Junlan Electronic CSH308 2 Pack whole house wifi speaker system User Manual
Shenzhen Junlan Electronic Ltd 2 Pack whole house wifi speaker system
User Manual
3$&. :+2/( +286( :,), 63($.(5 6<67(0 Owner's Manual PLEASE READ BEFORE OPERATING THIS EQUIPMENT. 02'(/&6+ Size: 148.5(W) x 210(H)mm (A5) IMPORTANT SAFETY INSTRUCTIONS FCC NOTICE: To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void userâs authority to operate this device. FCC Warnings WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID:OKU-CSH308 IMPORTANT SAFETY INSTRUCTIONS LOCATION OF CONTROLS WPS VOL- VOL+ POWER DC DC IN 5V 2 A AUX IN OFF ON 1.WPS Button 2. (Play/Pause) Button 3. VOL-(Volume Down) Button 4. VOL+ (Volume Up) Button 5. Indicator 6. POWER ON/OFF Switch 7. DC IN Jack 8. AUX IN Jack Specification Power Source......................................................................................5V 2A Speakers..................................................................................................................2 X 3 W Accessories: 2 X USB Cable 2 X AC/USB Adapter 2 X 3.5mm Stereo AUX IN Cable 1 X Instruction Manual Setup PREPARATION Before connecting the mobile phone with the unit CSH308, please search "MUZO" player from network and download it, or download the MUZO APP from APP store. Install the APP and set the language of mobile phone to English. The APP icon will appear like the Fig.1 after successful installation. NOTE:Please make sure that there is no AUX IN cable plugged in AUX IN jack. MUZO PLAYER Fig. 1 CONNECT THE MOBILE PHONE WITH THE UNIT Slide the POWER ON/OFF switch to "ON" position to power on the unit CSH308. Turn on the WiFi on the mobile phone, then search the router (WiFi Source), for example, the router name is "JUNLAN", select "JUNLAN" from WiFi name list, input the password (eg:12345678)to make successful connection. Click MUZO icon to open the MUZO player APP, it will start to search muzo system automatically. Follow the instruction to input the WiFi password (12345678) to log on same WiFi network. Follow the instruction below to establish connection. 1. Press WPS button on the unit CSH308BUN. 2.There will be voice tone instructing like: " Searching for Wifi connection " " Waiting for Wifi connection " " Wifi connected " successfully connected device connected to JUNLAN network current signal strength 59% Setup Add the device which is already connected to the router A. Connect phone to the same router as the devices. B. Open the app, it will search all the devices. Add the device which is not connected to the router If you want to add other device which is not connected to the router, you can follow the operations below: 1. Click â + â on DEVICE LIST interface, you can add the device according to the steps; 2. After finished, the new added device will appear in the DEVICE LIST Setup Rename the device After you first add the device, it will automatically instruct you to rename the device, while if you want change the name of the device, you can follow the instruction below: Click the , and rename the device: Eg. Rename the device as "Garden" Setting the password for the speakers After naming the speakers, it will prompt you to set the password for speakers. Set at least 8-digit password. After setting password, other device will need password to connect the unit directly under the condiction that it hadn't connected with WiFi source. Guide of Using App Functions 1. Search It can search the internet resource for you according to your requirement, for example, input Lady Gaga and all her songs on Internet will be found. As the pictures below: For example, input Lady Gaga and all her songs,albums on Internet will be found. Guide of Using App Functions 2. Favorites 2.1 Collect Songs in Favorites The Favorite function allows you to freely collect your favorite songs, you need not to look for the song among the internet resource again 1. Click the heart icon in Playing interface to collect this song in Favorites 2.2 Manage the songs in Favorites You can manage the songs in Favorites, remove or add it in your customized song list. Click the icon on the right of the song: Guide of Using App Functions 3. My Music 3.1 Play local music It can automatically search the song in local device, Eg, your iPhone: 3.2 Home Music Share If your PC is connecting the same router with the device, then the device can automatically search the songs in your computer, you can playback the song in computer to the speakers. Guide of Using App Functions 3.3 My Playlists You can add or delete the playlist. 3.4 Recently 1. It can collect the songs you recently listened; 2. It can manage the playlists and preset it to the speakers. 10 Guide of Using App Functions 3.4 Recently----Manage the playlists You can choose the song add it to a playlist or just remove it. 3.4 Recently----Music preset You can set the Recently to Preset Music. Eg Set channel 6 as Recently: 11 Guide of Using App Functions 4. TTpod TTpod itself is a powerful, free cell phone music player software, with hundreds of millions of users. Click TTpod on the main function control interface, you can enjoy all the high quality internet music provided by it. 5. TuneIn Online radio Tunein is powerful, it can provide a collection of tens of millions of online radio around the world, click Tunein on the main function control interface: choose your favorite programs, start a wonderful radio trip. 12 Guide of Using App Functions 6. DOUBAN DOUBAN FM can provide personalized music MHZ. 7. iHeartRadio iHeartRadio is an Internet radio platform owned by iHeartMedia, Inc. Founded in April 2008 as the website iheartmusic.com, iHeartRadio now aggregates audio content from over 800 local iHeartMedia radio stations across the United States, as well as hundreds of other stations and various other media. 13 Guide of Using App Functions 8. XIMALAYA XIMALAYA is one of the largest, most complete audio resource platform in China. 9. Multi mode and solo mode This APP can provide the multi mode function. Enter the âDEVICE LISTâ interface, you can glance the situation of all the devices, like the song, voice volume, voice channel. 14 Guide of Using App Functions 10. Multi mode and solo mode You can see a guide to tell how to switch between solo and multi mode if you click: After finished, Multi mode will be as this: 11. Cloud music preset You can listen to your preset online cloud music playlist anytime once you press the corresponding key on the device. Eg. Set NEW in TTPOD as channel 1: Click Preset icon 15 Guide of Using App Functions 12. Playlist management 12.1 Customize playlist Open the app, choose âMy Playlistâ, click âEditâ, you can add multiple play lists or delete the one you donât need. You can also collect songs in the play list. Click icon + to add new playlist, Eg. Yoga: 16 Guide of Using App Functions You can also delete the playlist: You can click icon on the right of the song list, collect it to the playlist. 17 Guide of Using App Functions Online Upgrade If the device has the latest version of software, when you open the app, it will automatically prompt you to upgrade device software: 1. Upgrade immediately If you donât want to update immediately, you can choose to upgrade later: 18 Guide of Using App Functions Timing Closure New feature: timing closure in 90Mins. 19 Glance at The Function of Each Icon Icon on Playing interface Name of the device DLNA TTPod TuneIn DOUBAN XIMALAYA Click to collect songs in Favorites Click to show the current song list Up or dowm the volumn Click to select song cycling mode Icon on Device List interface Click to add new device Click to view the device information, rename to device, restore the factory Settings, etc Click to get how to switch between solo and multi mode Click to change the left and right channel and stereo matching 20 AUX IN 1. Connect the Headphone/Earphone; Aux out jack or Line out jack from the external audio player(such like MP3 player; Disc-man...etc) to the AUX IN jack on the rear of the unit by the Audio Connection Cable with 3.5mm plugs. 2. Power on the unit and start to play music as usual through the connected external player. 21 FAQ Q: Can't stream music to the device? A: Make sure your phone or PAD are in the same Wi-Fi network as your device. If you use 3rd. music APP, please check if the APP supports Airplay, DLNA or Qplay protocol. Q: Can the APP system be controlled independently by two different phones/tablets at the same time or can it only be controlled with one? A:It can be controlled by different phones / tablets. Q: Can I play my MP3 music collection on the iphone? A: Yes. You just have to install the controller app on the iPhone. In the app, you will see an option to play music on "This iPhone". Q: What kinds of music format does it support? A: Most of the format is available. Such as MP3, WMA, AAC (AAC+), Apple lossless, FLAC, APE, etc. Q:Does it support multi-room playback? A: Yes. Playback the same song in multiple speakers with minimal latency (less than 5 ms) or different songs in multiple speakers with one App. Q: Does the wireless transmission have loss of sound quality? A:No. You mobile devices or other devices just send control instructions, and the adapter will download songs metadata, decoding it and then playback in local speaker, so there is no lose of the music quality through wireless transmission. Q: Does it support R&L channel? A: Yes, this is supported. You can find the sign in APP. 22
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Administrator Create Date : 2016:07:18 16:42:06+08:00 Modify Date : 2016:07:18 16:42:21+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:07:18 16:42:21+08:00 Format : application/pdf Title : C:\Documents and Settings\Administrator\桌面\复件 CMA 3559 BT Speaker JL 131115.doc Creator : Administrator Document ID : uuid:7721dc3d-4cc8-4ba4-8774-e1e23f9d9bf9 Instance ID : uuid:562d04bc-f832-4070-872b-3ecac29f89b5 Page Count : 22EXIF Metadata provided by EXIF.tools