KIMIN Electronics TLL-1000A TV LINK LOADER User Manual User s Manual H

Download:
Mirror Download [FCC.gov]
Document ID	597925
Application ID	B7KRQ3sxril8kCiCMPR0pw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	49.79kB (622327 bits)
Date Submitted	2005-11-01 00:00:00
Date Available	2005-10-31 00:00:00
Creation Date	2005-10-31 13:19:33
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2005-10-31 13:20:12
Document Title	Microsoft Word - User_s Manual_H_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	choi

Test Report No.: GETEC-E3-05-073
FCC Class B Certification
APPENDIX H
: USER’S MANUAL
EUT Type: TV Link Loader
FCC ID: TGETLL-1000A
TV Link Loader
User’s Manual
ⓒ2005 KIMIN Electronics
Attention for Safety
'Attention for Safety' is to prevent accident and danger beforehand using
product safety and right.
Two or three main point in place that keep necessarily and can see alway
Warning
* When violated lower part item, serious injury or death can happen.
9 In case this product wet in water, do not put in could apply heat
place to dry.
Can explode or be responsible for transformation or breakdown.
9 Do not use in place that temperature is high or there is moisture.
Whether wet because of rain or spill drinking water and so on, in if use be
responsible for battery explosion
or be responsible for breakdown can.
9 When wild wind, thunder, lightning strike extremely, control use of
product,
and unplug supply cord and charger.
Can wound serious injury by lightning strike, and fire can break out.
9 Disjoint product voluntarily, or do not shock.
9 Power cord is not reflected, and do not use charge Adapter when
part that inserts concert is loose.
9 Do to put heavy thing on power cord or is not spread.
9 Do not stare infrared rays window directly at infrared rays
communication.
There is danger of eyesight damage.
Caution
* When violated lower part item, slight injury or product damage
can happen.
¾ After avoid shock and impact, and extract when nonuse or when is
absent power cord, keep in safe place.
¾ Do not drop or strike or shake product extremely.
¾ When wild wind, thunder, lightning strike extremely, control use of
product, and unplug together supply cord and charger.
¾ Disjoint product voluntarily, or do not shock.
¾ Place that there are much dusts avoids setup, and do supply cord
so that do not approximate to heating appliances.
¾ After is charged when nonuse battery and leave many long hours,
keep at normal temperature.
¾ In case of use again battery after leaving alone many long hours,
have better use after charge perfectly.
¾ Contents
1.
Intro
2.
Each Button Function Explanation
3.
To charge, to turn on Power
4.
STANDBY Mode
5.
Installation Menu Log-in
6.
To use Installation Menu
7.
Password Substitute
8.
Debug Mode
9.
Channel Edit Program
10.
Electrical standard
11.
Construction
1 Intro
Function of This Product
Thank for buying TV Link Loader.
This product has following function.
Remote Control Function
: Achieve channel and volume Up, Down of general remote control
and function of OK button.
Channel Information Storage Function
: Can do channel information of TV to do storage on TV Link
Loader interior.
Channel Information Transfer Facility
: Can transmit channel information of TV that is stored to TV Link
Loader on other TV.
* Use extent is limitative in other TV product that product that see is
exclusive use special procurements mounting of LG Electronics
commercial LCD TV.
2 Each button function explanation
MODE Button
Send Button
It is when enter by TV INSTALLATION MENU and
button that select Up, mode of Down button.
It is button to transmit channel information that is
stored in TV Link Loader by TV through infrared-ray
communication.
Receive Button
It is button to store channel information of TV by
TV Link Loader through RS232 communication.
Up Button
It is button that act Channel Up of general remote
control according to mode, Volume Up role.
Enter Button
Enter to Password Mode, and it is button that act
as enter of general remote control.
Down Button
It is button that act Channel Down of general
remote control according to mode, Volume Down
role.
3 To charge, to turn on Power
If charge
Connect 9V DC Adapter in marked
position
TVLink
ReadyÅÆ
that is
concert.
and insert to 220V AC
DC 9V
Adapter
If turn on power supply
Connect 9V DC Adapter in marked
position
that is
concert.
and insert to 220V AC
And that is
, do marked place's
switch by ON.
After power on
9Confirm that phrase called "TV Link" in LCD original idea first line
and "Ready" in second line is marked.
9Confirm that battery residual quantity on the right top portion and
arrow on right lower column are marked.
9When connected Adapter all, confirm since light is lighted
in 'Power'.
9When connected Adapter all, battery does not pack, confirm
whether light is lighted in 'Charge'.
4 STANDBY Mode
What is ‘STANDBY’
TVLink
Standby
When power supply enters, is
situation that do not act other thing to
minimize consumption of current.
"Standby" is marked in second line of
LCD.
If get into 'STANDBY' state
Turn on power supply and in case
there is no any manufacturing for 30
seconds, get into 'Standby' state.
Also, get into 'Standby' state to
when there is no any manufacturing
after channel information
transmission or for after click button
20 seconds.
If escape in 'STANDBY' state
Press 'Receive' button, or turn on again while
put out power supply.
5 Installation Menu Log-in
If come to Installation Menu
TVLink
ModeIn
First, Put TV Link Loader's top portion infrared
rays communications department by TV and
push MODE button more than 3 seconds.
Turn TV Link Loader by TV when Installation
menu is marked.
Then, Installation menu is appeared
automatically.
If is not come to Installation menu
Confirm whether TV Password and TV Link
Loader's Password agree.
If Password is same, try again.
In case may not be so, inquire to service center.
6 To use Installation Menu
Button manufacturing in Installation menu
Transfer between menu changes arrow of
LCD right side lower column using Mode
button establish as '↕'.
Locate cursor to menu that want using Up,
Down button.
Use Mode button again come to menu of do
cursor addition if click Up button after
establish as '↔'.
If channel information does
send-receive
< TV OSD >
TVLink
PRG 40
< TV Link Loader LCD>
When receive channel information,
RS232toRJ12 cable connects TV and TV
Link Loader's
necessarily.
Select TV Link Loader in Installation
menu.
Confirm "Ready to download ..." OSD at
TV.
In the case of transmission, press Send
button.
In the case of reception, press Receive
button.
Confirm Volume OSD of TV and TV Link
Loader's LCD for confirmation of
progress situation.
6 To use Installation Menu
TVLink
SendErr
Channel information
cancel transmission
TVLink
RcommErr
If cancel channel information
send-receive
When transmit channel information, is
canceled if click more Send button once.
When cancel, confirm "SendErr" in LCD
window.
When receive channel information, is
canceled if click more Receive button once.
When cancel, confirm "RcommErr" in LCD
window.
Channel information
eception cancellation
Channel information
at send-receive caution
When receive channel information, connect
cable necessarily.
In case "RCommErr" message is marked in
LCD window, confirm cable joint.
7 Password Substitute
If come to Password Mode
Put out TV Link Loader's power supply.
If turn on TV Link Loader's power
supply in state that click ENTER button,
is entered by Password Mode.
If change Password
Up. TLL
Dn. TV
PassWord
0000
Password
Mode In
Changing
Password
If click Up button in Password Mode,
can change TV Link Loader's Password
if develop into Password of TV
convertibly and click Down button.
If click selecting, can change number
using Up, Down button.
Select Password number that want and
move by next time number through
ENTER button.
If click ENTER button in last number,
Password is changed.
Do 'Confirm' TV Password's case and
transmit infrared rays data by TV, and
store justly without Confirm case of TV
Link Loader Password alteration.
8 Debug Mode
Debug Mode Data Format
R/W
Program
Number(2byte)
Program
Info(2byt
e)
PLL
Data
(4yte)
ACMS Data
(10byte)
Ex) R63-24=09A8,dc2503251b20
Basic Rule
Basically, transmit 'Hex code' in 'ASCII' form.
When is '0x63', '6' and '3' are transmitted in ASCII form.
Instruction
1.
Read
A.
R(Cr) : Is instruction that read all Eeprom data.
Ex) r(Cr)
R00-24=09A8,2503251b20
：
：
R63-24=09A8,2503251b20
(00 ~ 99 to 00 ~ 63 by Hex indication)
A.
rxxp ,rxp : x,xx = 0~63 Input address in Hex type.
Ex) r63(Cr)
R63-24=09A8,2503251b20
Ex) r2(Cr)
R02-24=09A8,2503251b20
2.
Write
A.
w63-24=09A8,2503251b20(Cr)
: Is equal with data format that read except 'W' and 'P'.
Can confirm to read after have used through instruction.
8 Debug Mode

9 UART communication is impossible in Standby mode.
9 Debug mode is not communication with TV but communication with
terminal of PC.
9 Standby mode execution condition
9 Do confirmation possibility as "Standby" on LCD screen.
9 Enter by Standby mode after 30 seconds since Power On.
9 If click any button in Stand by mode, get into Ready state.
9 At this point, is entered by Standby mode by automatic after 20
seconds if do not any use.
9 Therefore, while put out power supply when was Standby mode
turn on or desire to come by debug mode in 20 drafts after click
Receive key once.
9 Desire to observe as is entered in Stand by state if there is no
transmission for 1 minute after come by debug mode.
9 Channel Edit Program
- Functions
1. To view/get Channel-Map data of a TV Link Loader.
2. To change/update Channel-Map data of a TV Link Loader.
- How to Connect
Use a RS232C(PC)-to-stereo (TV Link Loader) Jack for a connection.
Stereo Jack(RS232C)
PC
(using Program)
Serial Port(RS232C)
- The following screen is Main Screen.
- Downloading Data from TV Link Loader
1. Make sure that it’s connected between PC and TV Link Loader and “Ready-state”.
2. Click [LOADER=>PC] button. The following screen will be opened, and set up
with Default value if you want to change a value.
3. If Downloading is failed. Check Comport and a state of a TV Link Loader.
- Updating Data to TV Link Loader
1. Check Connection (PC–TV Link Loader) and Check “Ready-State”.
2. All data in a PC program(Channel Editor) is loaded to a TV Link Loader.
- Upload/Download Problem
1. The upload/download data is possible when TV Link Loader is “Ready-State”.
2. If upload/download is failed in a “Ready-State”.
Turn off and on TV Link Loader and Retry transferring.
- Save/Read File
1. Click [Save File] button to save data to the file.
2. Click [Read File] button to load data from the file.
- View/Edit Channel Detailed-information
1. You can see following Input screen, when you double-click the [P.no] section.
2. You can edit [Picture Carrier Value] in Editor box or
the following [Channel Select Box].
3. [Channel Select Box] will be opened When You click the [Chg Freq.] Button.
4. The range of Channel Number is 1 ~ 100.
10 Electrical standard

9 Power
9 Adapter Input
9 Adapter Output
9 Battery
9 Use environment condition
: AC230V~50Hz(for EU)
AC120V~60Hz(for US)
: DC9V, 300mA
: DC1.2, 400mA (2/3AAA) * 5EA
: 0 ~ 40˚C, 10 ~ 80%
9 LCD
9 Panel
9 Need Power
9 Kind
9 External form size
: 32mm
: DC5V
: 8 * 2 Character
: 65W * 22H * 120D (mm)
11 Construction
< TV Link Loader >
< Program CD >
< DC 9V Adapter (For EU)>
< DC 9V Adapter (For US)>
< User’s Manual >
< RS232toRJ12 Cable >

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 21
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:ae063a0e-8ed8-418f-958d-51212a235cd3
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2005:10:31 13:19:33+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2005:10:31 13:20:12+09:00
Metadata Date                   : 2005:10:31 13:20:12+09:00
Document ID                     : uuid:8e8a66a6-4a7d-4eca-bc8d-1ea1b6b62a50
Format                          : application/pdf
Title                           : Microsoft Word - User_s Manual_H_.doc
Creator                         : choi
Author                          : choi

EXIF Metadata provided by EXIF.tools