KAONMEDIA CG2001-AN22CC Docsis cable modem User Manual

KAONMEDIA Co., Ltd. Docsis cable modem

User Manual

CG2001-AN22CCCG2001-AN22CCThis device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operaon.Cauon: Any changes or modificaons to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.
1 21 4 5 62WPS Long Press The associaon of the modem with a PC or other equipmentLED Status IndicaonLAN1~4 Off The LAN port is not connected.Flashing The LAN port is sending or receiving data.(Green : 1Gbps, Amber : 10/100Mbps)On The LAN port is connected.POWER Off The modem is powered off.On The modem is powered on.US Off The inializaon is not started, or has failed.Flashing The modem is upstream ranging.On The modem is upstream locked. DS Off The inializaon is not started, or has failed.Flashing The modem is scanning for downstream channel.On The modem is downstream locked.POWER Off The modem is powered off.On The modem is powered on.ETH-1~4 4 RJ45 Ethernet ports to connect your PC or home network devicesRESET Switch for factory resetRF DOCSIS Cable connectorPower ON/OFF Switch for power On/OffPower Connects the unit to DC 12V powerTabletAdaptorCoax jumper RCASCARTCOMPONENT output영상출력Power AdaptorCoax CableAdaptorCoax jumper RCASCARTaudio output음성출력HDMIAAA BATTERYLaptop2.0 Connecting and Installing Devices
AAA BATTERY3 43.0 Quick GuideInstrucon for Connecon Modem-PC1. Make sure the following.- Connect the coaxial cable ghtly to the cable outlet.- Your Cable Modem is powered ON. The power LED will be turned ON.- Your PC is turned ON and connected to Cable Modem using an Ethernet cable.- Aer Online LED is ON, Cable Modem becomes online.2. Configure your PC to obtain an IP address from a DHCP server.3. From your PC, start your web browser applicaon like Chrome, Internet Explorer, or etc.4. Type a valid URL such as “www.google.com” and <Enter>.The website should be open if connected correctly.Wi-Fi Connecon1. Open Wireless seng window in your Wi-Fi device or PCs.2. Search for the right “SSID”. The factory Default seng:- SSID: “CG2001_XXXXXX_G1” for 2.4GHz.- Note: XXXXXX is character that last 6 characters of Cable Modem MAC Address.WebUI Access Guide To access the configuraon web pages, you must do the following :1. From your PC, start your web browser applicaon like Chrome, Internet Explorer or etc.2. In the URL address field, enter IP address “192.168.0.1” and <ENTER>.3. The log-in window should popped-up aer the step 3 above. Then, log-in to the web configuraon menu with the following :- Enter “MSO” into the “User Name” field.- Enter “MSO” into the “password” field.4. The main menu will be popped-up like below and you can check or change the current sengsfrom appropriate menus.REARPowerDC 12V (1.5A)Front1 x WPS Button 9 x LED(Power, DS, US, Online, Wi-Fi, Eth1, Eth2, Eth3, Eth4)1 x Cable In1 x Reset Button1 x On/Off Button4 x GbE LAN PortsPackageReception Sensitivity Modem with Wi-FiUser Guide (Ukrainian, Russian and English) Ethernet Cable (CAT5/RJ45)Power SupplyWi-Fi Standards/Tx/RxRadio FrequencyAntenna Type Transmission RateMemoryMain ChipsetMax DOCSIS DS/US802.11 b/g/n, 2Tx2R802.11 a/n/ac, 3Tx3RFlash : 16MB SPI (NOR)RAM : 128MB DDR32.4 GHz_BCM432178 x 4 Channel BondingInternal Antennas (PCB Type)2.4GHz : 300Mbps (802.11n 2x2)BCM3383G (500 DMIPS Zephyr, 1600 DMIPS VIPER)1GHz Full Band Capture DOCSIS3.011b 11Mbps : -82dBm11g 54Mbps : -71dBm11n HT20: -69dBm (MCS7)11n HT40: -68dBm (MCS7) 2.4GHz 4.0 Specification

Navigation menu