KAPSCH TRAFFICCOM CANADA 802001 G4P Transponder User Manual FPT Interior Transponder Mounting Instructions

Download:
Mirror Download [FCC.gov]
Document ID	1069158
Application ID	FVmsqLwvhV720MmJl6J65g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.46kB (105728 bits)
Date Submitted	2009-02-17 00:00:00
Date Available	2009-02-19 00:00:00
Creation Date	2008-11-21 15:15:39
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-11-21 15:15:49
Document Title	FPT Interior Transponder Mounting Instructions
Document Creator	Acrobat PDFMaker 7.0 for Word
Document Author:	John Wolkowski

MARK IV Industries Corp
®
Short Range Vehicle-to-Roadside Communications Equipment for Automatic Vehicle Identification
G4P Transponder Mounting Instructions
for car interior on windshield
For proper operation, make sure the transponder is mounted as follows:
Fig.-1 Transponder Front Face
1. Identify the front face of the transponder. It displays your agency label and
two upward-pointing arrows. (Fig.-1) This side faces the driver with the arrows pointing toward the roof of your vehicle.
ARROWS POINT UP
2. Identify the position in your vehicle in which the transponder will be mounted.
The preferred location is between the exposed edge of the windshield (roofline) and the rear view mirror post—as long as the clearances in Fig.-2 can
be maintained. If there is insufficient room, the alternate location shown in
Fig.-3 must be used.
3. Having determined the mounting position in your vehicle, clean the inside
surface of that section of the windshield if necessary. Now carefully remove
the protective backing from the Dual LockTM mounting strips on the rear of the transponder as shown in Fig. 4 and
firmly press the rear of the transponder against the glass. Maintain the pressure for about 15 seconds to achieve a
good bond
Fig.-2 Preferred Mounting Location
Fig.-3 Alternate Mounting Location
Fig.-4 Transponder Rear Face
The transponder may be removed by lifting any one corner with sufficient pressure to separate the Dual LockTM strips.
Do not remove the Dual LockTM from the windshield and reuse it; obtain new strips from your service center if necessary.
This equipment must be installed to provide a separation distance of at least 20 cm from all nearby persons and must
not be co-located or operating in conjunction with any other antenna or transmitter.
Rear view mirror
Transponder
Sh e e t 1 o f 1
802001-001.doc
Nov 14, 2008
© MARK IV INDUSTRIES Corp
EXCEPT AS MAY BE OTHERW ISE PROVIDED BY CONTRACT, THESE DRAW INGS AND SPECIFICATIONS CONTAIN PROPRIETARY INFORMATION
AND ARE THE PROPERTY OF MARK IV INDUSTRIES CORP AND ARE ISSUED IN STRICT CONFIDENCE AND SHALL NOT BE TRANSMITTED OR
REPRODUCED OR COPIED OR USED AS THE BASIS FOR MANUFACTURE OR SALE OF APPARATUS W ITHOUT PRIOR W RITTEN PERMISSION.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Company                         : MARK IV Ind., F-P Electronics
Comments                        : Revised by RJ Middlemiss June 1998
Source Modified                 : D:20081113193721
Create Date                     : 2008:11:21 15:15:39-05:00
Creator Tool                    : Acrobat PDFMaker 7.0 for Word
Modify Date                     : 2008:11:21 15:15:49-05:00
Metadata Date                   : 2008:11:21 15:15:49-05:00
Document ID                     : uuid:74fc55e0-e4f2-486c-bef3-27a1536216c9
Instance ID                     : uuid:701457c7-7c8c-4b29-b88d-a087a5a45a7a
Version ID                      : 4
Format                          : application/pdf
Title                           : FPT Interior Transponder Mounting Instructions
Creator                         : John Wolkowski
Description                     : for car interior on windshield
Subject                         : 
Headline                        : for car interior on windshield
Page Count                      : 1
Page Layout                     : OneColumn
Language                        : EN-US
Author                          : John Wolkowski

EXIF Metadata provided by EXIF.tools