KMTEL SP-100T Smart Pointer- Transmitter User Manual QMTSP 100T manual

Download:
Mirror Download [FCC.gov]
Document ID	276058
Application ID	1TlM0rh4t/xb8LNN4e6JUw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.05kB (238171 bits)
Date Submitted	2002-10-10 00:00:00
Date Available	2002-10-10 00:00:00
Creation Date	2002-10-10 13:23:17
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	QMTSP-100T_manual
Document Creator	Microsoft PowerPoint
Document Author:	mkuo

The Smart Pointer guarantees
the easiest and most effective way
to a better presentation
General Description
To make it your presentation better, the Smart Pointer integrates the functions of a
page up/down and a laser pointer. The Smart Pointer’s compact and complete design
gives you the easy control of presentation slide up/down and mobility needed to
concentrate on your presentation at a range of over 20m. Any software and PC
programming is not required and a few second is taken for installation to use.
Terms and Explanations
Transmitter
Receiver
Laser Hole
LED Indicator
Laser Button
Up Button
Down Button
USB connector
Lock/Unlock
Switch
Battery
Cover
Laser Button (R) : Laser on/off control
Up Button (5): Slide up control
Down Button (6): Slide down control
Lock/Unlock Switch : To change battery
Clip : To fix the transmitter to the bag or cloth
Clip
LED Indicator
Blinking : Connected and waiting for ID
Off : ID received and waiting for CMD
Off-On-Off : Everytime CMD received
Key Features
♦ Plug and play function
- No PC programming and S/W
♦ Working on any computer
- On any computer using a USB port
♦ Remote control range within 15m with a very low power
– Eliminates LOS problems encountered with IR systems
♦ Transmitter identification
- Use thousands of ID number to avoid multi-user interferences
Installation and Usage
USB port
Desktop or Notebook PC
When you plug a receiver into a USB port, you will see LED indicator
is blinking.
Push a either down (6 ) or up (5 ) button in the transmitter to implant user ID.
When ID is set, LED goes to command waiting state.
Begin your presentation.
For Only WIN98 Users
Battery Change
Unlock switch
Rotate clip
Push battery cover
Technical Specifications
Laser Pointer with Mouse
Control (Transmitter)
Radio Frequency
Laser Module
Wireless Mouse Control
Interface (Receiver)
315 MHz (USA, Asia), 433.92 MHz (Europe)
Wavelength: 670nm (Class IIIa)
Output Power: 2.5± 0.5mW
Interface
USB HID Spec., Ver.1.1
Supported OS
Win98/SE/Me/2000/XP,
Mac, Linux, WinCE
Battery
Alkaline, 12V/23A
USB Bus-powered
Operating Current
40mA (LM), 15 mA (RF)
10 ~ 12 mA
Enclosure
Dimension
Weight
Molded plastic (violet, silver, gray, ordered colors)
115mm(L) × 18mm(H) × 19mm(W) 65mm(L) × 7mm(H) × 20mm(W)
20 grams (w/o battery)
10 grams
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to
try to correct the interference by one or more of the following measure:
- Reorient or relocated the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Shielded cables must be used to comply with FCC regulations.
WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 6
Creator                         : Microsoft PowerPoint
Create Date                     : 2002:10:10 13:23:17
Title                           : QMTSP-100T_manual
Author                          : mkuo
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools