KINGTA TECHNOLOGY PB252B Bluetooth Speaker User Manual
KINGTA TECHNOLOGY CO., LTD Bluetooth Speaker
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3238991 |
| Application ID | 0BIT8+//6tm6f4NqcwrGFg== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 77.8kB (972560 bits) |
| Date Submitted | 2016-12-24 00:00:00 |
| Date Available | 2016-12-24 00:00:00 |
| Creation Date | 2016-12-23 18:06:53 |
| Producing Software | Adobe Acrobat Pro 11.0.12 |
| Document Lastmod | 2016-12-23 18:06:53 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat Pro 11.0.12 |
Bluetooth Speaker User’s Manual 1.ON/OFF /Play/Pause/Phone button Begin Streaming Music 2.Previous/Volume – Press ” ” to start playing music Press and Hold ” ” 2 seconds to play the next track Press and Hold ” ” 2 seconds to play previous track Press either ” ” or ” ” for volume control 3.Next/Volume + 4.Blue LED(Bluetooth) / Red LED(Charging) 5.MIC 6.Micro USB Charging Port / AUX in Port Included: 1.Speaker 2.USB Micro Charging Cable 3.3.5 mm Audio Cable 4.User Manual Specifications: PB252B Introduction: Thank you for choosing the PB252B as your source for entertainment! you can use this item with iPads , iPhones,iPods and many types of smartphone to stream music ,and enjoy handsfree calling.In order to get the best results when using the device,please read this manual first before using. Description: Supported Profiles: A2DP, HFP, AVRCP Bluetooth Range:33ft (10m) Dimensions: 185 mm x 25 mm x 82 mm Battery: Li-Ion 3.7V, 2000 mAh Charging: DC 5V @ 500 mA Weight: 320g Operation: Powering On Press and Hold "ON/OFF" button 2 seconds to power ON, the Blue LED will start to rapid blink . If an Aux (3.5 mm) cable is connected to the unit, the Blue LED will slow blink, the unit is in Aux-In mode. Powering Off Paired mode:Press and Hold "ON/OFF" button 2 seconds to disconnect the Bluetooth, then Press and Hold "ON/OFF" button again to power off . Pairing/AUX mode:Press and Hold "ON/OFF" button 2 seconds to power off Bluetooth Mode Pairing The unit will automatically go into “Pairing Mode” when it is powered ON. Go into your Bluetooth device settings menu and look for “PB252B”. After the unit has paired and connected, it will re-connect automatically when the unit is powered on and the device is in range. Note: Bluetooth Timeout :10 minutes Making and Receiving Phone Calls When the unit is connected and paired to your device, the unit allows you to make or receive phone calls with its built-in microphone. Press “ ” to accept a call To end a call press ” ” To reject a call, press and hold ” ” for 2 seconds Aux-In Mode Plug in the supplied 3.5 mm cable into the unit. The other end is connected to your device. the Blue LED will slow blink when in “Aux”mode. Please note music and volume can be controlled by your device. Charging Attach the USB cable to the unit, and plug into any USB charger. If the unit is completely discharged, it will take approximately 3 hours to fully charge. The Red LED will illuminate during charging, when it has completed, the Red LED will turn off. Note: There will be a beep when the battery is low and needs to be recharged. LED Status Blue LED rapid blink & Blue LED solid Bluetooth Mode Blue LED slow blink Aux Mode Red LED Charging Troubleshooting Unit doesn’t connect to device Speaker needs to be connected/ re-paired to device A tone is heard every few seconds Speaker needs to be charged Unit will not power on Speaker needs to be charged Unit doesn’t control track(s)/volume Speaker needs to be in Bluetooth mode for full control Unit distorts at high volume The devices’ volume needs to be lowered FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:12:23 18:06:53+08:00 Creator : Adobe Acrobat Pro 11.0.12 Modify Date : 2016:12:23 18:06:53+08:00 Title : XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:12:23 18:06:53+08:00 Creator Tool : Adobe Acrobat Pro 11.0.12 Format : application/pdf Document ID : uuid:8e595615-41f9-4a90-8b29-32b69a3a91af Instance ID : uuid:94f7e952-57af-488b-893e-a9824144dc42 Producer : Adobe Acrobat Pro 11.0.12 Page Count : 2 For : Administrator, Bounding Box : 17 -299 784 257 Container Version : 11 Creator Version : 16EXIF Metadata provided by EXIF.tools