KHN Solutions BTBLE40 Bluetooth Module for use with Breath Alcohol Detector User Manual BacTrack BLE Module Rev B System Overview

Download:
Mirror Download [FCC.gov]
Document ID	1943236
Application ID	KpiCZrZuLhySv3dhle6JGw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.42kB (217780 bits)
Date Submitted	2013-04-17 00:00:00
Date Available	2013-10-10 00:00:00
Creation Date	2017-10-27 19:44:36
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-27 19:44:36
Document Title	BacTrack BLE Module Rev_B System Overview
Document Creator	Pages
Document Author:	Raymond Kampmeier

User’s Manual
This product is not meant for general use. It is intended for connection in a single
embedded system.
This device communicates with a BacTrack Breathalyzer over the 30 pin connecter
interface. A proprietary UART communication protocol is used and it’s details are
specified in “Smartphone_Protocol_Rev2.7.xlsx”.
The following image describes the pinout for the 30 pin connector interface for this
module.
Connector Details:
The mezzanine connector used on this module is the Panasonic
AXK6F30547YG. The mating connector used for interfacing to this product is the
Panasonic AXK5F30537YG.
The mating circuitry should interface to the module using a circuit similar to the
following:
Brief explanation of signal characteristics:
- LED connections are open drain and should be connected as shown above.
- SHUTDOWN has a logic high minimum of 1.6V:
- SHUTDOWN: High (power on) (1.6V ~ 2.1V)
- SHUTDOWN : Low (power is shutting down 50ms after high -> low transition) (0V ~
0.5V)
- TX 2.1V : High (1.6V ~ 2.1V)
- TX 2.1V: Low (0V ~ 0.5V)
- RX 2.1V :High (2.1V)
- RX 2.1V: Low (0V ~ 0.5V)
- VCC_2.1V should be used only for external level translation
Other Operation Notes:
- Current should be limited to below 35mA going into the LED Cathode signals.
- V_USB should be provided in the range of 4.35V to 26V
- A single 300mAh Lithium-Ion cell should be connected to V_BAT and should be
present during all operation of the device.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Author                          : Raymond Kampmeier
Create Date                     : 2013:04:11 10:28:43-07:00
Modify Date                     : 2013:04:16 15:56:57-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Raymond Kampmeier
Title                           : BacTrack BLE Module Rev_B System Overview
Creator Tool                    : Pages
Metadata Date                   : 2013:04:16 15:56:57-07:00
Keywords                        : 
Producer                        : Acrobat Distiller 10.1.3 (Windows)
Document ID                     : uuid:9953805f-6faf-430c-ae77-0995ab74bcb5
Instance ID                     : uuid:ae3a0713-f83a-44a1-b424-7424d8891a91
Page Count                      : 3

EXIF Metadata provided by EXIF.tools