KAPSCH TRAFFICCOM CANADA 801531 RFM-S Transmitter User Manual TTS Reader User Guide for testing RFM S

Download:
Mirror Download [FCC.gov]
Document ID	605689
Application ID	WcpZpXle8MLMOFsEg5QBfw==
Document Description	Field Testing Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.43kB (30371 bits)
Date Submitted	2005-11-24 00:00:00
Date Available	2005-11-24 00:00:00
Creation Date	2005-09-01 09:38:47
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-09-01 09:38:55
Document Title	TTS Reader User Guide for testing RFM-S
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	IT Deptartment

Page 1 of 2
Mark IV Industries Corp.
RFM-S Transmitter Field Testing Guide
With Warning Statements
Confidential
A. Set Up TTS Reader:
Serial Comms: RS-232 19200 baud No Parity etc. standard stuff. The cable (null modem)
runs out the top of the reader; connect to any DB-9 port on your host computer. Use a
Straight through cable (male-female) if you need to extend the length.
B. Set up TTS with RFM-S Transmitter:
The RFM-S Transmitter must be inserted in Slot #1 (the left most) of the RF Rack.
C. List of Commands: (power on default)
IAGTEST Help Menu - NOT FOR PRODUCTION USE
PT <2-28 hex #>
- Program Tag, MASK data must match
RT
- Read Tag
IP
- Initialize Tag (FP ff's)
FP <2-28 hex #>
- Factory Program Tag, MSb must be 1
LP <2-28 hex #>
- Lock Program Tag, MSb must be 1
TP <6 hex #>
- Trim Program Tag, MSB (FF), IDLE(XX), ACTIVE(XX)
(with VERIFY ON, FP is performed with TP data)
TL
- Lock Trim Values in Tag
IC [<#>]
- Iteration Count, # of triggers per RT/PT
PW [<#>] us
- Pulse Width, either 20, 33 or 40 us
REPEAT [<#>]
- Repeat Count, repeat PT/RT/FP/TP # times - ESC to stop
DELAY [<#>|OFF] - Repeat Delay, repeat cycle delay, OFF for no screen updates
DETAIL [ON |OFF] - Repeat Detail ON/OFF, show full data during repeat cycles
INC [ON |OFF]
- Repeat Increment ON/OFF, increment last 4 bytes during PT
STAT [ON |OFF] - Repeat Statistics ON/OFF, displays on last cycle
VERIFY [ON |OFF] - IP/FP/LP/TP Verify ON/OFF (PT always verifies)
PD [<#>]
- Program Delay. TXDATA delay between TRIGGER and
IP/FP/LP/TP data (NOT header): # us = ~ PD x 2.4 + 60
ex. 250 (default) = ~ 660 us (nominal)
CONFIG
- Return Configuration Summary
The above list can be obtained by typing ?.
© MARK IV INDUSTRIES Corp.
EXCEPT AS MAY BE OTHERW ISE PROVIDED BY CONTRACT, THESE DRAW INGS AND SPECIFICATIONS CONTAIN PROPRIETARY INFORMATION
AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE TRANSMITTED OR
REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF APPARATUS W ITHOUT PRIOR W RITTEN PERMISSION.
Page 2 of 2
D. Procedure to test and activate RFM-S:
In idle mode the reader generates NO RF. (RFM-S transmitter light off).
To turn on the RFM-S transmitter do the following:
1) Set the iteration count to a large number ( IC 1000 )
2) Issue a read transponder command ( RT )
The iteration count is the number of 20 microsecond trigger pulses the reader will issue
for every RT command.
for ic=1000 the reader will transmit for about 6-7 seconds.
for ic=2000 the time is around 13 seconds.
Max is 32767
Ignore all other commands.
E. Example:
ic 1000
IC=1000
//user input
//reader confirms
rt
READ ERROR
//user input
//after 1000 trigger pulses (about 6 secs later) reader
//responds with "READ ERROR" since (we assume) no transponder
//has been read.
(The iteration count is persistent. It remains the same unless changed or the reader is reset).
F. Warning Statement:
This device complies with Part 90 of the FCC Rules. Modifications not expressly
approved by the manufacturer may invalidate the user’s authority to operate the equipment
© MARK IV INDUSTRIES Corp.
EXCEPT AS MAY BE OTHERW ISE PROVIDED BY CONTRACT, THESE DRAW INGS AND SPECIFICATIONS CONTAIN PROPRIETARY INFORMATION
AND ARE THE PROPERTY OF MARK IV INDUSTRIES LTD. AND ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE TRANSMITTED OR
REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF APPARATUS W ITHOUT PRIOR W RITTEN PERMISSION.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f5187b70-d3a1-4514-a062-28acc5fa6323
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : Mark IV Industries
Source Modified                 : D:20050901132656
Headline                        : 
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2005:09:01 09:38:55-04:00
Create Date                     : 2005:09:01 09:38:47-04:00
Metadata Date                   : 2005:09:01 09:38:55-04:00
Document ID                     : uuid:ce02af1a-3d9a-4650-8510-9a4289b24c27
Version ID                      : 7
Format                          : application/pdf
Title                           : TTS Reader User Guide for testing RFM-S
Creator                         : IT Deptartment
Subject                         : 
Tagged PDF                      : Yes
Author                          : IT Deptartment

EXIF Metadata provided by EXIF.tools