KEEBOX W150NR WIRELESS N 150 HOME ROUTER User Manual ug w150nr v1 100702

Download:
Mirror Download [FCC.gov]
Document ID	1314612
Application ID	aoBEly3sAZ59jPyalC+dSA==
Document Description	Users Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	219.61kB (2745079 bits)
Date Submitted	2010-07-20 00:00:00
Date Available	2010-07-21 00:00:00
Creation Date	2010-07-15 18:00:06
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-07-20 11:08:34
Document Title	Microsoft Word - ug_w150nr v1_100702_.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	03946

KEEBOX Wireless 11n Router
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you
with a username and password. This option is typically used for DSL services.
Fields
WAN Interface Type
Hostname
MAC address
My IP address
My Subnet Mask
Gateway IP Address
Login
Password
Service IP address
MTU
Type
Description
Use the drop-down list to choose between Dynamic IP and Static IP.
The selection appears when choosing Dynamic IP in WAN Interface Type. This
field is optional, but may be required by some ISPs. The default host name is the
device name of the Router and may be changed.
The selection appears when choosing Dynamic IP in WAN Interface Type. The
default MAC address is set to the WAN’s physical interface MAC address on the
Router. You can use the Clone MAC button to copy the MAC address of the
Ethernet Card installed by your ISP and replace the WAN MAC address with the
MAC address of the Router. It is not recommended that you change the default
MAC address unless required by your ISP.
The selection appears when choosing Static IP in WAN Interface Type. Enter
the IP address assigned by your ISP.
Enter the subnet mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the L2TP login name.
Enter the L2TP password.
Enter the ISP service IP address.
Maximum Transmission Unit is for optimal performance with some ISPs.
Use the drop-down list to select Keep Connection, Automatic Connection or
Manual Connection.
25
KEEBOX Wireless 11n Router
Idle Timeout
This is an age-out value, in minutes, before the Router times out.
Click Apply to save the changes.
Wireless 2.4GHZ
This chapter provides more manual settings about Wireless connection.
Basic
This window allows you to define SSID and the channel for the wireless connection.
Fields
Radio
Schedule
Wireless Mode
SSID
Auto channel
Channel
WMM Enable
Description
Use the radio buttons to enable or disable the wireless function.
Use the drop-down list to choose the appropriate time to enable the wireless function.
Select Always to enable the function all the time. To create a new schedule, click New
Schedule to link to System > Schedule.
Use the drop-down list to choose the type of wireless.
Service Set Identifier (SSID) is the name of the wireless network.
Click Enable to allow the Router to select the channel with the least amount of
interference. Click Disable to manually select the channel below.
Use the drop-down list to select the channel of wireless network.
Tick the check box to enable Wi-Fi Multimedia to enjoy basic quality of service
features.
Click Apply to save the changes.
26
KEEBOX Wireless 11n Router
Advanced
This window allows you to change the behavior of the 802.11g wireless radio from the standard settings.
Be aware that any changes to the factory default settings may adversely affect the behavior of your
network.
Fields
Fragment Threshold
RTS Threshold
Beacon Interval
DTIM Period
Preamble Type
CTS Protection
Band Width
Description
The fragmentation threshold, which is specified in bytes, determines whether
packets will be fragmented.
This value should remain at its default setting of 2346. If inconsistent data flow is
a problem, only a minor modification should be made.
Beacons are packets sent by an Access Point to synchronize a wireless network.
Specify a value. 100 is the default setting and is recommended.
A DTIM is a countdown informing clients of the next window for listening to
broadcast and multicast messages.
Select Short or Long Preamble. The Preamble defines the length of the CRC
block for communication between the wireless router and the roaming wireless
network adapters.
CTS is a function used to minimize collisions among wireless devices on a
wireless local area network (LAN). CTS will make sure the wireless network is
clear before a wireless client attempts to send wireless data. Enabling CTS will
add overhead and may lower wireless through put.
Use the drop-down list to select the bandwidth. Select 20/40 MHz (Auto) if you
are using both 802.11n and non-802.11n wireless devices. Select 20 MHz if you
are not using any 802.11n wireless clients.
27
KEEBOX Wireless 11n Router
Tx Power
Short Guard Interval
Use the drop-down list to select the percentage of Tx Power.
Check this box to reduce the guard interval time therefore increasing the data
capacity. However, it’s less reliable and may create higher data loss.
Click Apply to save the changes.
Security
This window allows you to configure the wireless security settings.
Fields
Broadcast SSID
WMM
Encryption
Description
Use the drop-down list to broadcasting the SSID or not.
Use the drop-down list to enable or disable Wi-Fi Multimedia.
Use the drop-down list to select the wireless security mode. The available choices are
WEP, WEA Only, WPA2 Only and WPA/WPA2 Mixed.
WEP
Select WEP from the Encryption drop-down list to see the following window.
28
KEEBOX Wireless 11n Router
Fields
Authentication type
Key Length
Key type
Default key
Encryption Key 1 to
Description
Click the radio buttons to select Open System or Shared Key. Shared key provide
greater security.
Select either 64Bit or 128Bit encryption from the drop-down list.
Select ASCII (5 characters) or ASCII (10 characters) from the drop-down list.
Select the default key for the wireless from the drop-down list.
Enter WEP key here. Make sure you enter this key exactly on all your wireless
devices.
Click Apply to save the changes.
WPA Only / WPA2 Only / WPA/WPA2 Mixed
Select other types of wireless security modes from the Encryption drop-down list to see the following
window.
29
KEEBOX Wireless 11n Router
Fields
PSK / EAP type
WPA type
RADIUS Server IP
address
RADIUS Server
port
RADIUS Server
password
Description
Use the radio button to select PSK or EAP type.
Use the radio button to select TKIP, AES or Mixed type.
Enter the IP address of a RADIUS server.
Enter the port you are using with the RADIUS server.
Enter the passport of the RADIUS server.
Click Apply to save the changes.
WPS
Wi-Fi Protected Setup (WPS) provides an easier way to allow your wireless clients to connection to your
network, using PIN or Push Button (PBC) method.
30
KEEBOX Wireless 11n Router
The following fields can be configured:
Fields
Description
WPS
Tick the Enable check box to enable the Wi-Fi protected setup function. Deselect to
disable the function.
Passphrase Key
Enter a key for connecting the wireless network.
This virtual Start to Process button has the same function as the physical WPS
WPS via Push
button on the hardware device. Click to start WPS connection.
button
WPS via PIN
Enter the password for WPS connection and click Start to Process to start WPS
connection.
Click Apply to save the changes.
Client List
This window displays all the clients of wireless connection.
31
KEEBOX Wireless 11n Router
Click the Refresh button to update the status.
Firewall
This chapter provides more choices for firewall setup.
32
KEEBOX Wireless 11n Router
Advanced
This window allows you to choose more firewall settings.
Tick the check box to select the firewall settings. Click Apply to save the changes.
33
KEEBOX Wireless 11n Router
DMZ
This window allows you to set up a DMZ host and to set up firewall rules. If you have a client PC that
cannot run Internet applications properly from behind the Router, then you can set the client up for
unrestricted Internet access. It allows a computer to be exposed to the Internet. Enter the IP address of
the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may
expose your local network to a variety of security risks, so only use this option as a last resort.
Fields
Enable DMZ
Local IP Address
Description
Check this box to enable DMZ.
Enter the IP address of the computer you would like to open all ports to.
Click Apply to save the changes.
34
KEEBOX Wireless 11n Router
DoS
The firewall can detect and block Denial of Service (DoS) attackes.
Click the Enable radio button to detect and block the DoS attacks. Click Apply to save the changes.
35
KEEBOX Wireless 11n Router
MAC Filter
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their
MAC addresses from accessing the Network.
Fields
Enable MAC
filtering
Description
Tick Enable Wireless MAC Filter check box and click the Deny all clients with
MAC address listed below to access the network, or Allow all clients with
MAC address listed below to access the network of the filtering policy.
Description
Enter the description for this MAC filtering rule.
LAN MAC address Enter the MAC address of LAN to block.
Schedule
Use the drop-down list to choose the appropriate time to enable the MAC filtering
function. Select Always to enable the function all the time. To create a new
schedule, click New Schedule to link to System > Schedule.
Click Add to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under Select, and click Delete Selected. To remove all entries, click
Delete All. Click Reset to clear all the information that has not been saved.
Click Apply to save the changes.
36
KEEBOX Wireless 11n Router
URL Filter
Use this window to deny access to specified websites.
Fields
Enable URL Blocking
URL/keyword
Schedule
Description
Tick the check box to enable the function.
Enter the IP address or keyword to block.
Use the drop-down list to choose the appropriate time to enable the MAC
filtering function. Select Always to enable the function all the time. To create a
new schedule, click New Schedule to link to System > Schedule.
Click Add to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under Select, and click Delete Selected. To remove all entries, click
Delete All. Click Reset to clear all the information that has not been saved.
Click Apply to save the changes.
37
KEEBOX Wireless 11n Router
Advanced
This chapter include the more advanced features used for network management and security.
NAT
Network Address Translation (NAT) re-writes the source and/or destination addresses of IP packets as
they pass through a Router or firewall. NAT enables multiple hosts on a private network to access the
Internet using a single public IP address.
Click the Enable radio button and the Apply button to enable the NAT function.
38
KEEBOX Wireless 11n Router
Port Forwarding
Port Forwarding is used to redirect data to a single PC.
Fields
Enable Port
Forwarding
Description
Local IP
Protocol
Local Port
Public Port
Schedule
Description
Tick the check box to enable the function.
Enter the description of this rule.
Enter a local IP address.
Use the drop-down list to select the protocol as TCP, UDP or Both.
Enter the local port.
Enter a public port.
Use the drop-down list to choose the appropriate time to enable the MAC filtering
function. Select Always to enable the function all the time. To create a new schedule,
click New Schedule to link to System > Schedule.
Click Add to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under Select, and click Delete Selected. To remove all entries, click
Delete All. Click Reset to clear all the information that has not been saved.
Click Apply to save the changes.
39
KEEBOX Wireless 11n Router
Port Trigger
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet
telephony and others. These applications have difficulties working through NAT (Network Address
Translation). Special Applications makes some of these applications work with the Router.
Fields
Enable Trigger
Port
Description
Popular
applications
Trigger port
Description
Tick the check box to enable the function.
Enter the description of this rule.
Use the drop-down list to select an application or click Add to create a new one.
This is the port used to trigger the application. It can be either a single port or a range
of ports.
Trigger type
Use the drop-down list to select the trigger type as TCP, UDP or Both.
Public port
This is the port number on the WAN side that will be used to access the application.
Public type
Use the drop-down list to select the pblic type as TCP, UDP or Both.
Schedule
Use the drop-down list to choose the appropriate time to enable the MAC filtering
function. Select Always to enable the function all the time. To create a new schedule,
click New Schedule to link to System > Schedule.
Click Add to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under Select, and click Delete Selected. To remove all entries, click
Delete All. Click Reset to clear all the information that has not been saved.
Click Apply to save the changes.
40
KEEBOX Wireless 11n Router
UPnP
UPnP supports zero-configuration networking and automatic discovery for many types of networked
devices. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain
an IP address, convey its capabilities, and learn about the presence and capabilities of other devices.
DHCP and DNS service can also be used if available on the network. UPnP also allows supported
devices to leave a network automatically without adverse effects to the device or other devices on the
network. UPnP is a protocol supported by diverse networking media including Ethernet, Firewire, phone
line, and power line networking.
To enable UPnP for any available connection, click the Enable radio button, and click the Apply button.
41
KEEBOX Wireless 11n Router
QoS
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By
default the QoS Engine settings are disabled and application priority is not classified automatically
Fields
Enable QoS
Engine
Automatic
Uplink Speed
Measured
Uplink Speed
Manual Uplink
Speed
Connection
Type
Detected xDSL
or Other Frame
Relay Network
Description
Tick the check box to enable this option for better performance and experience with
online games and other interactive applications, such as VoIP.
Tick the check box to automatically determine the uplink speed of your Internet
connection.
The speed at which data can be transferred from the Router to your ISP. This is
determined by your ISP.
Enter the uplink speed.
Use the drop-down menu to select the connection type among Auto-detect, xDSL Or
Other Frame Relay Network and Cable or Other Broadband Network.
When Connection Type is set to Auto-detect, the automatically detected connection
type is displayed here.
Click Apply to save the changes.
42
KEEBOX Wireless 11n Router
Routing
This window allows you to define static routes to defined destinations.
Fields
Static Routing
Interface
Description
Tick this checkbox to enable or disable static routes to defined destinations.
Use the drop-down menu to choose the Interface that the IP packet must use to transit
out of the Router.
Destination
The IP address of the packets that will take this route.
Subnet Mask
Enter the subnet mask of the IP address
Gateway
Enter the next hop to be taken if this route is used.
Click Add to save the changes and see the rule in the MAC Filtering table. To remove a specific entry,
tick the corresponding check boxes under Select, and click Delete Selected. To remove all entries, click
Delete All. Click Reset to clear all the information that has not been saved.
Click Apply to save the changes.
43
KEEBOX Wireless 11n Router
Tools
Password
This window allows you to change the password and default IP address of the Router.
Fields
Old Password
New Password
Repeat New
Password
Host Address
Port
Enable
Description
Enter the existing password when log in the Router.
Enter a new login password.
Retype the new login password.
Enter the Internet IP address of the computer that has access to the Router.
Enter a port number to access the Router.
Tick the check box to enable the remote management function.
Click Apply to save the changes.
44
KEEBOX Wireless 11n Router
Time
This window allows you to configure time and date of the Router.
Fields
Time Setup
PC Date and
Time
NTP Time
Server
Time Zone
Daylight Saving
Description
Use the drop-down list to synchronize the Router’s time with your computer or an NTP
server.
This field appears when selecting Synchronize with PC in the Time Setup drop-down
list. This field displays the current PC time.
This field appears when selecting Synchronize with the NTP Server in the Time
Setup drop-down list. Enter the IP address of the NTP server.
Use the drop-down list to select your time zone.
Tick the Enable check box to enable daylight saving.
Click Apply to save the changes.
45
KEEBOX Wireless 11n Router
DDNS
The Router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a
dynamic public IP address to be associated with a static host name in any of the many domains, allowing
access to a specified host from various locations on the Internet. This is enabled to allow remote access
to a host by clicking a hyperlinked URL in the form hostname.dyndns.org, Many ISPs assign public IP
addresses using DHCP, this can make it difficult to locate a specific host on the LAN using standard DNS.
If for example you are running a public web server or VPN server on your LAN, this ensures that the host
can be located from the Internet if the public IP address changes. DDNS requires that an account be
setup with one of the supported DDNS providers.
Fields
Dynamic DNS
Server Address
Host Name
Username
Password
Description
Click the Enable radio button to enable supporting for DDNS.
Select one of the DDNS registration organizations form those listed in the pull-down
menu.
Enter the host name of the DDNS server.
Enter the username given to you by your DDNS server.
Enter the password or key given to you by your DDNS server.
Click Apply to save the changes.
46
KEEBOX Wireless 11n Router
Diagnostic
This window is used to test connectivity of the Router.
Fields
Address to Ping
Ping Result
Description
Enter the IP Address that you wish to Ping, and click Start.
The field displays the result after pinging.
47
KEEBOX Wireless 11n Router
Firmware
This window is for upgrading firmware of the Router.
Click Browse to locate the new firmware and click Apply to start firmware upgrade.
48
KEEBOX Wireless 11n Router
Backup
This window allows you to set the Route to original factory default setting, back up the configurations and
restore the configuration you saved in the local computer.
Fields
Restore to factory
default
Backup Settings
Restore Settings
Description
Click the Reset button to restore all configuration settings back to its factory default
settings. The Router will reboot with the factory default settings including IP settings
(192.168.10.1) and administrator password.
Click the Save button to save the current Router configuration settings to a file on the
hard disk of the computer.
Click Browse to locate the configuration file you saved for the Router and click the
Upload button to transfer the settings to the Router.
49
KEEBOX Wireless 11n Router
Restart
This window is for you to restart the Router.
Click Apply to restart the Router.
50
KEEBOX Wireless 11n Router
Limited Warranty
KEEBOX warrants its products against defects in material and workmanship, under normal use and
service, for the following lengths of time from the date of purchase.
W150NR – 1 Year Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period, KEEBOX shall reserve
the right, at its expense, to repair or replace the defective product or part and deliver an equivalent
product or part to the customer. The repair/replacement unit’s warranty continues from the original date of
purchase. All products that are replaced become the property of KEEBOX. Replacement products may be
new or reconditioned. KEEBOX does not issue refunds or credit. Please contact the point-of-purchase for
their return policies.
KEEBOX shall not be responsible for any software, firmware, information, or memory data of customer
contained in, stored on, or integrated with any products returned to KEEBOX pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product
by any unauthorized service center. This warranty is voided if (i) the product has been modified or
repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper
use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting KEEBOX within the applicable warranty period and
providing a copy of the dated proof of the purchase. Upon proper submission of required documentation a
Return Material Authorization (RMA) number will be issued. An RMA number is required in order to
initiate warranty service support for all KEEBOX products. Products that are sent to KEEBOX for RMA
service must have the RMA number marked on the outside of return packages and sent to KEEBOX
prepaid, insured and packaged appropriately for safe shipment. Customers shipping from outside of the
USA and Canada are responsible for return shipping fees. Customers shipping from outside of the USA
are responsible for custom charges, including but not limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE KEEBOX PRODUCT DOES NOT OPERATE AS WARRANTED
ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT KEEBOX’S OPTION, REPAIR OR
REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. KEEBOX NEITHER ASSUMES NOR AUTHORIZES ANY
OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION MAINTENANCE OR USE OF KEEBOX’S PRODUCTS.
KEEBOX SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED
BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND
THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW KEEBOX ALSO EXCLUDES
FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR
IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
51
KEEBOX Wireless 11n Router
FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT
KEEBOX’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF
ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Some KEEBOX products include software code written by third party developers. These codes are
subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL").
Go to http://www.KEEBOX.com/gpl or http://www.KEEBOX.com Download section and look for the
desired KEEBOX product to access to the GPL Code or LGPL Code. These codes are distributed
WITHOUT WARRANTY and are subject to the copyrights of the developers. KEEBOX does not provide
technical support for these codes. Please go to http://www.gnu.org/licenses/gpl.txt
or http://www.gnu.org/licenses/lgpl.txt for specific terms of each license.
52
KEEBOX Wireless 11n Router
_______________________________________________________________
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void
the user's authority to operate the equipment.
This equipment must be installed and operated in accordance with provided instructions and
the antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying RF exposure
compliance.
KEEBOX
W150NR
53
KEEBOX Wireless 11n Router
53

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 03946
Create Date                     : 2010:07:15 18:00:06+08:00
Modify Date                     : 2010:07:20 11:08:34+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2010:07:20 11:08:34+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : Microsoft Word - ug_w150nr v1_100702_.doc
Creator                         : 03946
Document ID                     : uuid:975a05b3-61ba-4e77-8ff9-7cf4363982bf
Instance ID                     : uuid:528f6a22-cdc8-4041-a649-74f94c64ae3d
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 30

EXIF Metadata provided by EXIF.tools