Junlan Electronic CAW73014 Wi-Fi&Bluetooth; Speaker with Amazon Alexa Voice Control User Manual 1

Shenzhen Junlan Electronic Ltd Wi-Fi&Bluetooth; Speaker with Amazon Alexa Voice Control 1

Users manual

2FCC WARNING:To assure continued operation, follow the attached installation instructions anduse only shield cables when connecting to other devices. Changes ormodifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.
PROdUCT OvERvIEW3ON/OFF AUX INTOP VIEWFRONT VIEW REAR VIEW13 4 679 10 112. MODE Button3. WPS /(Play/Pause) Button4. Microphone (On/Off) Button5. Communication Button8. Communication Status Indicator9. Power ON/OFF Switch10. AUX IN Jack11. DC IN JackMODE WPS128DC 9V1. Built-in Microphone56. Volume Knob7. Mode Indicator
The App icon will appear as the figure on right after successful installation.APP dOWNLOAd ANd INSTALLATIONMUzO Player Download the MUZO Player from Apple App store for iOS devies. Download MUZO Player from Google Play store for Android devices.CONNECTION desired WiFi network (router).1. Plug one end of the adapter to DC IN jack of the speaker, then plug the adapter into the Connect your iOS or Android device to the  wall outlet, slide the power switch to ON position to turn on the speakers. The mode  indicator on front of the speaker will blink blue and green alternatively, wait until it turns  and blinks, now the speaker is ready for connection. 2. Turn on the WiFi on your iOS or Android device(smart phone or tablet with WiFi function), AC Wall OutletGREEN SETUP4
to continue.WIFI INFO1Please enter Wi-Fi password:NextWi-Fi:  XXXX<NextPassword: Please enter Wi-Fi passwordPress the4. Inputing the WiFi password to make the speaker to connect to WiFi network(router), Press the    Next<Press the WPS key on deviceWPSPRESS TO ENTER SETUP M...to put the device into networksetup mode.Then click the "Next" button toNext25.   on top of the speaker. Press and hold the WPS buttonbutton on your MUZO Player to continue.  5
during the connecting process.6. There will be voice instructing like " searching for WiFi connection",  " waiting for WiFi connection" PLEASE WAIT3Wait for device to be<Cancelconnected to Wi-Fi...Don't operate device during Wi-Fi setup.Please wait for compltion of setuppatiently. It's usually finished in 60seconds.If you hear voice prompt for erro message.please go back and retryCONNECTEDDevice is connected to XXXXsuccessfullyCurrent Wi-Fi strength of device:100%Next7. When the speaker is  connected to the Wi-Fi (router)  successfully, and the voice sounds "Wi-Fi connected",  the mode Indicator on front of the speaker will stay lit,6If connection fails, please try again and repeat the above connecting steps. mode indicatorcommunication status indicatorat the same time, the communication status indicator will keep  .WHITE
DDSearchFavoritesMy musicTuneIniHeartRadioLine InSettingsTouch to search Touch to listen the  collected favorite songsTouch to listen native songsTouch to listen radio, talks, sports, etc.Touch to log on Touch to switch to linein modeprofessional music platformTouch to log on professional online radio platformonline songsTouch to check version and feedbackTIDALSportifyTouch to listen from online songs platformBluetoothTouch to switch to Bluetooth modeHOME PAGE INTERFACEClick the " MUZO " on screen to enter homepage, operate as below instructions and the screen instructions. Some platforms may need registration.Touch to log in Amazon Touch to add more service Amazon7
1. Tap "Spotify" on MUZO homepage.2. Input your account and password to log in.3. Open the Spotify on your phone, tablet or PC, and play any song.4. Tap the connect icon         .5. Pick your device from the list.Before use, you have to create an spotify premium account for log in.Before use, you have to create an iHeartradio account for log in.Before use, you have to create a TIDAL account for log in.1. Tap "iHeartradio" on MUZO homepage.2. Input your account and password to log in.3. Select the desired song and play.1. Tap "TIDAL" on MUZO homepage.2. Input your account and password to log in.3. Select the desired song and play.8LicensesThe Spotify Software is subject to third party licenses found here:www.spotify.com/connect/third-party-licenses.SPOTIFY  OPERATIONIHEARTRADIO  OPERATIONTIDAL  OPERATION
1. Touch                               on homepage, the log in window will pop up, input your account AMAZON  LINK PLAY  ALEXA  VOICE  CONTROLBefore using Amazon linkplay Alexa voice control function, you must get an Amazon prime account, creat an account on Amazon website.Amazonand password to log in.2. If you have logged in before, the figures below will appear and operate as the tips.3. Press the         button once to activate the speaker to communicate before asking the     Example 1:Press the       button first,  then ask the speaker, what's the weather like today?The speaker will reply: the weather is not so cold.The speaker will reply: it is 8 o'clock now.Continute to ask the speaker to do other things, such as  "Play Music!".The speaker will reply: here is the station we found, the music will be played.Amazon login successfulNext9speaker, (or you must say "ALEXA" to activate the speaker's communication systemwithout pressing any button).Example 2:Just say "ALEXA", then you can ask the speaker,  what's the time now?4. If you want to stop asking or inquiring the speaker, or avoiding external voice interference, press and hold the      button to turn off voice input, the communication indicator will turn  , press and hold this button again to turn on.REd
IdleListening Blue LED ONThinking Blue LED ONTalking Blue LED blinksSPEAKER STATUScommunication status indicatorCOMMUNICATION  INDICATOR  STATUSLED STATUSLED ONWhiteRed LED ONMicrophone Off10
11BLUETOOTH OPERATIONPairing the speaker with Bluetooth devices (phone or music device)5. Once paired successfully, Bluetooth indicator will stop blinking and a tone will be heard. 6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.and blink, now it is in pairing mode.3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer to the manufacturer’s instructions of your device. 4. Once you have activated Bluetooth on your device, select the speaker name from the pairing list of available Bluetooth devices. 7. Once you have paired the speaker with a device, the speaker will remember this device  and will pair automatically when the device’s Bluetooth is activated and in range.During playing:Press the  WPS button to pause, press again to resume playing.Turn the volume knob to adjust the volume.101. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wall outlet, slide the power switch to ON position to turn on the unit. The mode indicator will NOTE: Only one device can be paired and connected with one unit. NOTE:  blink blue and green alternatively, wait until the mode indicator turns and blinks.GREEN 2. Press the MODE button repeatedly to turn to Bluetooth mode, the indicator will turn BLUE The pairing name is " ".NAXA NAS-5001
This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur ina particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed andoperated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To  maintain compliance  with  FCC’s  RF  Exposure  guidelines,  This  equipment  should  be  installed  andoperated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
13TROUBLESHOOTINGCheck the following before requesting service:SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTIONCan’tpower onBuilt inbatterydrainedRecharge the batteryVolume level of paired/connected deviceis in low levelRise the volume level of thepaired/connected deviceVolume level of the connected/paireddevice too highReduce the volume level of theconnected/paired deviceBT notunctioningThe external BT device had NOT paired totheunitPair the external BT device to theunitThe external BT device too far from theunitPlace the external BT deviceclose to the unitSPECIFICATTIONSBT Version: 4.1BT Operation Distance: 32 Feet in open areaPACKAGE INCLUDES1 x Us ’s Manual1 x Adapter1 x Audio Connection Cables with 3.5mm PlugSPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGEWITHOUT NOTICEerfNo sound orsound weakSound distortionWifi Operation Distance: Feet in open area96aboutabout
   LIMITED WARRANTY NAXA LIMITED WARRANTY (“Warranty”) — For Product Categories Listed in Chart Below (as applicable, “Product”).  Before  returning  your Product  for service under  this Warranty,  please  read the  instruction  manual  carefully  and visit  our  website  at www.naxa.com   for   product   updates   and   extended   support   documentation   (e.g.,   Frequently    Asked   Questions,   Common Troubleshooting Guides, etc …). If you are still having trouble with your Product, please contact Naxa Customer Support.  Warning: Some Products may contain components that are small enough to be swallowed. Please keep out of reach of children.  Subject to the terms and conditions herein, Naxa Electronics, Inc. (herein after called “Naxa”) warrants to the original purchaser of the Product  (“Customer”)  that  the  Product  will  be  free  from  defects  in  material  or  workmanship  under  normal,  non-commercial  use (“Defects”) for the applicable Warranty Period listed below.  Warranty  Period encompasses  separate  “Coverage  Periods”  for  Parts  and  Labor  as  listed  in  the  table  below.  Each  Coverage  Period begins  from the original  date of  Customer purchase.  If  Customer returns  a defective  Product (or  any component  thereof)  during  the applicable Coverage Period, Naxa will, at its option: (1)  repair the Product (or any component thereof) or; (2) replace the Product (or any component  thereof)  with a new or refurbished Product (or any component thereof), in either case free of charge to Customer for Parts and/or Labor during the specified Coverage Period only, and excluding the applicable shipping charges noted below for which the Customer  is  responsible.  The  foregoing states  the  Customer’s  exclusive  remedy  and  Naxa’s  sole  liability  for  breach  of  the limited warranty contained herein.  This  warranty  specifically excludes  any product that  has  been  subject  to or  has  defects  resulting  from:(a)any  neglect or  misuse  by a Customer;  (b) an  accident,  improper  application,  violation of  operating  instructions  for  the Product,  or  any other  Customer-induced damage;  (c)  the  alteration or  removal  of  any  Product  serial  number;  (d)  any  modification  or  repair  to  Product  (or  any component thereof)  by any  party  other  than  Naxa  or  a  party  authorized  in  writing by  Naxa;  (e)  any damage  to  Product  due to  power  surges, incorrect  electrical  voltage,  misconnection  to  any device, or malfunction  of  any  device  used with  the Product  (or, as  applicable,  any component thereof);  (f) cosmetic damage to the Product caused by normal  wear and tear; (g) shipping damage that occurs while the Product is in transit; (h) damage caused by heat sources,  sunlight, electromagnetic conditions,  or other climatic  conditions;  or (i)  any acts of God. Refurbished products are not covered by this Warranty.  Product is sold to Customer for personal, non-commercial use only. Product is not warranted for commercial  or rental use. In addition, Product is not warranted against failure, and  should not be used by Customer  for  any application  where  there  is a  risk that  any data stored on Product  will be breached  or otherwise  compromised,  or the data stored  on Product is relied upon for  medical or lifesaving applications. Naxa disclaims any Warranty for any of the foregoing uses to the fullest extent permitted  by law. Customer  assumes any and all risks associated with such uses of Product, and agrees to indemnify Naxa for any damages claimed for such uses.  EXCEPT  FOR  THE  EXPRESS  WARRANTIES  STATED  ABOVE  AND  TO  THE  MAXIMUM  EXTENT  PERMITTED  BY  LAW,  ALL  PRODUCTS  ARE PROVIDED “AS IS”, AND NAXA DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION  ANY IMPLIED WARRANTY OF (I) MERCHANTABILITY;   (II)  FITNESS  FOR  A  PARTICULAR  PURPOSE,  OR;  (III)  NON-INFRINGEMENT  OF  THIRD  PARTY  RIGHTS.  TO  THE MAXIMUM EXTENT  PERMITTED  BY  APPLICABLE  LAW,  IN  NO EVENT  WILL  NAXA BE  LIABLE  TO CUSTOMER  OR  ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,  EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY  OF ANY DATA, OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY OF LIABILITY  (INCLUDING  NEGLIGENCE)   AND  EVEN  IF  NAXA  HAS  BEEN  ADVISED  OF  THE  POSSBILITY  OF  SUCH  DAMAGES,  NAXA’S AGGREGATE  LIABILITY  TO  CUSTOMER  FOR  ACTUAL  DIRECT  DAMAGES  FOR  ANY  CAUSE  WHATSOEVER  SHALL  BE  LIMITED  TO  THE CUMULATIVE PRODUCT FEES PAID BY THAT CUSTOMER FOR THE PRODUCTS CAUSING THE DAMAGES, IF ANY.  This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction.  All warranty returns must have an RMA number provided by Naxa Customer Support. An RMA number can be obtained by contacting Naxa Customer Support by phone, email, or online by using the RMA ticketing system at www.naxa.com. Naxa Electronics, Inc. RMA Processing / Customer Support 2320 E. 49th St., Vernon, CA 90058  Email: support@naxa.com Phone: (866) 411-6292 Web: www.naxa.com  Hours of Operation: Monday – Friday 10:00 AM to 5:00 PM PST

Navigation menu