Junlan Electronic STVG569BT Bluetooth Karaoke Player User Manual 559WIBESF120516

Shenzhen Junlan Electronic Ltd Bluetooth Karaoke Player 559WIBESF120516

User manual

STVG569BT
WARNINGSE1ENGLISHE1WARNING:TO REDUCE THE RISK OFFIRE OR SHOCK HAZARD, DO NOT EXPOSETHIS PRODUCT TO RAIN OR MOISTURE.CAUTION: TO PREVENT THE RISK OFELECTRIC SHOCK, DO NOT REMOVE COVEROR BACK. NO USER-SERVICEABLE PARTSINSIDE. REFER SERVICING TO QUALIFIEDPERSONNEL.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENThis symbol is intended to alert youto the presence of uninsulateddangerous voltage within theproduct's enclosure that might be ofsufficient magnitude to constitute arisk of electric shock. Do not openthe product's case.This symbol is intended to informyou that important operating andmaintenance instructions areincluded in the literatureaccompanying this product.DRIPPING WARNINGVENTILATION WARNINGWarning:SAFETY CERTIFICATIONThe product shall not be exposed to dripping orsplashing and that no objects filled with liquids, suchas vases, shall be placed on the product.The normal ventilation of the product shall not beimpeded for intended use.Changes or modifications to this unit notexpressly approved by the party responsible forcompliance could void the user’s authority tooperate the equipment.This device is made and tested to meet safetystandards of the FCC, requirements andcompliance with safety performance of the U.S.Department of Health and Human Services, andalso with FDA Radiation Performance Standards21 CFR Subchapter J.Main plug is used as disconnect device and itshould remain readily operable during intendeduse. In order to disconnect the apparatus from themains completely, the main plug should bedisconnected from the main socket outletcompletely.Warnings:!!!This CD player employs a laser light beam.Only a qualified service person shouldremove the cover or attempt to service thisdevice, due to possible eye injury.The use of controls, adjustments, orprocedures other than those specifiedherein might result in hazardous radiationexposure.This compact disc player is classified as aCLASS 1 LASER product.The CLASS 1 LASER PRODUCT label islocated on the rear panel.The apparatus shall be used in an openarea.CAUTIONThe CAUTION marking is located on the rear panel.Class II equipment symbolThis symbol indicates that the unithas a double insulation system.CAUTION!Invisible laser radiation when open and inter locks defeated.Avoid exposure to beam.FCC IMPORTANTSince CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner.This device complies with part 15 of the FCC rules, operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.RF Exposure StatementTo maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.CAN ICES-3(B)/NMB-3(B)
ENGLISHE2WARNINGSNOTE This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as:set out in the Radio Interference Regulations of Industry Canada These limits are designed to provide reasonable.protection against harmful interference in a residential installation This equipment generates uses and can radiate.,radio frequency energy and if not installed and used in accordance with the instructions may cause harmful,,interference to radio communications However there is no guarantee that interference will not occur in a particular.,installation If this equipment does cause harmful interference to radio or television which can be determined by.(turning the equipment off the user is encouraged to try to correct the interference by one or more of the following),measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio TV technician for help/.IMPORTANT SAFETY INSTRUCTIONS!!!!1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer'sinstructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or otherapparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug has two blades with one wider than the other. A grounding type plug has twoblades and a third grounding prong. The wide blade or the third prong are provided foryour safety. If the provided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs,convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by themanufacturer, or sold with the apparatus. When a cart is used, usecaution when moving the cart/apparatus combination to avoid injuryfrom tip-over.13. Unplug this apparatus during lightning storms or when unused for longperiods of time.14. Refer all servicing to qualified service personnel. Servicing is required when theapparatus has been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does not operate normally, or hasbeen dropped.
/PAIRCDG/BT(STOP)/PAIRPAIR
E4ENGLISHREAR VIEW21 232422 25262022. LINE IN Jack21. MIC 1 Jack20. MIC 2 Jack23. DC Jack (DC 5.8V)CDG TRK 8/8 00:16:04PLAYING TIME- REPEAT ONE1A- REPEAT ALL- NO REPEAT FUNCTIONREPEAT MODEPLAY/PAUSE/STOP INDICATOR- PLAYING MODE- PAUSE MODE- STOP MODEPLAYING TRACK NUMBERAND TOTAL TRACK NUMBER- CD PLAYINGPLAYING DISC MODE- CDG PLAYINGCDGCDDISPLAY24. AUX OUTJack (L)25. AUX OUTJack (R)26. VIDEO OUTJack
5.8
AUDIO OUTPUT AUDIO INPUTAUDIO OUTPUT AUDIO INPUT
E7E7CD OR CD+G OPERATIONENGLISHThis unit is designed to play CDs and CD+Gs bearing the identification logo . If the disc does notconform to the standard, it may not play properly.respectivelyTo turn on the unit, press the ON/OFF button, the ON/OFF LED Indicator will light up.To turn it off, press the ON/OFF button again, the ON/OFF LED Indicator will turn off.Open the CD door, place a CD or CD+G disc in the compartment with the printed side facing upward andGently close the CD dAdjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.To start playing, press the PLAY/PAUSE buttoIf the STOP button is pressed in the courseRotate to the MASTER VOLUME control to obtain the desired sound level.During STOP mode you can skip forward or back to your desired track number by pressingSKIP buttons - SKIP -To resume playing the selected song press PLAY PAUSE buttonWhen playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will search at highspeed in the forward or backward direction. Normal play will continue when you release the button.To repeat the track currently playing, press the REPEAT button once.To repeat all tracks, press the REPEAT buttbegin.To clear the REPEAT function, press the REPEAT button agaTURNING POWER ON/OFF!!!!!!!!!!!LOADINGADISCPLAY/PAUSESTOPMASTER VOLUMESKIP (For both CD and CDG discs)SEARCH (For audio CD disc only)REPEATNote:(Refer to the Trouble Shooting Guide if a disc is loaded but the total tracks do not appear.)Note:Note: The MIC Volume must be adjusted simultaneously with the master volume level.- Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit.- Only place one disc on the disc tray at a time.- Pressing pause repeatedly when a CD+G is playing may cause distorted lyrics on your TV screen. Any distortion willremain on the TV screen until it is refreshed either during an instrumental break or the song is stopped and/or thesong is started from the beginning.,().,/ .theoor. The monitor will display total number of tracks. (If no disc is loaded, it willdisplay “NO DISC”.)n. The first track and total number of tracks will bedisplayed on the monitor.To temporarily stop playing, press the PLAY/PAUSE button. The PAUSE indicator will be displayed.To resume play, press this button again.of playing, the disc will cease to play. (The STOP indicator will beshown on the window.)The REPEAT ONE ( )indicator will lght up.on twice. The REPEAT ALL ( ) indicator will light up.Press the PLAY/PAUSE button toin. The NO REPEAT ( ) indicator willturn on.!!1Athe shiny side facing down. Press the CDG/BT button to switch to CD mode.
PROGRAM!!Use this button to program and play back songs in a preselected order.Step 1: Programming should be done in the stop mode only.Step 2: Press the SKIP buttons ( - SKIP - ) to select a desired track.Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up to a maximum of 24 tracks.Step 4: Press PLAY button when you have completed programming and you are ready to start singing.Press the STOPbutton twice to clear all the programmed entries.MONITOR ON/OFFKARAOKE FUNCTIONS!Press MONITOR ON/OFF button to ON if you want to display a CDG lyrics on the Singing Machine’smonitor.Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on the unit.Adjust the MIC VOLUME control to a desired level and obtain the best performance.Adjust the ECHO control to enhance your voice for a concert hall effect.Adjust the BALANCE control to separate the prerecorded singer’s voice and music when using a multiplex karaoke disc.AUTO VOICE CONTROL can be activated by rotating the Auto Voice Control knob to right. The vocals on the multiplexrecording will be muted when using the microphone When the microphone is not in use the pre-recorded vocals willresume on a multiplex disc.DDWarning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resistthe urge to swing the microphone around by the cord!Warning - To avoid Microphone feedback please avoid being too close to the speaker.MIC VOLUMEECHOBALANCEAUTO VOICE CONTROL.(MULTIPLEX DISCS ONLY)E8ENGLISHCD OR CD+G OPERATIONPress the PROGRAM button, PROG SET :00 XXXXHere " " stands for the total number of tracks, and it is blinking on the display.!!!!BLUETOOTH OPERATIONDuring playing, press the NEXT or PREVIOUS button to skip to the track desired, press PLAY/PAUSE button to pause, press again to resume. Press PAIR button to disconnect the current connection, press again to reconnect again.NOTE: The unit will automatically connect with the device connected before after the Bluetooth function is switched on.successful connection. Press the CDG/BT Button to switch to Bluetooth mode, "BLUE TOOTH" will appear on display and the PAIR indicator flashes, after a few seconds, a sound will be heard, now it is in pairing and searching mode, start the Bluetooth function on the external device, the pairing name "Singing Machine" will appear, select it and make pairing, the unit will send a piece of sound, the "PAIR" indicator stop blinking after
MASTER VOLUMEYour Singing Machine is designed to connect your favorite Digital Music device (e.g. iPod/MP3 player, etc.)You can connect your device by using an appropriate cable (Rotate to the MASTER VOLUMEcontrol to obtain the desired soundlevel.DWarning - To avoid the over-burst amplified volume outputor possible over-tuned soundcrack, you are recommended toadjust the Digital Music devicevolume to one third or lower atthe beginning.3.5mm audio cable not included).switched ON once the audio cable isplugged.Note: Monitor will be turned off when theaudio cable is plugged.AUDIO OUTPUT/ HEADPHONE JACKREAR VIEW OFSINGING MACHINEYOUR DIGITAL PLAYER OR MP3 PLAYERLINE IN OPERATIONLINE IN function can always be LINE INLINE INENGLISHE9
TROUBLE SHOOTING GUIDEIf you have followed the instructions and are having difficulty operating the unit, locate thePROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column tolocate and remedy the problem.SOLUTIONInsert the power plug into the ACoutlet.Turn up the volume.Turn up the volume at TV/PAsystem.Turn on the power at TV/PAsystem.Follow directions ‘AudioConnection’page.PROBLEMNo power whenPOWER is on.No sound.POSSIBLE CAUSENo power plug connection attheAC outlet.Volume control is set tominimum.Volume control on TV set/PAsystem is set to minimum.TV set/PA system power isOFF.connected.Check the outlet with a workinglamp or other electrical appliance.No power when pluggedin.The AC outlet may not havepower.Insert disc correctly.Wipe clean with soft cloth.Use a new disc.Use a new disc.Only use discs bearing standardlogo.Disc is inserted upside down.Disc is dirty.Disc is scratched.Disc is warped.A nonstandard disc isinserted.Moisture has formed insidethe CD deck.CD PLAYERCdisplayed.isannot work normally or“”Wait about 20 to 30 minutes to let itdry out.Singing Machine needs to bereset.Disconnect the machine frompower source for 30 seconds.Lens is dirty. Use a CD lens cleaner.IN jack.Audio cable has not beenjack.ENGLISHremoved from the LINE IN Removed Audio cable from LINE AUDIO OUT jacks notE10
The Bluetooth devicecan not be pairedPress the (stop) /PAIR button to restart Bluetooth pairing modeActivate the Bluetooth on your deviceBluetooth on your devicenot activatedBluetooth function is cut off
33.5ENGLISH4MONITOR SECTION5.5” BLACK AND WHITE MONITORNTSC SYSTEM220 LINE RESOLUTION9.1 x 8.8 x 13.6 inches / 23.1 x 22.4 x 34.5 cm7.9 lbs / 3.6 kgsDIMENSIONS (W x D x H)3.5mm stereo headphone jackLINE IN SECTIONDC 5.8V 2AE12

Navigation menu