify" on MUZO homepage.2. Input your account and password to log in.3. Open the Spotify on your phone, tablet or PC, and play any song.4. Tap the connect icon         .5. Pick your device from the list.Before use, you have to create an spotify premium account for log in.Before use, you have to create an iHeartradio account for log in.Before use, you have to create a TIDAL account for log in.1. Tap "iHeartradio" on MUZO homepage.2. Input your account and password to log in.3. Select the desired song and play.1. Tap "TIDAL" on MUZO homepage.2. Input your account and password to log in.3. Select the desired song and play.13LicensesThe Spotify Software is subject to third party licenses found here:www.spotify.com/connect/third-party-licenses.SPOTIFY  OPERATIONIHEARTRADIO  OPERATIONTIDAL  OPERATION
1. Touch                               on homepage, the log in window will pop up, input your account AMAZON  LINK PLAY  ALEXA  VOICE  CONTROLBefore using Amazon linkplay Alexa voice control function, you must get an Amazon prime account, creat an account on Amazon website.Amazonand password to log in.2. If you have logged in before, the figures below will appear and operate as the tips.3. Press the         button once to activate the speaker to communicate before asking the     Example 1:Press the       button first,  then ask the speaker, what's the weather like today?The speaker will reply: the weather is not so cold.The speaker will reply: it is 8 o'clock now.Continute to ask the speaker to do other things, such as  "Play Music!".The speaker will reply: here is the station we found, the music will be played.Amazon login successfulNext14speaker, (or you must say "ALEXA" to activate the speaker's communication systemwithout pressing any button).Example 2:Just say "ALEXA", then you can ask the speaker,  what's the time now?4. If you want to stop asking or inquiring the speaker, or avoiding external voice interference, press and hold the      button to turn off voice input, the communication indicator will turn  , press and hold this button again to turn on.REd
IdleListening Blue LED ONThinking Blue LED ONTalking Blue LED blinksSPEAKER STATUSCOMMUNICATION  INDICATOR  STATUSLED STATUSLED ONWhiteRed LED ONMicrophone Off15communication status indicatorFRONT VIEW OF THE UNIT
BLUETOOTH OPERATIONPairing the speaker with Bluetooth devices (phone or music device)5. Once paired successfully, "BT" will stay on display and a tone will be heard. 6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions of your device. 4. Once you have activated Bluetooth on your device, select the speaker name from the pairing list of available Bluetooth devices. 7. Once you have paired the speaker with a device, the speaker will remember this device  and will pair automatically when the device’s Bluetooth is activated and in range.During playing:Press the        button on the unit to pause, press again to resume playing.Press and hold the VOL- or VOL+ button on the unit to adjust the volume.101. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wallNOTE:  The pairing name is  " ".NAXA NHS-5002 outlet, press and hold the STANDBY/MODE button to powr on the unit, wait until "WIFI" appears on display.2. Press the MODE button repeatedly until the "BT" blinks on display. Now it is in pairing mode. Press the       or        on the unit to skip to next or previous track.16
RAdIO OPERATIONBefor using your unit for FM reception, unwrap and fully extend the antenna wire.You may need to adjust the position of the antenna wire for maximum signal strength.4. Press the        or        to listen the stored station.3. Press  the        /WPS button on the unit to search up and down the band. The radio will  search the station available and store automatically.1. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the walloutlet, press and hold the STANDBY/MODE button to powr on the unit, wait until "WIFI" appears on display.2. Press the MODE button repeatedly until the "RADIO" blinks on display.  17
    ~  Insert the other end to the AUX IN jack on the rear of the main unit.1.  Connect the external audio device to the unit by an      ~  Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device. audio connection cable with 3.5mm stereo mini jacks as:Mobile Phone(Audio Connection Cable supplied)  Connect to the Phones; AUX Out;Line Out Jack of the external devices (Such like MP3 Player; cell phones;  iPod/iPad ... etc)4. Play music as usual on your external device.MP3AUX IN 1 OPERATION2. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the walloutlet, press and hold the STANDBY/MODE button to powr on the unit, wait until "WIFI" appears on display.3. Press the MODE button repeatedly until the "AUX 1" blinks on display.  AUX IN 118
AUX IN 2 OPERATION1. Plug one end of RCA White and Red cable into the LINE IN jacks on the rear  of the unit.Audio out jacks of TV/DVD/VCR/DVR etcLRV Plug the other end of RCA White and Red cable into audio out jacks of TV or external device as the illustration shown as below.AUX IN 2LR4. Play music as usual on your external device.2. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the walloutlet, press and hold the STANDBY/MODE button to powr on the unit, wait until "WIFI" appears on display.3. Press the MODE button repeatedly until the "AUX 2" blinks on display.  19An external Video/audio player(such as TV, DVD Player, VCR etc.) can be connected to this unit and heard through the speakers.white plug red plug
OPTICAL IN OPERATIONTV; DVD player; BD player... etc.4. Power on the connected external player and start playback the Music as usual.1. Connect the Optical out jack from the external audio Player (such like TV, DVD Player     BD Player …etc.) to the  OPTICAL IN jack on the top of unit by the Optical Connection Optical Connection Cable ( not supplied )Cable (not supplied) as the figure below: ( F or PCM format only )Turn on the digital audio output and set it to PCM (Plus Code Modulation) type similar to the follows figure:BassTrebleBalanceSelect Move MENU ExitSound Mode StandardSurround OffAVL OffAudio Language EnglishPicture Time Setup Lock OffAudioAudioDigital Output PCMDigital Output PCMOPICAL IN2. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the walloutlet, press and hold the STANDBY/MODE button to powr on the unit, wait until "WIFI" appears on display.3. Press the MODE button repeatedly until the "OPT" blinks on display.  20
TROUBLESHOOTINGCheck the following before requesting service:SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONVolume level of paired/connected deviceis in low levelRise the volume level of thepaired/connected deviceVolume level of the connected/paireddevice too highReduce the volume level of theconnected/paired deviceBT notunctioningThe external BT device had NOT paired tothe unitPair the external BT device to theunitThe external BT device too far from theunitPlace the external BT deviceclose to the unitSPECIFICATTIONSBT Version: 4.1BT Operation Distance: 32 Feet in open areaPACKAGE INCLUDESSPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGEWITHOUT NOTICEfNo sound orsound weakSound distortionWifi Operation Distance: Feet in open area96aboutabout1 X User's Manual1 X AC/DC Adapter1 X Audio Cable with 3.5mm Plug1 X RCA Audio Cable21Power Source: DC16V          3A
   LIMITED WARRANTY NAXA LIMITED WARRANTY (“Warranty”) — For Product Categories Listed in Chart Below (as applicable, “Product”).  Before  returning  your Product  for  service under  this  Warranty,  please  read the instruction  manual carefully  and visit  our  website at www.naxa.com   for   product   updates   and   extended   support   documentation   (e.g.,   Frequently   Asked   Questions,   Common Troubleshooting Guides, etc …). If you are still having trouble with your Product, please contact Naxa Customer Support.  Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.  Subject to the terms and conditions herein, Naxa Electronics, Inc. (herein after called “Naxa”) warrants to the original purchaser of the Product  (“Customer”)  that  the  Product  will  be  free  from  defects  in  material  or  workmanship  under  normal,  non-commercial  use (“Defects”) for the applicable Warranty Period listed below.  Warranty  Period encompasses  separate  “Coverage  Periods”  for Parts  and  Labor  as  listed  in  the  table  below.  Each  Coverage  Period begins  from the original date of  Customer purchase.  If Customer returns  a defective  Product (or any component  thereof)  during the applicable Coverage Period, Naxa  will, at its option: (1) repair the Product (or any component  thereof) or; (2) replace  the Product (or any component  thereof) with a new or refurbished Product (or any component thereof), in either case free of charge to Customer for Parts and/or Labor during the specified Coverage Period only, and excluding the applicable shipping charges noted below for which the Customer  is  responsible.  The  foregoing states  the  Customer’s  exclusive  remedy  and  Naxa’s  sole  liability  for  breach  of  the limited warranty contained herein.  This  warranty  specifically  excludes  any  product  that  has  been  subject  to  or  has  defects  resulting  from:(a)any  neglect or  misuse  by a Customer;  (b)  an  accident, improper  application,  violation of  operating instructions  for the  Product,  or  any  other  Customer-induced damage;  (c)  the  alteration or removal  of  any  Product  serial  number;  (d)  any  modification  or  repair  to  Product  (or  any component thereof)  by any  party  other  than  Naxa  or  a  party  authorized  in  writing by  Naxa;  (e)  any  damage  to  Product  due  to  power  surges, incorrect  electrical  voltage,  misconnection  to  any device, or malfunction  of  any  device  used  with  the  Product (or,  as  applicable,  any component thereof); (f)  cosmetic damage to the Product  caused by normal  wear and tear; (g) shipping damage that occurs while the Product is in transit; (h) damage  caused by heat sources,  sunlight, electromagnetic conditions, or other climatic conditions; or (i) any acts of God. Refurbished products are not covered by this Warranty.  Product is sold to Customer for personal, non-commercial  use only. Product is not warranted  for commercial or rental use. In addition, Product is not warranted against  failure, and  should not be used by Customer for any application  where there is  a risk  that any data stored on Product will be breached  or otherwise compromised,  or the data  stored  on Product is relied  upon for medical or lifesaving applications. Naxa disclaims any Warranty for any of the foregoing uses to the fullest extent permitted  by law. Customer assumes any and all risks associated with such uses of Product, and agrees to indemnify Naxa for any damages claimed for such uses.  EXCEPT  FOR  THE  EXPRESS  WARRANTIES  STATED  ABOVE  AND TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  LAW,  ALL  PRODUCTS  ARE PROVIDED “AS IS”, AND NAXA DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION  ANY IMPLIED WARRANTY  OF (I) MERCHANTABILITY;   (II)  FITNESS   FOR  A  PARTICULAR  PURPOSE,  OR;  (III)  NON-INFRINGEMENT  OF  THIRD  PARTY  RIGHTS.  TO  THE MAXIMUM EXTENT  PERMITTED  BY  APPLICABLE  LAW, IN NO  EVENT  WILL  NAXA BE  LIABLE  TO  CUSTOMER  OR ANY  THIRD PARTY  FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING,  WITHOUT  LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY  OF ANY DATA, OR COST OF SUBSTITUTE  GOODS, REGARDLESS OF THE THEORY OF LIABILITY  (INCLUDING   NEGLIGENCE)   AND  EVEN  IF  NAXA  HAS  BEEN  ADVISED  OF  THE  POSSBILITY  OF  SUCH  DAMAGES,  NAXA’S AGGREGATE  LIABILITY  TO  CUSTOMER  FOR  ACTUAL  DIRECT  DAMAGES  FOR  ANY  CAUSE  WHATSOEVER  SHALL  BE  LIMITED  TO  THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCTS CAUSING THE DAMAGES, IF ANY.  This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction.  All warranty returns must have an RMA number provided by Naxa Customer Support. An RMA number can be obtained by contacting Naxa Customer Support by phone, email, or online by using the RMA ticketing system at www.naxa.com. Naxa Electronics, Inc. RMA Processing / Customer Support 2320 E. 49th St., Vernon, CA 90058  Email: support@naxa.com Phone: (866) 411-6292 Web: www.naxa.com  Hours of Operation: Monday – Friday 10:00 AM to 5:00 PM PST

Navigation menu