KAB Enterprise TR-010 Remote Control Transmitter User Manual RC 010 WDS
Kab Enterprise Co., Ltd. Remote Control Transmitter RC 010 WDS
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 953413 |
| Application ID | Q93+AXRvQ1hPXMy3VUTRXw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 146.59kB (1832377 bits) |
| Date Submitted | 2008-06-10 00:00:00 |
| Date Available | 2008-06-10 00:00:00 |
| Creation Date | 2008-06-06 08:31:21 |
| Producing Software | Adobe PDF library 8.00 |
| Document Lastmod | 2008-06-06 08:31:23 |
| Document Title | RC-010(WDS) |
| Document Creator | Adobe Illustrator CS3 |
| Document Author: | Atico |
NOTE: IMPORTANT INFORMATION REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. INSTALLATION: 1. Mount or hang the RECEIVER on the wall near a wall grounded electrical 120V 60Hz outlet which the power supply cord of the RECEIVER will plug in to. 2. Plug the cord of the device you wish to control remotely at the bottom of the RECEIVER. 3. The heat dissipation hole of the bottom must be stuck on the wall closely. 4. The device must be mounted in an attitude that the heat dissipation openings at the bottom enclosure shall be stuck on the wall closely and in a vertical position with the receptacle facing downward and with the receptacles at least 2 feet (610 mm) above the ground level not for water immersion. Operation: • Function A - Fading: 3 outlets turn light fading rotational by each outlet (turn off by function E) • Function B - Chasing: 3 outlets turn light ON/OFF rotational by every 2 outlets (turn off by function E) • Function C - Flashing: 3 outlets turn light Dancing ON/OFF by sec for flashing Chasing On/Off Event (turn off by function E) • Function D - Dancing: Cyclic repeat function Flashing Fading A to C (turn off by function E) • Function E - Switch: Turn 3 outlets power ON/OFF as regular remote Each receptacle is limited to 333W A14G0846 533299 2008
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.1-c036 46.277092, Fri Feb 23 2007 14:16:18 Format : application/pdf Subject : Creator : Atico Title : RC-010(WDS) Creator Tool : Adobe Illustrator CS3 Create Date : 2008:06:06 08:31:21+08:00 Modify Date : 2008:06:06 08:31:23+08:00 Metadata Date : 2008:06:06 08:31:23+08:00 Thumbnail Width : 224 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22485 bytes, use -b option to extract) Document ID : uuid:29B1308A353511DD9EDD949FADCEB3F2 Instance ID : uuid:8b5bc3de-9fce-46c1-a83a-26adf5371de6 Derived From Instance ID : uuid:29B13089353511DD9EDD949FADCEB3F2 Derived From Document ID : uuid:7AED2C5427DF11DD8C89AF6FDA8D8124 Source Modified : D:20070611010456 Company : Atico International N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 220.000008 Max Page Size H : 249.999986 Max Page Size Unit : Millimeters Font Name : ArialMT, TrebuchetMS-Bold, TrebuchetMS Font Family : Arial, Trebuchet MS, Trebuchet MS Font Face : Regular, Bold, Regular Font Type : TrueType, TrueType, TrueType Font Version : Version 2.90, Version 1.15, Version 1.15 Font Composite : False, False, False Font File Name : Arial, Trebuchet MS, Trebuchet MS Plate Names : Cyan, Magenta, Yellow, Black Swatch Group Name : Default Swatch Group Swatch Group Type : 0 Swatch Colorant Swatch Name : New Color Swatch 6, New Color Swatch 2, AutoCAD Color, AutoCAD Color 1 Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Mode : RGB, RGB, RGB, RGB Swatch Colorant Red : 0, 0, 0, 0 Swatch Colorant Green : 0, 0, 0, 0 Swatch Colorant Blue : 0, 0, 0, 0 Producer : Adobe PDF library 8.00 Headline : Page Count : 1 Container Version : 11 Creator Version : 13 For : tony, Bounding Box : 30 63 585 700 Author : Atico Image Height : 637 Image Width : 555 Image Size : 555x637 Megapixels : 0.354EXIF Metadata provided by EXIF.tools