Junlan Electronic TSB501M BT TOWER SPEAKER User Manual
Shenzhen Junlan Electronic Ltd BT TOWER SPEAKER
User Manual
MODEL:927032
BLUTHTOOTH ENTERTAINMENT SPEAKER SYSTEM
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE
Safety Information
Overview of controls
Making the connections
General operation
FM/AM operation
USB operation
Care and Maintenance
Troubleshooting
Technical Specications
Contents
Time setting
Alarm setting
Snooze
Sleep timer
Dimmer
BT operation
Paring and connecting
During playing
CD/MP3 operation
During playing
During playing
2
Functions and Controls
User Instructions
Programme.procedure
1
4
3
5
Assembling the unit
Assembling the unit
Assembling the unit
FCC statement
Limited Warranty
12
13
Assembling the unit on wall
Assembling the unit on wall
6
7
8
12
14
16
9
10
10
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
Important safety information
4
3
5
6
7
8
15
11
11
Important – Please read these instructions fully before installation
Safety Information
This symbol means that this unit is double
insulated. An earth connection is not required.
CAUTION : CLASS 1 LASER PRODUCT
Use of contents or adjustments of performance of
procedures other than those specied Herein may result
in hazardous radiation exposure.
LASER SAFETY
This unit employs a laser, only qualied service
personnel should attempt repair.
DANGER: Invisible laser radiation when open and
interlock failed or defeated avoid direct exposure to beam.
CAUTION: hazardous laser radiation when open and
intelock defeated.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE ANY COVER. NO
USER-SERVICEABLE PARTS INSIDE, REFER
ANY SERVICING TO QUALIFIED SERVICE
PERSONNEL.
• Please read this owner’s guide
• Please take the time to follow the instructions in this
owner’s guide carefully. It will help you set up and
operate your system properly and enjoy all of its
advanced features.
• Please save this owner’s guide for future reference.
• The product label is located on the back of the
product.
• This product must be used indoors. It is neither
designed nor tested for use outdoors, in recreation
vehicles, or on boats.
• Heed all warnings - on the product and in the
owner’s guide.
• Do not use this apparatus near water or moisture.
Do not use this product near a bathtub, washbowl,
kitchen sink, and laundry tub, in a wet basement,
near a swimming pool, or anywhere else that water
or moisture is present.
• Only use attachments/accessories specied by the
manufacturer.
• Unplug this apparatus during lightning storms or
when unused for long periods of time - to prevent
damage to this product.
• Refer all servicing to qualied service personnel
• Servicing is required when the apparatus has
been damaged in any way: such as liquid has been
spilled or objects have fallen into the apparatus; the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped -
Do not attempt to service this product yourself.
Opening or removing covers may expose you to
dangerous voltages or other hazards.
• To prevent risk of re or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.
• Use proper power sources - Plug the product into a
proper power source, as described in the operating
instructions or as marked on the product.
• The mains plug is used as the disconnect device, the
disconnect device shall remain readily accessible
CAUTION
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
• Do not touch the playback side of the disc.
• Do not attach paper or tape to disc.
• Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the centre
outwards with a soft cloth. Always keep the disc
clean.
• If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth
and nish with a dry cloth.
• Do not use any type of solvent such as thinner,
benzene, commercially available cleaners or
antistatic spray for vinyl. It may damage the disc.
• Do not store discs in a place subject to direct sunlight
or near heat source.
• Do not store discs in a place subject to moisture and
dust such as a bathroom or near a humidier.
• Store discs vertically in a case, stacking or placing
object on discs outside or their case may cause
warping.
Disc handling
2
3
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7.Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including ampli¿ers) that
produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. When the
provided plug does not ¿W into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories
VSHFL¿HGE\WKHPDQXIDFWXUHr.
12. Use only with a cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13.Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to TXDOL¿HG service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
Additional Warnings
The apparatus shall not be exposed to
dripping or splashing and that no objects
¿lled with liquids, such as vases, shall be
placed on apparatus.
Main plug is used as disconnect device
and it should remain readily operable
during intended use. In order to disconnect
the apparatus from the main completely,
the main plug should be disconnected from
the main socket outlet completely.
Battery shall not be exposed to excessive
KHDWVXFKDVVXQVKLQH¿UHRUWKHOLNH
Caution marking is located at the rear or
bottom of the apparatus.
The marking information is located at the
rear or bottom of apparatus.
IMPORTANT SAFETY INSTRUCTION
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
ASSEMBLING THE UNIT
step one
---insert the pipe from the bottom of the stand and fix it with screws supplied
step one
4
ASSEMBLING THE UNIT
step two
---Insert the wire
step two
into the steel pipe
until out of the bottom of stand
5
ASSEMBLING THE UNIT
step four
to the bottom of the stand
---pull wire straight
---use rubber brackets and screws to fix the wire
step four
step three
step three
---insert the upper part of the unit into the steel pipe
---then use screw to fix two parts
---assembling is done
6
ASSEMBLING THE UNIT ON WALL
Step one: drilling holes according to the size in Fig 1
Step two: after drilling holes,insert the wall plug,
fix the metal bracket on the wall with screw.
7
ASSEMBLING THE UNIT ON WALL
Step three: then fixing the bracket at the back of the unit.
Step four: after fixing the bracket at the back of the unit, hang the unit on the wall.
8
Accessories included
Please familiarize yourself with the parts and accessories listed below
Functions & Controls
● 1 x Instruction manual
● 1 x RCA cable
●1 x Remote control (with battery)
Overview of controls
542 31
6
542 31
14 15 16
● Wall mount brackets and scews
● 1 x AUX IN cable with 3.5mm stereo plaug
- VOLUME + ALAR M SO UR CE S NO OZ E TIME- AM/FM
TUN- TUN+
TIME+ PAIR
AUX IN 1 USB PLAY ER
7 8 9 10 11
19 20 21
1. Power standby
2. Volume down
3. Volume up
4. Alarm
5. Source display
6. Snooze
7.
8.
9. AM/FM Radio
10. Play/ pause /Pair button/Time set
11. Disc eject
( [] Tune down/ previous
[ ] / time -
(
[ ]
Tune up/ next / time +
[ ]
EJECT
9
27
12
29
30
28
21
22
23
24
25
26
13
14
15
16
17
18
19
20
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
12
TIME
24. Dimmer
25. Sleep
26. Snooze
27. Disc eject
28. CD source
Bluetooth
29. AUX2 source button
30.
31.
Radio preset recall
32. Memory
33.
34. [ ]
Tune up/ next
Time
35.
Stop
36.
37.
Time + button
38.
Volume up
39. Alarm
40.
Bluetooth pairing
41.
Random
42.
Repeat
43.
Bass up
44. Bass down
45.
/ time +
AUX1 source
Radio preset recall
12.
13. Mute
14. AM/FM
15. USB source
16. Program
17.
18.
19.
20.
21. AM/FM scan
22. ST/MO
( [] Tune down/ previous
[ ]
Play/ pause
Volume down
Time -
[Stereo / mono]
23.
EQ
Power standby
10
Overview of controls
542 31
User Instructions
Making the connections
General operation
Time setting
AUX AUDIO CONNECTION
Using a 3.5mm audio cable ( supplied), it is
possible to connect an external audio device
EG:- MP3 player to the unit.
NOTE: This function requires the AUDIO
CONNECTION to be made to an external amplier.
This will NOT work connected to a TV input.
1. Connect a 3.5mm cable into the AUX IN 1 input
socket on the control panel.
2. Connect the other end to your audio devices
headphone output or Line-out.
MP3 PLAYER
3. Press the SOURCE
4. Press PLAY on the external audio source EG:-
MP3 player.
NOTE: The audio output level is effected by the
volume on the source EG: MP3 player so make
sure that is set to about 70-80% (not too loud to
avoid distortion).
5. Adjust the VOLUME control on the amplier to
set the main volume level.
AUX IN 1
button until AUX IN 1
appears on the display.
Using a RCA audio cable ( supplied), it is
possible to connect an external device
EG:- DVD player / VCR to the unit.
AUX IN 2
L R
DVD Player
Red
Red White
Audio Output
Jacks on the
DVD / VCR / DVR
the unit.
1.Connect the AV cable to the Audio Output Jacks
(White Jack=L, Red Jack=R) on DVD player
and Audio Input Jacks on the rear of
DVD player/VCR/DVR and etc.
NOTE:
2.Press button until AUX 2 appears on the
SOURCE
A TV can also be connected to watch video files in
the
display.
3. Activate the external device.
2. Hold TIME button on the remote control to start
3. Press TIME +/- button to set 12h or 24h.
Then press TIME button to confirm.
Alarm setting
1. Place the unit into Standby mode.
2. Hold button on the remote control to
ALARM
activate the alarm setting.
3. Press and button to adjust the hour
TIME+ TIME-
and the minute. Then press button to confirm.
ALARM
1. Place the unit into Standby mode.
4. Press or button to select the alarm
ALARM
When the alarm rings, press
Snooze Snooze Snooze Snooze Snooze Snooze Snooze Snooze button to turn Snooze
Snooze
off the ring and 9 minutes later, the alarm will ring
again.
Sleep timer
SLEEP
ranges from 10-90 minutes.
During playback, press button repeatedly
to set the playback duration and after the time
reaches, the unit will automatically turn itself off.
The duration
Dimmer
DIMMER
Press button to adjust the display
brightness.
screen and the hour digit will flash.
the time setting.Then "12Hr"or "24Hr" will appear
on
4. PressTIME +/- to set hour and press
5. Press TIME +/- to set minute digit.Press "TIME"
to confirm.
"TIME" to
confirmand minute digit will flash..
rings as FM ("F")or buzzer("b"). Then press
button to confirm.
5. Press "TIME +/-" to set alarm volume level.
Snooze Snooze Snooze
11
TIME+ TIME-
1. Press until radio FM or AM appears
on the display.
2. Press the button to switch between AM AM/FM
and FM.
3.
stations. When a station is found, the unit will
FM/AM operation
Hold and button search for the
TUNE+ TUNE-
stop and start playing.
4. Press button, then PX will appear on the
MEM
display. Press or button to select the
M+ M-
place you want the station to be stored. Then
press button again to store.
MEM
5. Press or button to listen to the preset
M+ M-
stations.
NOTE:
-The radio will automatically receive FM radio
broadcasts in stereo (when available). Alternatively,
is low, and background noise level is high.
BT operation
- Press button on the remote control to
SCAN
search and store the stations automatically.
you can manually set the radio to mono mode by
pressing ST/MO button on remote control. the signal
strength
1. Press button until bt appears on the display
after a beep sound, the unit will start to search
for the last conncted device if it is found. If it is
2. Activate the Bluetooth connection on the external
NOTE:
BT
device.
4. bt on the display will be solid light,
Enter 0000 when asked for a password
during connecting.
not found,the unit will search for other devices.
5. Hold button on the control panel or press
PAIR
PAIR
button on the remote control to disconnect
Paring and Connecting
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause the playback, press again
to resume the playback.
NOTE: buttons may not work with all
(
the Bluetooth sources.
2. Load the disc. Then the playback will start.
3. Press button to eject the disc when finished
CD/MP3 disc operation
1. Press button until CD appears
on the display.
3. When appears on the list,
choose to pair with it.
"SOUNDLOGIC DES"
when connection
is estalished.
CD
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause the playback, press again
to resume the playback.
-Press button to stop the playback
-Press button to turn on or enter or exit the
RAN
random playing.
-Press button to perform the repeat playback.
REP
-Press button to play the contents in the pre-
PROG
selected order.
1.During CD/MP3 playing, press STOP, then press
PROG, “PRO ” will display on screen.
2.Press PREV/NEXT to select the track needed to
programme, at the same time, the selected
tracks
display on screen, the press PROG to confirm.
Note: If do not press PREV/NEXT to select track
at this time, programming function will
the character
disappear.
automatically
exit after 20 seconds,
Programme procedure
3.If continuing to add tracks, repeat number 2
operation.
USB operation
1. Press the button until USB appears
on the display.
2. Insert the USB device into the USB port. Then
it will start playing.
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause playing, press again
to resume the play.
-Press button to stop the play, Press again
to resume.
4.To complete programming, press PLAY to start
playing the programmed tracks. Press STOP twice to
cancel programming.
2.Load the disc,it will play automatically.
3. Press button to eject disc when finished.
USB
AM/FM
12
Care & Maintenance
Important: Always unplug the appliance from the power socket during cleaning and
maintenance.
• Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
• Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it
may damage the appliance.
Problem Reason(s) Solution(s)
No Power ● Power cable not connected to wall socket
● Standby mode active
● Make sure the plug is connected
● Press the STANDBY button to wake the unit
Disc will not play ● Disc not inserted correctly
● Defective disc
● Moisture on disc
● Non standard disc
● Lens is dirty
● The unit requires resetting
● Remove and re-load the disc with the label
facing upwards
● Try another disc
● Wipe, clean and try again
● Use a disc bearing the standard logo
● Use a CD lens cleaner
● Disconnect from the mains power for 30
seconds, and re-connect and try again.
No sound ● Volume control set to minimum
● Defective disc
● Audio connections not correct
● Increase the volume level
● Try another disc
● Check the Audio connections to the TV or AMP
● Defective disc ● Try another disc
Remote not working ● Replace the battery with two new 2 x AAA batteries .
Troubleshooting
Disc playing error
● Battery is exhausted
9
13
Technical Specications
General
Power source
Audio output
BT working range
AUX input Ø 3.5mm stereo headphone jack
USB File system
USB max capacity
FAT 16 / FAT 32
32GB
AC 120V~60Hz
FM coverage 887.5 - 108 MHz
30W
AM coverage 520 - 1710 KHz
14
32 feet
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
15
LIMITED WARRANTY
This manufacturer's product warranty extends to the original consumer purchaser
of the product. Neither the retailer nor any other company involved in the sale or
promotion of this product is a co-warrantor of this manufacturer warranty.
WARRANTY DURATION:
This product is warranted against defective meterials or workmanship. This warranty
is void if the product has been damaged by accident,in shipment, unreasonable use,
misuse, neglect,improper service, commercial use, repairs by unauthorized personnel
or other causes not arising out of the defects in material or workmanship. This warranty
does not cover the following which may be supplied with this product, including but
not limited to ;LCD Screens, glass parts,lenses,etc. This warranty is effective only if
the product is purchased and operated in USA, and does not extend to any unit
which have been used in violation of written instructions furnished by manufacturer
or to units have been altered or modified or, to damaged products products or parts
thereof which have had the serial number removed, altered, defaced or rendered
illegible.
This waaranty is in lieu of all warranties expressed or implied and no representative
WARRANTY DISCLAIMERS:
or person is authorized to assume for manufacturer any otehr liability in connection
with the sale of our products. There shall be no claims for defects or failure under
any theory or tort, contractor commercial law including but not limited to, neglience,
gross neglience, strict liability, breach of warranty and breach of contract.
During the above 90 day warranty period, a product with a defect will be repaired or
replaced with a reconditioned comparable model (at manufacturer's option). The
WARRANTY PERFORMANCE:
If service is required for this product, you should first contact Midwest Trading Group
repaired or replacement product will be in warranty for the balance of the 90 day
warranty period and an additional one-month period. No change will be applicable
for such repair or replacement.
NOTE:
Customer Service at info@mtradinggroup.com or by calling 1(866)851-4714,
Manufacturer can not assume responsibility for loss or damage during incoming
Monday to Friday 9am to 5pm CST.
SERVICE AND REPAIR:
problem you experienced, a copy of your sales receipt or other proof of purchase
shipment. As a recautionary measure, carefully package the product for shipment
and insure it with the carrier. Be sure to enclose the following details with the product:
your full name, return address and daytime phone number, a note describing the
to determine warranty status. C.O.D. shipments can not be accepted.
16