KENWIN KENWIN00005 Soundbar with Wireless Subwoofer User Manual HSB3280 F7 indd

Download:
Mirror Download [FCC.gov]
Document ID	1356656
Application ID	S0Yo2C0jt5wasebRx4FZZQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	243.9kB (3048774 bits)
Date Submitted	2010-10-11 00:00:00
Date Available	2010-10-11 00:00:00
Creation Date	2010-06-12 10:16:01
Producing Software	Adobe PDF library 7.77
Document Lastmod	2010-08-14 11:20:25
Document Title	HSB3280_F7.indd
Document Creator	Adobe Illustrator CS2
Document Author:	cnh50205

ER
PO
Designed for high performance audio in a very compact package
with simple and intuitive set up and daily control
KW-SB001
Contents
1 Important
2 Your Soundbar System
3 Get started
Important safety instructions
Introduction
What’s in the box
Overview of the main unit
Overview of the remote control
Attach the stand
Connect AUDIO devices
Option 1: Connect this soundbar to
an external device
Option 2: Connect this soundbar to
the TV set
Activite wireless pairing
4 Appendix
10
Mount to a wall
10
5 Specification
12
General
12
EN
1 Important
Important safety instruction
1.
Read these instructions – All the safety and operating instructions should be read
before this product is operated.
2. Keep these instructions – The safety and operating instructions should be
retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions – All operating and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near
water or moisture – for example, in a wet basement or near a swimming pool, and
the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacture’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped.
EN-3
24. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
- Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
�
Reorient or relocate the receiving antenna.
�
Increase the separation between the equipment and receiver.
�
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
�
Consult the dealer or an experienced radio/TV technician for help.
�
“FCC RF Radiation Exposure Statement Caution: To maintain compliance with the
FCC’s RF exposure guidelines, place the product at least 20cm from nearby
persons.”
Overview of the main unit
9 10 11 12 13
SPEAKER
MUTE button
Turning off the sound temporarily.
To restore the sound, press the
button again or adjust the volume.
FX SURROUND button
Listen to a more realistic sound
than stereo sound.
STANDBY button
Turn on/off the system.
SOURCE button
Select the input sound
(AUX IN 1, AUX IN 2, AUX IN 3).
VOLUME +/- button
Adjust the volume.
EN-6
SUBWOOFER button
Adjust the output level within
the range of -6dB to +6dB.
REMOTE SENSOR
AUX IN 1 jack
AV input socket.
10
AUX IN 2 jack
AV input socket.
11
AUX IN 3 jack
Connect audio output socket.
12
PAIRING button
To pair speakers.
13
AC MAINS
Inlet for power cord.
3 Get started
Overview of the remote
control
Attach the stand
POWER
STANDBY button
Turn on/off the system.
FX SURROUND button
Listen to a more realistic sound
than stereo sound.
SUBWOOFER VOLUME button
Adjust the output level within
the range of -6dB to +6dB.
MUTE button
Turning off the sound temporarily.
To restore the sound, press the
button again or adjust the volume.
SOURCE button
Select the input sound
(AUX IN 1, AUX IN 2, AUX IN 3).
VOLUME +/- button
Adjust the volume.
EN-7
Place the supplied table stand onto the
rear of the main unit until the hook enter
the hole of the main unit completely.
Slide the supplied table stand upward
along the hole of the main unit.
Connect AUDIO devices
Note
•
•
•
•
AUX IN 3
There are various ways to connect the soundbar to
other audio devices. You only need to select the best
option that fits your existing audio device setup.
For AV connection to the soundbar, there are multiple
sets of AV sockets available on the main unit. You can
choose either set for an AV connection.
When you connect cables, ensure that the color of the
plug matches the color of the socket.
The types of audio devices and connections in the
following instructions are for reference only.
Option 2:Connect this soundbar to
the TV set
Option 1:Connect this soundbar to
an external device
You can also connect the red/white audio
connectors of the AV cable from the TV
to a set of audio input sockets.
You can connect the audio player (e.g.MP3
player) if the player has an available audio
output socket, follow these instructions.
Note
• It is unnecessary to connect the yellow video
connectors.
If the audio player has a digital output
socket, connect the 3.5mm stereo plug
from the player to the AUX IN 3 socket.
Press SOURCE button on the wireless
sound system to select”AUX IN 3” input.
AUX IN 1
Adjust the volume of the wireless sound
system.
Not used
Note
•
•
To avoid distorted sound, make sure that any equalizer
function of your external device is turned off.
Reduce the volume of the wireless aound system
before connecting.
AUDIO OUT
TV
Press SOURCE button on the wireless
sound system to select”AUX IN 1 or 2”
input.
EN-8
Activite wireless pairing
and soundbar
PAIRING lamp
Check if the power voltage, as shown on
the type plate located on the rear of the
set, corresponds to your local AC power
supply. If it does not, cousult your dealer
or service centre.
Connect the power cord of soundbar
and subwoofer to the wall outlet.
PAIRING lamp stops blinking.
and soundbar
soundbar
Note
•
soundbar.
soundbar
•
soundbar
PAIRING
PAIRING lamp
PAIRING
EN-9
cancelled
4 Appendix
Mount the soundbar
Caution
Mount to a wall
• To f ind a suitable mounting location, make the
•
Caution
•
•
Risk of product damage! Always consult professional
personnel to safely mount the product to a wall.
Risk of injury! Ensure that no supply ducts such as gas,
water or electricity are harmed when you drill the
holes.
necessary physical and wireless connections.
Mount the soundbar to a solid concrete wall or
plaster board wall only!
You can use the supplied bracket to mount the
soundbar to the wall.
Align the bracket in the chosen location
on a wall. Use a pencil to mark the drilling
positions.
What’s in the supplied mounting kit
2 x wall mount bracket for the soundbar
4 x screws
What else you’ll need
•
•
•
Electric drill
Screwdriver
Pencil
EN-10
Drill holes as marked.
3
Secure the wall mount bracket on the
wall with 4 supplied screws.
Hook the soundbar in place.
EN-11
5 Specification
General
57mm x 96mm x 780mm
260mm x 500mm x 150mm
Soundbar
Subwoofer
Soundbar frequency response
Subwoofer frequency response
230 - 20,000 Hz
38 - 250 Hz
<1W
EN-12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:08:14 11:20:25+08:00
Create Date                     : 2010:06:12 10:16:01+08:00
Metadata Date                   : 2010:08:14 11:20:25+08:00
Creator Tool                    : Adobe Illustrator CS2
Format                          : application/pdf
Title                           : HSB3280_F7.indd
Creator                         : cnh50205
Document ID                     : uuid:bd0b9953-683c-4009-8cdd-935c2cd8c4e7
Instance ID                     : uuid:0c9ada48-ed9b-4e91-87d5-87c2c5770981
Producer                        : Adobe PDF library 7.77
Page Count                      : 12
Author                          : cnh50205

EXIF Metadata provided by EXIF.tools