Junlan Electronic SBB33312 SOUNDBAR User Manual

Shenzhen Junlan Electronic Ltd SOUNDBAR

User manual

PLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCEMODEL:SB32--INSTALLATION AND OPERATION MANUAL--OPT FM BT TV DVD AUXUSB
TABLE OF CONTENTSIMPORTANT SAFETY INSTRUCTIONS.........................................................2-3GENERAL VIEW.................................................................................................5SPECIFICATIONS............................................................................................TROUBLESHOOTING GUIDE.........................................................................15USB...................................................................................................................14AUX IN...............................................................................................................1 3CONNECT TO TV/DVD.....................................................................................13CONNECT USING OPTICAL............................................................................12LISTEN TO FM RADIO.....................................................................................BLUETOOTH PAIRING AND PLAYBACK........................................................106PLACING AND MOUNTING............................................................................... 4PACKING LIST....................................................................................................1INTRODUCTION.................................................................................................1FEATURES..........................................................................................................1REMOTE CONTROL..........................................................................................7GENERAL OPERATIONS..................................................................................9ADDING OPTIONAL EXTERNAL SUBWOOFER.............................................11BATTERY INSTALLATION--REMOTE CONTROL............................................89
Features of the Connexx SB32 soundbar stereo include:Digital FM tuner w/10 presetsBluetooth wireless technologyBuilt-in subwoofer (w/optional external subwoofer as an add-on accessory)3.5 mm aux input jack on front panelUSB input on front panel w/device charging capabilitiesDigital Optical input on rear panel2 analog stereo inputs on rear panelWireless remote control includedThank you for choosing a Connexx product. We hope you will find the Instructions in this owner's manual clear and easy to follow. If you take a few minutes to review, you will learn how to use all of the features of your new soundbar stereo for maximum enjoyment.User Manual Wall Mounting BracketsFM AntennaRemote Control with Two BatteriesMain Unit1AAAAAAINTRODUCTIONFEATURESPACKING LISTPLEASE READ INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCEMODEL:SB32--INSTALLATION AND OPERATION MANUAL--OPTFMBT TV DVD AUXUSBPower Harness Adapter (Optional)Audio Connection Cable FUSE -+-+-+
This unit has a long cord that can easily be tripped on or pulled on, causing injury, Please make sureUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDThe lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or trippedover accidentally.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENFCC NOTICE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications.● Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.● Connect the equipment into an outlet with a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.1 ) Read these instructionsAll the safety and operating instructions should be read before the product is operated.2 ) Keep these instructionsThe safety and operating instructions should be retained for future reference.3 ) Heed all warningsAll warnings on the product and in the operating instructions should be adhered to.4 ) Follow all instructionsAll operating and use instructions should be followed.5 ) Do not use this apparatus near waterDo not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.FCC WARNING:To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device.2However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
8 ) Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus(including amplifiers) that produce heat.9 ) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than other. A grounding type plug has two blades and athird grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician for replacement of theobsolete outlet.10 ) Protect the power cord from being walked on or pinched particularly at plugs, conveniencethe apparatus.13 ) Refer all servicing to qualified service personnel. Servicing is required when the apparatusapparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.14 ) Power sourceThis product should be operated only from the type of power source indicated on the marking label.refer to the operation instructions.15 ) ServiceDo not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.6 ) Clean only with dry clothUnplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosolcleaners. Use a dry cloth for cleaning.7)Do not block any ventilation openings. Install in accordance with the manufacturer's instructionsSlots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.receptacles, and the point where they exit from has been damaged in any way, such as power-supply cord or plug is damaged, liquid has the been objects have fallen into or spilled3WARNING:To reduce the risk of fire or electric shock, do or splashing and that objects vases shall not be placed on apparatus.11 ) Only use attachments/accessories specified by the manufacturer.12 ) Unplug this apparatus during lightning storms or when unused for long periods of timeTo protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.lightning and power-line surges.This will prevent damage to the product due to not expose this apparatus to rain or moisture. The apparatus shall not be exposed to drippingfilled with liquids, such as WARNING:WARNING:WARNING: supply dealer or to your home, consult your appliance If you are not sure of the type of powerlocal power company. For products intended to operate from battery power, or other source,
2. Mounting the Sound Bar onto a wallWe recommend having this Sound Bar professionally mounted. By using the included wall mounting accessories, the Sound Bar can be mounted onto a wall.Distance between two brackets1. Placing on the tableWhen placing the Sound Bar on an entertainment center, bookshelf, or any type of oduce a potential heat hazard.24.6 inchesPLACING AND MOUNTINGspace around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could pr4enclosed space, be sure to allow
GENERAL VIEWFront ViewRear View23456789110121. LED Display2. AUX IN Jack3. USB Jack5. Volume Down 9. PAIR Button10. SOURCE Button12. Remote Sensor7. NEXT/TUNE Up8. Volume Up3.TV Audio In Jack2.DVD Audio In Jack4.Subwoofer Switch5.External Subwoofer Connector6.Optical In Jack3256711. POWER Button4. PREVIOUS/TUNE Down116. Play/Pause/ Preset/Memory/Preset Play Button511.ANTENNA Jack47.DC In Jack
876541231. POWER button10. TV Mode Switch button7. OPTICAL Mode Switch buttonREMOTE CONTROLOPTICALBT USBFMTVDVDAUX INPAIR MUTEറͬറPOWER1239101112132. Bluetooth Mode Switch button3. AUX IN Mode Switch button8. USB Mode Switch button9. FM Mode Switch button11. DVD Mode Switch button12. MUTE button13. PAIR button4. ( Play/Pause )/ ( Memory/Preset /Preset Play )button6VOL- VOL+റͬറ റͬറTUN- TUN+5. TUNE - / /TUNE+ button6. VOL ( Volume )+/- buttons
BATTERY INSTALLATION--- REMOTE CONTROLBattery InstallationRemote Control Effective Rangecontrol of the unit, the remote control may not operate properly. When there is an obstacle between the unit and the remote control, the remote control may not operate properly.When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the remote Battery Precaution1.Slide and lift the battery door (Figure 1).2.Install 2 (two) AAA size batteries into the battery compartment as indicated by the polarity markings (Figure 2).3.Replace the battery door (Figure 3).7
3. During Playback:~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired.GENERAL OPERATIONS1. Press the Power button on the unit or remote control to power on the unit from standby mode.Follows the order below:2. The default mode is "FM". Press the SOURCE button repeatedly to switch to desired mode.4. When finished listening, press the Power button to power off the unit.5. If the unit is not used for long period of time, please disconnect power.OPT FM BT TV DVD AUXUSB8~ Press Mute button on the Remote Control to mute the sound, press again to resume.
FM Antenna2. Press the SOURCE button repeatedly until FM appears on the display.3. Press and hold the /TUNE - or /TUNE + buttons and then release, The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and extend the wire or relocate the wire to improve the radio reception.LISTEN TO FM RADIOBLUETOOTH PAIRING AND PLAYBACK3. Turn on the external BT Device and enter BT searching mode. Startto the user's manual of your BT Device. )Notes:display of the external BT Device.Pairing code "0000" may need to be entered.Normal operation after paired:pairing as the screen instructions on the external BT Player. ( For details pairing procedures, please referBT ( Bluetooth ):2. Press the SOURCE button repeatedly until "BT" appears on display. ~ ~ Pairing the unit to external BT Device as follows:Normal operation after paired:The unit will start to search next ( or previous ) available FM radio station then plays.5. Press button on remote control to play the preset stored station. location(such as Pxx.), then press button to change the storage lacation, press and A total of 10 stations can be stored into the unit's memory.hold the button to complete station storage. When the external BT Device searched the unit, will appear on the--Press the VOL (Volume)-/+ buttons to adjust volume level as desired.റͬററͬററͬറ4. When a station searched, press and hold the button to display the desired storage റͬറ"SB32"BT ( Bluetooth ):Pairing the unit to external BT Device as follows:Pairing the unit to external BT Device as follows:91. Power ON the unit.Or press FM on Remote Control.1. Power ON the unit.Or press BT on Remote Control.--Press the /TUNE - or /TUNE + buttons to skip to previous or next track. 4. Press "PAIR" button on remote control or front panel to disconnect current pairing and try to pair with other device.--Press the button to play or pause.
ADDING OPTIONAL EXTERNAL SUBWOOFER+-There is a SPEAKER SELECTOR on the back of the unit to turn on or turn off the internal subwoofer output or external subwoofer output.IN(Internal subwoofer)-- When the switch is moved to "IN" position, there will be no audio output from the external subwoofer.EX(External subwoofer)- When the switch is moved to "EX" position, there will be no audio output from the internal subwoofer. NOTE: Before connecting, disconnect power.1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear of the unit as the figure above.2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.3. Slide the selector to "EX" position as figure above.5. Play the music as usual and set the desired volume. 104. Power ON the unit.
CONNECT USING OPTICAL 3. Power ON the unit.1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear of the unit as pictured above.2. Connect the other end to the DVD or TV back panel.4. Press the SOURCE button repeatedly until the "OPT" appears on display.NOTE: Before connecting, disconnect power.DVD or TVOptical Cable(Not Supplied)5. Play the music as usual and set the desired volume. 11Or press OPTICAL on Remote Control.NOTE:If there is no audio output (only picture) when your TV or DVD player is connected to the soundbar, please check DVD audio setting, and set the digital output to PCM format.
DVD CONNECT TO TV/DVDNOTE: Before connecting, disconnect power.WhiteRedWhiteRed1. Connect as the figure above.5. Play the audio as usual and set the desired volume. 3. Press the SOURCE button repeatedly until "TV" appears on display.TV audio is selected and will play through the unit.4. Press the SOURCE button repeatedly until "DVD" appears on display.DVD audio is selected and will play through the unit.TV122. Power ON the unit. Or press TV on Remote Control.Or press DVD on Remote Control.NOTE: Before connecting, disconnect power.WhiteRed
4. Press the SOURCE button repeatedly until "AUX" appears on display.1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as iPod, iPhone, iPad, MP3 player, Discman... etc. )5. Play the music in the external player as usual and set the desired volume.AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES unit as pictured above.USB : LISTEN TO EXTERNAL AUDIO DEVICESUSB3. Insert the USB, then press the SOURCE button repeatedly until "USB" appears on screen.4. Play the music in the external player as usual and set the desired volume.1. Insert the USB as in the figure above.~ Press button on the Remote Control to play or pause.~ Press or button on the Remote Control to skip to next or previous track.NOTE:The USB port can also be used for charging.13Or press AUX IN on Remote Control.3. Power ON the unit. Or press USB on Remote Control.2. Power ON the unit.NOTE:NOTE:NOTE:
6<03720 3266,%/(&$86( 3266,%/(628/7,21Reduce the bass level of the connecteddevicePress the SOURCE button repeatedly to set the input source to the desired modeNo powerNo soundSound distortionRemote not working Bluetooth reception failureHave not paired consumedThe batteries are The external device is too far from the unitVolume level too highBass level of the connected device too highInput source incorrectThe connected device is not in playback modeVolume in minimum positionPower cable not connected Raise volume level by pressing the VOL (Volume) + buttonPlay the music/movie in the connected device as usual and make sure the volume level of it is in high levelVOL (Volume ) - buttonReduce the volume level by pressing the Replace with new batteriesMove the external BT device closer to the unitPair both units TROUBLESHOOTING GUIDE~Check 12V connection14~Check fuseCheck the following guide before requesting serviceCheck the following guide before requesting serviceor blown fuse
zMax Power Consumption...........................................................................................................40WRadio Coverage ...............................................................................................FM 87.5 -108.0 MHBluetooth Effective Range.............................................................................................Up to 30 feet Remote Effective Range................................................................................................Up to 15 feet (Measured in open area. Wall and structures may affect the effective range.) Power Supply Requirement................................................................DC 12 Volts, Negative Ground15Operation Voltage...........................................................................................................DC10V-14V Overall Dimension..................................................................................813(W)x107.2(H)x83(D)mmDevice and Accessories Net Weight.............................................................................2.2kg(4.85 lb)SPECIFICATIONSSpecifications subject to change without notice.(1) The device may cause harmful interference. andNOTE:The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions.(2) This device must accept any interference received, including the interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE.FCC WARNINGS:FCC WARNINGS:NOTE:Receiver Coverage
www.riverparkinc.com2014 RIVERPARK Inc.V. 020814C

Navigation menu