KIMIN Electronics TLL-1000A TV LINK LOADER User Manual User s Manual H

Kimin Electronic Co., Ltd TV LINK LOADER User s Manual H

USERS MANUAL

EUT Type: TV Link Loader FCC ID: TGETLL-1000A Test Report No.: GETEC-E3-05-073 FCC Class B Certification APPENDIX H : USER’S MANUAL
TV Link LoaderUser’s Manualⓒ2005 KIMIN Electronics
* When violated lower part item, serious injury or death can happen.Attention for Safety'Attention for Safety' is to prevent accident and danger beforehand using product safety and right.Two or three main point in place that keep necessarily and can see alway9In case this product wet in water, do not put in could apply heat place to dry.Can explode or be responsible for transformation or breakdown.9Do not use in place that temperature is high or there is moisture.Whether wet because of rain or spill drinking water and so on, in if use be responsible for battery explosion or be responsible for breakdown can.9When wild wind, thunder, lightning strike extremely, control useof product, and unplug supply cord and charger.Can wound serious injury by lightning strike, and fire can breakout.9Disjoint product voluntarily, or do not shock.9Power cord is not reflected, and do not use charge Adapter when part that inserts concert is loose.9Do to put heavy thing on power cord or is not spread.9Do not stare infrared rays window directly at infrared rays communication.There is danger of eyesight damage.Warning
* When violated lower part item, slight injury or product damagecan happen.¾After avoid shock and impact, and extract when nonuse or when isabsent power cord, keep in safe place.¾Do not drop or strike or shake product extremely.¾When wild wind, thunder, lightning strike extremely, control useof product, and unplug together supply cord and charger.¾Disjoint product voluntarily, or do not shock.¾Place that there are much dusts avoids setup, and do supply cordso that do not approximate to heating appliances.¾After is charged when nonuse battery and leave many long hours, keep at normal temperature.¾In case of use again battery after leaving alone many long hours, have better use after charge perfectly.Caution
¾Contents1. Intro2. Each Button Function Explanation3. To charge, to turn on Power4. STANDBY Mode5. Installation Menu Log-in6. To use Installation Menu7. Password Substitute8. Debug Mode9. Channel Edit Program10. Electrical standard11. Construction
Intro1Thank for buying TV Link Loader. This product has following function.Remote Control Function: Achieve channel and volume Up, Down of general remote controland function of OK button.Channel Information Storage Function: Can do channel information of TV to do storage on TV Link Loader interior.Channel Information Transfer Facility: Can transmit channel information of TV that is stored to TV Link Loader on other TV.* Use extent is limitative in other TV product that product that see isexclusive use special procurements mounting of LG Electronicscommercial LCD TV.Function of This Product
Each button function explanation2It is button that act Channel Down of general remote control according to mode, Volume Down role.Down ButtonEnter to Password Mode, and it is button that act as enter of general remote control.Enter ButtonIt is button that act Channel Up of general remote control according to mode, Volume Up role.Up ButtonIt is button to store channel information of TV by TV Link Loader through RS232 communication.Receive ButtonIt is button to transmit channel information that is stored in TV Link Loader by TV through infrared-ray communication.Send ButtonIt is when enter by TV INSTALLATION MENU and button that select Up, mode of Down button.MODE Button
To charge, to turn on Power3DC 9V AdapterIf chargeConnect 9V DC Adapter in marked position that is and insert to 220V AC concert.If turn on power supplyAnd that is , do marked place's switch by ON.After power on9Confirm that phrase called "TV Link" in LCD original idea first line and "Ready" in second line is marked.9Confirm that battery residual quantity on the right top portion and arrow on right lower column are marked.9When connected Adapter all, confirm since light is lighted in 'Power'.9When connected Adapter all, battery does not pack, confirm whether light is lighted in 'Charge'.TVLinkReadyÅÆConnect 9V DC Adapter in marked position that is and insert to 220V AC concert.
STANDBY Mode4What is ‘STANDBY’When power supply enters, is situation that do not act other thing to minimize consumption of current."Standby" is marked in second line of LCD.If get into 'STANDBY' stateTurn on power supply and in case there is no any manufacturing for 30 seconds, get into 'Standby' state.Also, get into 'Standby' state to when there is no any manufacturing after channel information transmission or for after click button 20 seconds.If escape in 'STANDBY' statePress 'Receive' button, or turn on again while put out power supply.TVLinkStandby
Installation Menu Log-in5If come to Installation MenuFirst, Put TV Link Loader's top portion infrared rays communications department by TV and push MODE button more than 3 seconds.Turn TV Link Loader by TV when Installation menu is marked.Then, Installation menu is appeared automatically.If is not come to Installation menuConfirm whether TV Password and TV Link Loader's Password agree.If Password is same, try again.In case may not be so, inquire to service center.TVLinkModeIn
To use Installation Menu6Button manufacturing in Installation menuTransfer between menu changes arrow of LCD right side lower column using Mode button establish as '↕'.Locate cursor to menu that want using Up, Down button.Use Mode button again come to menu of do cursor addition if click Up button after establish as '↔'.If channel information does send-receiveWhen receive channel information, RS232toRJ12 cable connects TV and TV Link Loader's necessarily.Select TV Link Loader in Installation menu.Confirm "Ready to download ..." OSD at TV.In the case of transmission, press Send button.In the case of reception, press Receive button.Confirm Volume OSD of TV and TV Link Loader's LCD for confirmation of progress situation.TVLinkPRG 40< TV OSD >< TV Link Loader LCD>
6If cancel channel information send-receiveWhen transmit channel information, is canceled if click more Send button once.When cancel, confirm "SendErr" in LCD window.When receive channel information, is canceled if click more Receive button once.When cancel, confirm "RcommErr" in LCD window.Channel information at send-receive cautionWhen receive channel information, connect cable necessarily.In case "RCommErr" message is marked in LCD window, confirm cable joint.TVLinkSendErrTVLinkRcommErrChannel information cancel transmissionChannel information eception cancellationTo use Installation Menu
Password Substitute7If come to Password ModePut out TV Link Loader's power supply.If turn on TV Link Loader's power supply in state that click ENTER button, is entered by Password Mode.If change PasswordIf click Up button in Password Mode, can change TV Link Loader's Password if develop into Password of TV convertibly and click Down button.If click selecting, can change number using Up, Down button.Select Password number that want and move by next time number through ENTER button.If click ENTER button in last number, Password is changed.Do 'Confirm' TV Password's case and transmit infrared rays data by TV, and store justly without Confirm case of TV Link Loader Password alteration.Up. TLLDn. TVPassWord0000PasswordMode InChangingPassword
ACMS Data (10byte),PLL Data (4yte)=ProgramInfo(2byte)-Program Number(2byte)R/WEx) R63-24=09A8,dc2503251b20Basic Rule-Basically, transmit 'Hex code' in 'ASCII' form.-When is '0x63', '6' and '3' are transmitted in ASCII form.Instruction1. ReadA. R(Cr) : Is instruction that read all Eeprom data.Ex) r(Cr)R00-24=09A8,2503251b20：：R63-24=09A8,2503251b20(00 ~ 99 to 00 ~ 63 by Hex indication)A. rxxp ,rxp : x,xx = 0~63 Input address in Hex type.Ex) r63(Cr) R63-24=09A8,2503251b20Ex) r2(Cr)R02-24=09A8,2503251b202. WriteA. w63-24=09A8,2503251b20(Cr): Is equal with data format that read except 'W' and 'P'.Can confirm to read after have used through instruction.Debug Mode8Debug Mode Data Format
<Caution>9UART communication is impossible in Standby mode.9Debug mode is not communication with TV but communication with terminal of PC.9Standby mode execution condition9Do confirmation possibility as "Standby" on LCD screen.9Enter by Standby mode after 30 seconds since Power On.9If click any button in Stand by mode, get into Ready state.9At this point, is entered by Standby mode by automatic after 20 seconds if do not any use.9Therefore, while put out power supply when was Standby modeturn on or desire to come by debug mode in 20 drafts after clickReceive key once.9Desire to observe as is entered in Stand by state if there is notransmission for 1 minute after come by debug mode.Debug Mode8
-Functions1. To view/get Channel-Map data of a TV Link Loader.2. To change/update Channel-Map data of a TV Link Loader.-How to ConnectUse a RS232C(PC)-to-stereo (TV Link Loader) Jack for a connection.PC(using Program)Stereo Jack(RS232C)Serial Port(RS232C)-The following screen is Main Screen. Channel Edit Program9
-Downloading Data from TV Link Loader1. Make sure that it’s connected between PC and TV Link Loader and “Ready-state”.2. Click [LOADER=>PC] button. The following screen will be opened, and set up with Default value if you want to change a value.3. If Downloading is failed. Check Comport and a state of a TV Link Loader.-Updating Data to TV Link Loader1. Check Connection (PC–TV Link Loader) and Check “Ready-State”.2. All data in a PC program(Channel Editor) is loaded to a TV Link Loader.-Upload/Download Problem 1. The upload/download data is possible when TV Link Loader is “Ready-State”.2. If upload/download is failed in a “Ready-State”. Turn off and on TV Link Loader and Retry transferring. -Save/Read File 1. Click [Save File] button to save data to the file.2. Click [Read File] button to load data from the file.
-View/Edit Channel Detailed-information 1. You can see following Input screen, when you double-click the [P.no] section.2. You can edit [Picture Carrier Value] in Editor box or the following [Channel Select Box].3. [Channel Select Box] will be opened When You click the [Chg Freq.] Button. 4. The range of Channel Number is 1 ~ 100.
Electrical standard10<Specification>9Power 9Adapter Input : AC230V~50Hz(for EU)AC120V~60Hz(for US)9Adapter Output : DC9V, 300mA9Battery : DC1.2, 400mA (2/3AAA) * 5EA9Use environment condition : 0 ~ 40˚C, 10 ~ 80%9LCD9Panel : 32mm9Need Power : DC5V9Kind : 8 * 2 Character9External form size : 65W * 22H * 120D (mm)
Construction11< TV Link Loader > < DC 9V Adapter (For EU)>< RS232toRJ12 Cable >< Program CD > < User’s Manual >< DC 9V Adapter (For US)>

Navigation menu