Junlan Electronic SBB06682 BLUETOOTH TOWER SPEAKER User Manual AR2001 OL 07 08 2013 ai

Shenzhen Junlan Electronic Ltd BLUETOOTH TOWER SPEAKER AR2001 OL 07 08 2013 ai

User manual

AR2000 User ManualBk-BGLAR2000BK-BGLSLIM BLUETOOTH SOUNDBAR1.Speaker2.Remote Sensor3.Indicator4.Volume +/- Button5.AUX-IN 2 Jack7.RCA Jacks8.DC IN Jack6.SOURCE/     (Standby) Button2.        /       ( Skip Forward/Backward ) button 1.      Power ON/OFF button7. SOURCE button4. BASS +/- buttons5.       ( Mute ) button3. EQ ( Equalizer ) button6.       ( Play/Pause ) button8. VOL ( Volume ) +/- buttons9. TREBLE +/- buttonsSoundbarUser ManualPower adapter RCA cable Remote control2 screws 2 plastic wall plugs 3.5mm auxiliary cordFig.1 Fig.2 Fig.3- First Time Use1. Push and slide out the battery holder as figure 1 below.3. Close the battery holder.2. Replace the battery with a new CR2025 button cell as the  polarity markings on the rear of the Remote Control. - If the battery is consume, replace it as below: Remove and discard the insulation tab as figure on the right.FRONT VIEW SIDE VIEWTOP VIEWTo Turn the Unit ONTo Turn the Unit OFFConnect the supplied power adapter to the DC IN jack. Then press the SOURCE/    button on the unit or the     button on the remote control.Press and hold the SOURCE/    button on the unit or press the     button on the remote control.AR2000BK-BGLSLIM BLUETOOTH SOUNDBARAUX IN ConnectionAUX IN Playback:RCA AUX IN Connection:RCA AUX IN Playback:Examples of AUX IN sources are personal audio players and computers.1. Connect a 3.5 mm auxiliary cord (included) between your audio player and the AUX-IN 2 Jack on the right side of the Soundbar. 2. Press the SOURCE/    button on the unit or the     button on the remote control to turn on the Soundbar.3. Press the SOURCE/    button on the unit or the  SOURCE button on  the remote control repeatedly until the indicator turns Orange.4. Set your personal audio player to play.Press the      button on the remote control to turn the sound OFF. Press again to resume sound. remote control to adjust the volume level.Press the Bass+/- button on the remote control to adjust the bass level.Press the Treble+/- button on the remote control to adjust thetreble level.Press the EQ button on the remote control to switch theequilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.Press the Volume+/- button on the unit or the VOL+/- button on theExamples of  RCA AUX IN sources are television sets, DVD players.and VCR players.1. Connect RCA cord (included) between your audio player and the AUX-IN 1 Jacks on the top of the Soundbar. 2. Press the SOURCE/    button on the unit or the     button on the remote control to turn on the Soundbar.3. Press the SOURCE/    button on the unit or the  SOURCE button   on the remote control repeatedly until the indicator turns Green.4. Set your personal external player to play.Press the      button on the remote control to turn the sound OFF. Press again to resume sound. remote control to adjust the volume level.Press the Bass+/- button on the remote control to adjust the bass level.Press the Treble+/- button on the remote control to adjust thetreble level.Press the EQ button on the remote control to switch theequilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.Press the Volume+/- button on the unit or the VOL+/- button on the1. Press the SOURCE/    button on the unit or the     button on the remote control to turn on the Soundbar.2. Press the SOURCE/    button on the unit or the  SOURCE button  on the remote control repeatedly until the indicator turns Blue.3. Keep the unit and the Bluetooth enabled device within 3 feet ofeach other during the pairing process.4.Set your mobile phone or other Bluetooth enabled device tosearch for Bluetooth devices.BLUETOOTH Playback:Press the      button on the remote control to turn the sound OFF. Press again to resume sound. the remote control to adjust the volume level.Press the Bass+/- button on the remote control to adjust the bass level.Press the Treble+/- button on the remote control to adjust thetreble level.Press the EQ button on the remote control to switch theequilibrium between POP/JAZZ/CLASSIC/ROCK/NORMAL.Press the Volume+/- button on the unit or the VOL+/- button on Press the      or      button on the remote control to skip to next or previous track. Press the     button to pause playing track. Press again to resume playing.22.4 inches22.4 incheswithin 3 feetGo to SETTINGS>GENERAL>BLUETOOTH(Make sure Bluetooth is turned ON)Go to SETTINGS>OPTIONS>BLUETOOTHEnable BLUETOOTHOn a BlackberryOn an Android PhoneOn an iPhoneGo to SETTINGS>BLUETOOTH>MENU>Searchfor devices(Make sure Bluetooth is turned ON)On other Cell Phone/DevicesReview the instruction manual that came with yourphone/device.Mounting on wooden wallMounting on brick wallFixing PlugScrewFixing PlugScrewScrewScrew2. Drill the supplied screws directly into the  1. Mark the position of the mounting screws on the wall using a pencil.marks that you have made on the wall and leave approx. 0.3 inch length to hook the sound bar.3. Put the sound bar onto the mounting screws. Make sure they are firm and stable.3. Insert the supplied fixing plug and hammer into the holes.length to hook the sound bar.2. Drill 2 holes by a powerful electric drill ( Not Supplied ).1. Mark the position of the mounting screws on the wall using a pencil.4. Secure the supplied screws into the fixing plugs and leave approx. 0.3 inch5. Put the sound bar onto the mounting screws. Make sure they are firm and stable.The volume may be too low. Try increasing the volume bypressing Volume+ button on the speaker or VOL+ buttonon the remote control.The connected device might not be in playback mode.Play music the connected Bluetooth device.The sound output of the connected device is weak. Increase the volume of the connected Bluetooth device.The sound output of the connected device may be too high. Try reducing the volume of the connected Bluetooth device.The volume may be too high. Try reducing the volume bypressing Volume- button on the speaker or VOL- buttonon the remote control.Make sure no other devices are connected to the Soundbarand try the connection again. If a device was connected tothe speaker, unpair it before connecting your new device.Dothis using your Bluetooth device's Bluetooth menu.Battery Installation for Remote Control

Navigation menu