Junlan Electronic STVG569BT Bluetooth Karaoke Player User Manual 559WIBESF120516
Shenzhen Junlan Electronic Ltd Bluetooth Karaoke Player 559WIBESF120516
User manual
STVG569BT ENGLISH WARNINGS Warnings: ! This CD player employs a laser light beam. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. ! The use of controls, adjustments, or procedures other than those specified herein might result in hazardous radiation exposure. ! The apparatus shall be used in an open area. CAUTION This compact disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear panel. WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The CAUTION marking is located on the rear panel. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product's case. This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product. CAUTION! Invisible laser radiation when open and inter locks defeated. Avoid exposure to beam. DRIPPING WARNING The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. FCC IMPORTANT Since CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. VENTILATION WARNING The normal ventilation of the product shall not be impeded for intended use. This device complies with part 15 of the FCC rules, operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. SAFETY CERTIFICATION This device is made and tested to meet safety standards of the FCC, requirements and compliance with safety performance of the U.S. Department of Health and Human Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J. CAN ICES-3(B)/NMB-3(B) Main plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the main plug should be disconnected from the main socket outlet completely. Class II equipment symbol This symbol indicates that the unit has a double insulation system. E1 NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television (which can be determined by turning the equipment off), the user is encouraged to try to correct the interference by one or more of the following measures: ! Reorient or relocate the receiving antenna. ! Increase the separation between the equipment and receiver. ! Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ! Consult the dealer or an experienced radio / TV technician for help. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. E2 ENGLISH WARNINGS /PAIR CDG/ BT PAIR (STOP)/PAIR 20. MIC 2 Jack 21. MIC 1 Jack 22. LINE IN Jack 23. DC Jack (DC 5.8V) 24. AUX OUTJack (L) 25. AUX OUTJack (R) 26. VIDEO OUTJack 20 21 23 24 25 26 22 DISPLAY CDG TRK 8/8 00:16:04 PLAYING TIME REPEAT MODE - REPEAT ONE - REPEAT ALL - NO REPEAT FUNCTION PLAY/PAUSE/STOP INDICATOR - PLAYING MODE - PAUSE MODE - STOP MODE PLAYING TRACK NUMBER AND TOTAL TRACK NUMBER PLAYING DISC MODE CD - CD PLAYING CDG - CDG PLAYING E4 ENGLISH REA R VIEW 5.8 AUDIO OUTPUT AUDIO OUTPUT AUDIO INPUT AUDIO INPUT ENGLISH CD OR CD+G OPERATION This unit is designed to play CDs and CD+Gs bearing the identification logo respectively. If the disc does not conform to the standard, it may not play properly. TURNING POWER ON/OFF ! To turn on the unit, press the ON/OFF button, the ON/OFF LED Indicator will light up. ! To turn it off, press the ON/OFF button again, the ON/OFF LED Indicator will turn off. LOADING A DISC ! Open the CD door, place a CD or CD+G disc in the compartment with the printed side facing upward and the shiny side facing down. Press the CDG/BT button to switch to CD mode. ! Gently close the CD door. The monitor will display total number of tracks. (If no disc is loaded, it will display “NO DISC”.) Note: - Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit. - Only place one disc on the disc tray at a time. (Refer to the Trouble Shooting Guide if a disc is loaded but the total tracks do not appear.) PLAY/PAUSE ! Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level. ! To start playing, press the PLAY/PAUSE button. The first track and total number of tracks will be displayed on the monitor. ! To temporarily stop playing, press the PLAY/PAUSE button. The PAUSE indicator will be displayed. ! To resume play, press this button again. Note: - Pressing pause repeatedly when a CD+G is playing may cause distorted lyrics on your TV screen. Any distortion will remain on the TV screen until it is refreshed either during an instrumental break or the song is stopped and/or the song is started from the beginning. STOP If the STOP button is pressed in the course of playing, the disc will cease to play. (The STOP indicator will be shown on the window.) MASTER VOLUME Rotate to the MASTER VOLUME control to obtain the desired sound level. Note: The MIC Volume must be adjusted simultaneously with the master volume level. SKIP (For both CD and CDG discs) ! During STOP mode, you can skip forward or back to your desired track number by pressing the SKIP buttons( - SKIP - ). ! To resume playing the selected song, press PLAY/PAUSE button. SEARCH (For audio CD disc only) When playing any audio CD, press and hold the SKIP button ( -SKIP). The CD will search at high speed in the forward or backward direction. Normal play will continue when you release the button. REPEAT 1 ) indicator will lght up. A ) indicator will light up. ! To repeat all tracks, press the REPEAT button twice. The REPEAT ALL ( Press the PLAY/PAUSE button to begin. ! To clear the REPEAT function, press the REPEAT button again. The NO REPEAT ( ) indicator will turn on. ! To repeat the track currently playing, press the REPEAT button once. The REPEAT ONE ( E7 PROGRAM Use this button to program and play back songs in a preselected order. Step 1: Programming should be done in the stop mode only. Press the PROGRAM button, PROG SET 00 :XX Here " XX " stands for the total number of tracks, and it is blinking on the display. Step 2: Press the SKIP buttons ( - SKIP ) to select a desired track. Step 3: Press PROGRAM button to confirm entry. You can repeat the same steps up to a maximum of 24 tracks. Step 4: Press PLAY button when you have completed programming and you are ready to start singing. Press the STOP button twice to clear all the programmed entries. MONITOR ON/OFF Press MONITOR ON/OFF button to ON if you want to display a CDG lyrics on the Singing Machine’s monitor. KARAOKE FUNCTIONS Sing along with the music by plugging in the provided microphone into either one of the microphone jacks on the unit. D Warning - Tapping or dropping the microphone while it is on can permanently damage your microphone. Resist the urge to swing the microphone around by the cord! MIC VOLUME Adjust the MIC VOLUME control to a desired level and obtain the best performance. D Warning - To avoid Microphone feedback please avoid being too close to the speaker. ECHO Adjust the ECHO control to enhance your voice for a concert hall effect. BALANCE Adjust the BALANCE control to separate the prerecorded singer’s voice and music when using a multiplex karaoke disc. AUTO VOICE CONTROL (MULTIPLEX DISCS ONLY) AUTO VOICE CONTROL can be activated by rotating the Auto Voice Control knob to right. The vocals on the multiplex recording will be muted when using the microphone. When the microphone is not in use the pre-recorded vocals will resume on a multiplex disc. BLUETOOTH OPERATION Press the CDG/BT Button to switch to Bluetooth mode, "BLUE TOOTH" will appear on display and the PAIR indicator flashes, after a few seconds, a sound will be heard, now it is in pairing and searching mode, start the Bluetooth function on the external device, the pairing name "Singing Machine" will appear, select it and make pairing, the unit will send a piece of sound, the "PAIR" indicator stop blinking after successful connection. During playing, press the NEXT or PREVIOUS button to skip to the track desired, press PLAY/PAUSE button to pause, press again to resume. Press PAIR button to disconnect the current connection, press again to reconnect again. NOTE: The unit will automatically connect with the device connected before after the Bluetooth function is switched on. E8 ENGLISH CD OR CD+G OPERATION ENGLISH LINE IN OPERATION Your Singing Machine is designed to connect your favorite Digital Music device (e.g. iPod/MP3 player, etc.) You can connect your device by using an appropriate cable ( 3.5mm audio cable not included). LINE IN function can always be switched ON once the audio cable is plugged. Note: Monitor will be turned off when the audio cable is plugged. YOUR DIGITAL PLAYER OR MP3 PLAYER MASTER VOLUME Rotate to the MASTER VOLUME control to obtain the desired sound level. D Warning - To avoid the overburst amplified volume output or possible over-tuned sound crack, you are recommended to adjust the Digital Music device volume to one third or lower at the beginning. REAR VIEW OF SINGING MACHINE LINE IN LINE IN E9 AUDIO OUTPUT / HEADPHONE JACK If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to locate and remedy the problem. PROBLEM No power when POWER is on. POSSIBLE CAUSE SOLUTION No power plug connection at Insert the power plug into the AC outlet. the AC outlet. No power when plugged The AC outlet may not have Check the outlet with a working power. lamp or other electrical appliance. in. Volume control is set to Turn up the volume. minimum. Audio cable has not been Removed Audio cable from LINE removed from the LINE IN IN jack. jack. No sound. Volume control on TV set/PA Turn up the volume at TV/PA system. system is set to minimum. TV set/PA system power is Turn on the power at TV/PA system. OFF. AUDIO OUT jacks connected. not F o l l o w d i r e c t i o n s ‘ A u d i o Connection’ page. Disc is inserted upside down. Insert disc correctly. Disc is dirty. Wipe clean with soft cloth. Disc is scratched. Use a new disc. Use a new disc. Disc is warped. CD PLAYER Cannot work normally or A nonstandard disc is Only use discs bearing standard “ ” is displayed. logo. inserted. Lens is dirty. Use a CD lens cleaner. Moisture has formed inside Wait about 20 to 30 minutes to let it the CD deck. dry out. Singing Machine needs to be Disconnect the machine from reset. power source for 30 seconds. E10 ENGLISH TROUBLE SHOOTING GUIDE The Bluetooth device can not be paired Bluetooth on your device not activated Activate the Bluetooth on your device Bluetooth function is cut off Press the (stop) /PAIR button to restart Bluetooth pairing mode ENGLISH 3.5 MONITOR SECTION LINE IN SECTION 5.5” BLACK AND WHITE MONITOR NTSC SYSTEM 220 LINE RESOLUTION 3.5mm stereo headphone jack DC 5.8V DIMENSIONS (W x D x H) 2A 9.1 x 8.8 x 13.6 inches / 23.1 x 22.4 x 34.5 cm 7.9 lbs / 3.6 kgs E12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Create Date : 2012:05:16 18:03:34+08:00 Creator Tool : CorelDRAW Modify Date : 2016:04:20 17:36:49+08:00 Metadata Date : 2016:04:20 17:36:49+08:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Title : 559WIBESF120516.cdr Document ID : uuid:dc5b1e94-aaec-4012-ac93-9bc9ddb48be7 Instance ID : uuid:37d6ca21-3c94-4282-95ab-cfd06ab2b724 Has XFA : No Page Count : 14 Creator : CorelDRAWEXIF Metadata provided by EXIF.tools