KINGTA TECHNOLOGY P10 Bluetooth speaker User Manual

KINGTA TECHNOLOGY CO., LTD Bluetooth speaker

User manual

User ManualProduct Name: Bluetooth speakerModel: P10,P16Manufacture: KINGTA TECHNOLOGY CO., LTD
P10IntroductionThank you for choosing the P10 as your source fore n t e r t a i n m e n t ! you can use this item with iPads ,iPhones,iPods and many types of smartphone to streammusic ,and enjoy handsfree calling.In order to get the bestresults when using the device,please read this manual firstbefore using.
Description:
1.ON/OFF /Play/Pause/Phone button2.multiple point button3.Previous/Volume –4.Next/Volume +5.Bluetooth LED6.MIC7.Micro USB Charging Port8.AUX in PortIncluded:1.Speaker2.USB Micro Charging Cable3.3.5 mm Audio Cable4.User Manual
SpecificationsSupported Profiles: A2DP, HFP, AVRCP,HSPBluetooth Range: 33ft (10m)Dimensions: 120 mm x 120 mm x 60mmBattery: Li-Ion 3.7V, 2400 mAhCharging: DC5V±0.5/650mAWeight: 412gOperationPowering OnPress and Hold " " button 2 seconds to power ON .Powering OffPress and Hold " " button 2 seconds to power off .Begin Streaming MusicPress “ ” to start playing musicPress and Hold “ ” 2 seconds to play the next trackPress and Hold “ ” 2 seconds to play previous trackPress either “ ” or “ ” for volume control
Making and Receiving Phone CallsWhen the unit is connected and paired to your device,the unit allows you to make or receive phone calls with itsbuilt-in microphone.Press “ ” to accept a callTo end a call press “ ”Bluetooth ModePairingIn order to pair your Bluetooth audio device to yourBluetooth Speaker for the first time, follow the stepsbelow:1. Make sure your Bluetooth audio source is held withinten meters of your speaker.2. Press and hold “ “to power on the BluetoothSpeaker, “ “ LED will be blink to indicate shaveentered pairing status.3. Go to the Bluetooth Manager of your Bluetooth audiosource. Please refer to the User’s Manual of yourBluetooth audio source for more information.4. Search Bluetooth devices and select “P10”
5. Once paired, the “ “ will be solid and you can useyour speaker to listen to audio from you Bluetoothsound source.*** P10 support reconnection functionNote: Bluetooth Timeout :10 minutesAux-In ModePlug in the supplied 3.5 mm cable into the unit. The otherend is connected to your device. The unit willautomatically enter the Aux-In Mode .Please note music and volume can be controlled by yourdevice.Bluetooth DisconnectionWhen the unit is connected and paired to your device,press and hole " “ to disconnect the Bluetooth Mode
ChargingAttach the USB cable to the unit, and plug into any USBcharger. If the unit is completely discharged, it will takeapproximately 4 hours to fully charge.Note:There will be a beep when the battery is low andneeds to be recharged.These three key lights will beslow lighting alternating whencharging , They will stop andkeep lighting once fullycharging .
Multiple point function ( TWS Wireless StereoMode )If you have two pieces P10, you can use TWS to achievewireless stereo combined playing music.1、Make sure two P10 is without any Bluetoothconnection.2、Power on both speakers, and press “ “button onone of the speaker, the two speakers will connectautomatically with separate tone. When” ”LED blink onthe one speaker and “ “keeps solidon the other one, it means the TWS connection issuccessful.3、Then you can search Bluetooth Device and select“P10”.4、Bluetooth DisconnectionPress and Hold “ ” 2 seconds to disconnect theBluetooth Mode.5、Press and Hold " " button 2 seconds on one ofthe units , both units will be power off
TroubleshootingUnit doesn’t connect to deviceSpeaker needs to beconnected/re-paired to deviceA tone is heard every fewsecondsSpeaker needs to be chargedUnit will not power on Speaker needs to be chargedUnit doesn’t controltrack(s)/volumeSpeaker needs to be inBluetooth mode for fullcontrolUnit distorts athigh volumeThe devices’ volume needs tobe lowered
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu