Junlan Electronic SBB33312 SOUNDBAR User Manual
Shenzhen Junlan Electronic Ltd SOUNDBAR
User manual
PLEASE READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
MODEL:SB32
--INSTALLATION AND OPERATION MANUAL--
OPT FM BT TV DVD AUX
USB
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.........................................................2-3
GENERAL VIEW.................................................................................................5
SPECIFICATIONS............................................................................................
TROUBLESHOOTING GUIDE.........................................................................
15
USB...................................................................................................................
14
AUX IN..............................................................................................................
.1 3
CONNECT TO TV/DVD.....................................................................................
13
CONNECT USING OPTICAL............................................................................
12
LISTEN TO FM RADIO.....................................................................................
BLUETOOTH PAIRING AND PLAYBACK........................................................
10
6
PLACING AND MOUNTING............................................................................... 4
PACKING LIST....................................................................................................1
INTRODUCTION.................................................................................................1
FEATURES..........................................................................................................1
REMOTE CONTROL..........................................................................................
7
GENERAL OPERATIONS..................................................................................
9
ADDING OPTIONAL EXTERNAL SUBWOOFER.............................................
11
BATTERY INSTALLATION--REMOTE CONTROL............................................
8
9
Features of the Connexx SB32 soundbar stereo include:
Digital FM tuner w/10 presets
Bluetooth wireless technology
Built-in subwoofer (w/optional external subwoofer as an add-on accessory)
3.5 mm aux input jack on front panel
USB input on front panel w/device charging capabilities
Digital Optical input on rear panel
2 analog stereo inputs on rear panel
Wireless remote control included
Thank you for choosing a Connexx product. We hope you will find the Instructions
in this owner's manual clear and easy to follow. If you take a few minutes to
review, you will learn how to use all of the features of your new soundbar stereo
for maximum enjoyment.
User Manual Wall Mounting Brackets
FM Antenna
Remote Control with Two Batteries
Main Unit
1
AAA
AAA
INTRODUCTION
FEATURES
PACKING LIST
PLEASE READ INSTRUCTIONS CAREFULLY
AND KEEP FOR FUTURE REFERENCE
MODEL:SB32
--INSTALLATION AND OPERATION MANUAL--
OPTFMBT TV DVD AUX
USB
Power Harness Adapter (Optional)
Audio Connection Cable
FUSE -
+
-
+
-
+
This unit has a long cord that can easily be tripped on or pulled on, causing injury, Please make sure
USE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORDUSE UNDER SUPERVISION OF AN ADULT DUE TO LONG CORD
The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
it is arranged so it will not drape over a tabletop, etc. Where it can be pulled on by children or tripped
over accidentally.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FCC NOTICE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not Installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
● Reorient or relocate the receiving
antenna. Increase the separation between
the equipment and receiver.
● Connect the equipment into an outlet
with a circuit different from that to which the
receiver is connected.
● Consult the dealer or an experienced
radio/TV technician for help.
Before using the unit, be sure to read all
operating instructions carefully. Please note
that these are general precautions and may
not pertain to your unit.
1 ) Read these instructions
All the safety and operating instructions should
be read before the product is operated.
2 ) Keep these instructions
The safety and operating instructions should
be retained for future reference.
3 ) Heed all warnings
All warnings on the product and in the
operating instructions should be adhered to.
4 ) Follow all instructions
All operating and use instructions should be
followed.
5 ) Do not use this apparatus near water
Do not use this product near water and
moisture, for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet
basement; or near a swimming pool.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE THE RECOMMENDED
ACCESSORIES ONLY.
FCC WARNING:
To assure continued compliance, follow the
attached installation instructions and use only
shielded cables when connecting to other
devices. Modifications not authorized by the
manufacturer may void user`s authority to
operate this device.
2
However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause
harmful interference to radio or
television
reception,
which can be determined by
turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
8 ) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce
heat.
9 ) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 ) Protect the power cord from being
walked on or pinched particularly at plugs,
convenience
the apparatus.
13 ) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus
apparatus, the apparatus has been exposed to
rain or moisture does not operate normally, or
has been dropped.
14 ) Power source
This product should be operated only from the
type of power source indicated on the marking
label.
refer to the operation instructions.
15 ) Service
Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer all servicing to qualified service
personnel.
6 ) Clean only with dry cloth
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for cleaning.
7)Do not block any ventilation
openings. Install in accordance with the
manufacturer's instructions
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation, to
ensure reliable operation of the product and
to protect it from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug or other similar surface.
This product should never be placed near or
over a radiator or heat source. This product
should not be placed in a built-in installation
such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's
instructions have been adhered to.
receptacles, and the point where
they exit from
has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has the been objects have fallen into or spilled
3
WARNING:
To reduce the risk of fire or electric shock, do
or splashing and that objects
vases shall not be placed on apparatus.
11 ) Only use attachments/accessories
specified by the manufacturer.
12 ) Unplug this apparatus during lightning
storms or when unused for long periods of
time
To protect your product from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system.
lightning and power-line surges.
This will prevent damage to the product
due to
not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping
filled with liquids,
such as
WARNING:WARNING:WARNING:
supply
dealer or
to your home, consult your appliance
If you are not sure of the type of power
local power company. For products
intended to operate from battery power, or other
source,
2. Mounting the Sound Bar onto a wall
We recommend having this Sound Bar professionally mounted. By using the included
wall mounting accessories, the Sound Bar can be mounted onto a wall.
Distance between two brackets
1. Placing on the table
When placing the Sound Bar on an entertainment center, bookshelf, or any type of
oduce a potential heat hazard.
24.6 inches
PLACING AND MOUNTING
space around the Sound Bar for ventilation.
If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from
the Sound Bar could pr
4
enclosed space, be sure to allow
GENERAL VIEW
Front View
Rear View
2
3456789
1
10
12
1. LED Display
2. AUX IN Jack
3. USB Jack
5. Volume Down 9. PAIR Button
10. SOURCE Button
12. Remote Sensor
7. NEXT/TUNE Up
8. Volume Up
3.TV Audio In Jack
2.DVD Audio In Jack
4.Subwoofer Switch
5.External Subwoofer Connector
6.Optical In Jack
3
2567
11. POWER Button
4. PREVIOUS/TUNE Down
11
6. Play/Pause/ Preset/
Memory/Preset Play Button
5
1
1.ANTENNA Jack
4
7.DC In Jack
8
7
6
5
4
1
2
3
1. POWER button
10. TV Mode Switch button
7. OPTICAL Mode Switch button
REMOTE CONTROL
OPTICAL
BT USB
FM
TV
DVD
AUX IN
PAIR MUTE
റͬറ
POWER
1
2
3
9
10
11
12
13
2. Bluetooth Mode Switch button
3. AUX IN Mode Switch button
8. USB Mode Switch button
9. FM Mode Switch button
11. DVD Mode Switch button
12. MUTE button
13. PAIR button
4. ( Play/Pause )/ ( Memory/
Preset /Preset Play )button
6
VOL- VOL+
റͬറ റͬറ
TUN- TUN+
5. TUNE - / /TUNE+ button
6. VOL ( Volume )+/- buttons
BATTERY INSTALLATION--- REMOTE CONTROL
Battery Installation
Remote Control Effective Range
control of the unit, the remote control may not operate properly.
When there is an obstacle between the unit and the remote control, the remote control may
not operate properly.
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light
shines on the remote
Battery Precaution
1.Slide and lift the battery door (Figure 1).
2.Install 2 (two) AAA size batteries into the battery compartment as indicated
by the polarity markings (Figure 2).
3.Replace the battery door (Figure 3).
7
3. During Playback:
~ Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
GENERAL OPERATIONS
1. Press the Power button on the unit or remote control to power on the unit from standby mode.
Follows the order below:
2. The default mode is "FM". Press the SOURCE button repeatedly to switch to desired mode.
4. When finished listening, press the Power button to power off the unit.
5. If the unit is not used for long period of time, please disconnect power.
OPT FM BT TV DVD AUX
USB
8
~ Press Mute button on the Remote Control to mute the sound, press again to resume.
FM Antenna
2. Press the SOURCE button repeatedly until FM appears on the display.
3. Press and hold the /TUNE - or /TUNE + buttons and then release,
The antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
LISTEN TO FM RADIO
BLUETOOTH PAIRING AND PLAYBACK
3. Turn on the external BT Device and enter BT searching mode. Start
to the user's manual of your BT Device. )
Notes:
display of the external BT Device.
Pairing code "0000" may need to be entered.
Normal operation after paired:
pairing as the screen
instructions on the external BT Player.
( For details pairing procedures, please refer
BT ( Bluetooth ):
2. Press the SOURCE button repeatedly until "BT" appears on display.
~
~
Pairing the unit to external BT Device as follows:
Normal operation after paired:
The unit will start to search next ( or previous ) available FM radio station then plays.
5. Press button on remote control to play the preset stored station.
location(such as Pxx.), then press button to change the storage lacation, press and
A total of 10 stations can be stored into the unit's memory.
hold the button to complete station storage.
When the external BT Device searched the unit, will appear on the
--Press the VOL (Volume)-/+ buttons to adjust volume level as desired.
റͬറ
റͬറ
റͬറ
4. When a station searched, press and hold the button to display the desired storage
റͬറ
"SB32"
BT ( Bluetooth ):
Pairing the unit to external BT Device as follows:Pairing the unit to external BT Device as follows:
9
1. Power ON the unit.
Or press FM on Remote Control.
1. Power ON the unit.
Or press BT on Remote Control.
--Press the /TUNE - or /TUNE + buttons to skip to previous or next track.
4. Press "PAIR" button on remote control or front panel to disconnect current pairing and try to
pair with other device.
--Press the button to play or pause.
ADDING OPTIONAL EXTERNAL SUBWOOFER
+
-
There is a SPEAKER SELECTOR on the back of the unit to turn on or turn off the internal subwoofer
output or external subwoofer output.
IN(Internal subwoofer)-- When the switch is moved to "IN" position, there will be no audio output
from the external subwoofer.
EX(External subwoofer)- When the switch is moved to "EX"
position, there will be no audio output
from the internal subwoofer.
NOTE: Before connecting, disconnect power.
1. Connect one end of subwoofer connection cable ( not supplied ) to the "+" Jack on the rear
of the unit as the figure above.
2. Connect the other end to the "-" Jack on the rear of the unit as the figure above.
3. Slide the selector to "EX" position as figure above.
5. Play the music as usual and set the desired volume.
10
4. Power ON the unit.
CONNECT USING OPTICAL
3. Power ON the unit.
1. Connect one end of optical connection cable ( not supplied ) to the optical jack on the rear
of the unit as pictured above.
2. Connect the other end to the DVD or TV back panel.
4. Press the SOURCE button repeatedly until the "OPT" appears on display.
NOTE: Before connecting, disconnect power.
DVD or TV
Optical Cable(Not Supplied)
5. Play the music as usual and set the desired volume.
11
Or press OPTICAL on Remote Control.
NOTE:
If there is no audio output (only picture) when your TV or DVD player is connected
to the soundbar, please check DVD audio setting, and set the digital output to PCM format.
DVD
CONNECT TO TV/DVD
NOTE: Before connecting, disconnect power.
White
Red
White
Red
1. Connect as the figure above.
5. Play the audio as usual and set the desired volume.
3. Press the SOURCE button repeatedly until "TV" appears on display.
TV audio is selected and will play through the unit.
4. Press the SOURCE button repeatedly until "DVD" appears on display.
DVD audio is selected and will play through the unit.
TV
12
2. Power ON the unit.
Or press TV on Remote Control.
Or press DVD on Remote Control.
NOTE: Before connecting, disconnect power.
White
Red
4. Press the SOURCE button repeatedly until "AUX" appears on display.
1. Connect one end of audio connection cable (not supplied) to the AUX IN jack on the front of the
2. Connect the other end to the Audio out/Line out/Phone jack on the external player ( such as
iPod, iPhone, iPad, MP3 player, Discman... etc. )
5. Play the music in the external player as usual and set the desired volume.
AUX IN : LISTEN TO EXTERNAL AUDIO DEVICES
unit as pictured above.
USB : LISTEN TO EXTERNAL AUDIO DEVICES
USB
3. Insert the USB, then press the SOURCE button repeatedly until "USB" appears on screen.
4. Play the music in the external player as usual and set the desired volume.
1. Insert the USB as in the figure above.
~ Press button on the Remote Control to play or pause.
~ Press or button on the Remote Control to skip to next or previous track.
NOTE:
The USB port can also be used for charging.
13
Or press AUX IN on Remote Control.
3. Power ON the unit.
Or press USB on Remote Control.
2. Power ON the unit.
NOTE:NOTE:NOTE:
6<03720 3266,%/(&$86( 3266,%/(628/7,21
Reduce the bass level of the connected
device
Press the SOURCE button repeatedly to
set the input source to the desired mode
No power
No sound
Sound distortion
Remote not
working
Bluetooth
reception failure
Have not paired
consumed
The batteries are
The external device is too far
from the unit
Volume level too high
Bass level of the connected
device too high
Input source incorrect
The connected device is not
in playback mode
Volume in minimum position
Power cable not connected
Raise volume level by pressing the VOL
(Volume) + button
Play the music/movie in the connected
device as usual and make sure the
volume level of it is in high level
VOL (Volume ) - button
Reduce the volume level by pressing
the
Replace with new batteries
Move the external BT device closer to the
unit
Pair both units
TROUBLESHOOTING GUIDE
~Check 12V connection
14
~Check fuse
Check the following guide before requesting serviceCheck the following guide before requesting service
or blown fuse
z
Max Power Consumption...........................................................................................................40W
Radio Coverage ...............................................................................................FM 87.5 -108.0 MH
Bluetooth Effective Range.............................................................................................Up to 30 feet
Remote Effective Range................................................................................................Up to 15 feet
(Measured in open area. Wall and structures may affect the effective range.)
Power Supply Requirement................................................................DC 12 Volts, Negative Ground
15
Operation Voltage...........................................................................................................DC10V-14V
Overall Dimension..................................................................................813(W)x107.2(H)x83(D)mm
Device and Accessories Net Weight.............................................................................2.2kg(4.85 lb)
SPECIFICATIONS
Specifications subject to change without notice.
(1) The device may cause harmful interference. and
NOTE:
The device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions.
(2) This device must accept any interference received, including the interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE.
FCC WARNINGS:FCC WARNINGS:
NOTE:
Receiver Coverage
www.riverparkinc.com
2014 RIVERPARK Inc.
V. 020814
C