KBX GROUP QSPR-410BT Bluetooth Speaker User Manual
KBX GROUP Bluetooth Speaker Users Manual
Users Manual
User Manual Morph mobility.com 1. Description of functions: 1.1 Type: Mini portable battery-powered Bluetooth speaker. 1.2 Audio input methods: Bluetooth (V 3.0) and 3.5mm audio 1.3 Power supply mode: Built-in 3.7V 1000mAh Li-polymer battery charged by input socket. using micro USB cable. 1.4 Speaker driver unit: 4 Ω, 3 Watt, 1.5 inch circumference, 2 speaker drivers. 1.5 Audio source: Any device with a compatible 3.5mm audio out put socket or Bluetooth, incl. notebooks, Tablets, iPad, iPhone, iPod, Smartphones, and many other devices (see Diagram 2 below for input port location). 2. Button function (see Diagram 1 below) The speaker ofers volume, song change, and play/pause control. 2.1 ON/OFF & Play/Pause: A. Long press and hold the button to start until blue LED lights up and the speaker says “power on” or turn of until the speaker says “power of”). B. When playing music, quickly press the button to pause or play music. C. Under Bluetooth mode, when a phone call is coming, it will sound a ringtone , press the button for hands-free answering, press it again to hang up 2.2 VOL-/FWD: To decrease volume press the button and hold, to repeat last song press it quickly. 2.3 VOL+/NEXT: To increase volume press the button and hold, to go to next song press it quickly. 3. Bluetooth Pairing To pair a new device, long press and hold the ON/OFF button till the speaker says “power on”. Then, open your Bluetooth device and search the speaker, ind its correct name to pair, it will say “pairing completed” once done. Morph If the speaker had paired with your device before, long press and hold the ON/OFF DIAGRAM 1 button till the speaker says “power on” to start, then it will automatically search and pair with the device. If there is no device to pair after 8 minutes, the speaker will automatically turn of. 4. Bluetooth disconnection When the speaker is playing via Bluetooth, plugging in the audio cable will cause Bluetooth function to be disconnected. Microphone Hole VOL+/NEXT ON/OFF & Play/Pause VOL-/FWD 5. Microphone Hole DIAGRAM 2 For hands-free phone call answering and Skype chatting. 6. Micro USB Charging Port For charging the built-in Li-polymer battery. 7. Removable Kickstand It has a removable metal stand for supporting your device like iPad and Smartphone and keeping it at a perfect viewing angle. 3.5mm Audio Input Socket 8. LED indicator (see Diagram 2 below) 8.1 Removable Kickstand LED Indicator Micro USB Charging Port Red LED indicates the speaker is in charging mode. When charging, the red LED light will remain on. When the battery is fully charged the red light will DIAGRAM 3 automatically turn of. 8.2 Blue LED indicates the speaker is in Bluetooth or microphone mode. 8.3 Green LED indicates that the speaker is connected with an audio cable. When the speaker is playing via audio cable, please note it can’t change the song by “-” and “+” buttons. 9. Rubber Clamp For sliding onto the edge of your notebook, holding your device like iPad and Smartphone. NOTE: Audio source of mobile phone may be mono or dual track. When Bluetooth is paired with your phone, if it’s dual track, the buttons of speaker may not be controlled. User Manual Rubber Clamp Morph Technical Specifications MODEL FEATURES COMPATIBILITY TRANSMISSION DISTANCE FRECUENCY RANGE SPEAKER UNIT AUDIO INPUT CONECTOR AUX CABLE CHARGING INTERFACE BATTERY CHARGING VOLTAGE QUO MORPH WARRANTY 1 Year SKU COLOR Red color QSPR-410BT-RD Bluetooth speaker Blue color QSPR-410BT-BL Call Handsfree Black color QSPR-410BT-BK Phone, Tablet or Computer stand FCC Warning Statement Volume/Song track control This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection Bluetooth 3.0 against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. 10 Meters 180Hz-20KHz Diameter 40mm, inner magnetic 4Ω,3W*2 3.5mm --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. support aux external audio input. Micro USB Built-in lithium battery, 3.7V/1000mAh 5V/1A CHARGING TIME 3-4 hours WORKING TIME 6 hours --Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. such modifications could void the user's authority to operate this equipment. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. * RF warning for portable device: The device has been evaluated to meet general rf exposure requirement. the device can be used in portable exposure condition without restriction. SERIAL # MATERIAL ABS + Rubber SENSITIVITY ≥90dB DISTORTION ≤ 1% WEIGHT SIZE CONTENT & ACCESSORIES 348g For support information please refer to QUOmobility.com website. 135*72*49 mm User manual, 1x USB charging cable, 1x 3.5mm AUX cable User Manual Copyright © 2015 QUO. ALL RIGHTS RESERVED. The info displayed on this user manual is referential only and may slightly difer from the actual product info. QUO is a registered trademark. Morph
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2015:06:09 11:13:37-04:00 Creator : Adobe InDesign CC 2014 (Macintosh) Modify Date : 2015:07:13 16:59:11+08:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2015:07:13 16:59:11+08:00 Creator Tool : Adobe InDesign CC 2014 (Macintosh) Instance ID : uuid:5421d003-1719-4dc3-9be2-36462bfa654e Original Document ID : xmp.did:FB7F11740720681195FED47453C8FE35 Document ID : xmp.id:61497fd1-b986-4343-ab2e-6fb368373ed9 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:3419de91-617b-4dfc-87d1-d74a70ddb0b3 Derived From Document ID : xmp.did:71ACDA18FB0DE5118ABDAEC9E7F8B7F7 Derived From Original Document ID: xmp.did:FB7F11740720681195FED47453C8FE35 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2014 (Macintosh) History Changed : / History When : 2015:06:09 11:13:37-04:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 4EXIF Metadata provided by EXIF.tools