KOKKIA IADAPTER-X BLUETOOTH UNIVERSAL ADAPTER User Manual Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	2145804
Application ID	nWPnapsT2IgJJcMJpGzoLA==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.7kB (271248 bits)
Date Submitted	2013-12-18 00:00:00
Date Available	2013-12-18 00:00:00
Creation Date	2013-11-13 17:43:38
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-11-13 17:43:38
Document Title	Quick Start Guide
Document Creator	Microsoft® Word 2010
Document Author:	George J Dunlop

English
www.kokkia.com
iAdapter Tiny Bluetooth
Universal 3.5mm Audio
Stereo Transceiver with aptX®
3.5mm
Audio Jack
Button
Battery
Charging Port
LED indicator.
Green: Transmitter
Blue: Receiver
Red: Charging
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications to device will void the user’s
authority to operate the device.
この機器の使用周波数帯では、電子レンジ等の産業・科学
・医療用機器のほか工場の製造ライン等で使用されてい
る移動体識別用の構内無線局（免許を要する無線局）及び
特定小電力無線局（免許を要しない無線局）並びにアマチ
ュア無線局（免許を要する無線局）が運用されています。
１ この機器を使用する前に、近くで移動体識別用の構内
無線局及び特定小電力無線局並びにアマチュア無線局が
運用されていないことを確認して下さい。
２ 万一、この機器から移動体識別用の構内無線局に対し
て有害な電波干渉の事例が発生した場合には、速やかに使
用周波数を変更するか又は電波の発射を停止した上、下記
連絡先にご連絡頂き、混信回避のための処置等(例えば、パ
ーティションの設置など)についてご相談して下さい。
３ その他、この機器から移動体識別用の特定小電力無線
局あるいはアマチュア無線局に対して有害な電波干渉の
事例が発生した場合など何かお困りのことが起きたとき
は、次の連絡先へお問い合わせ下さい。
連絡先：info@kokkia.com
CE 1588. FCC ID: XWA-IADAPTER-X


iAdapter TRANSCEIVER can be used as either a Bluetooth
Stereo Transmitter or Bluetooth Stereo Receiver.
Transmitter Mode: LED is GREEN Color.

Receiver Mode: LED is BLUE Color.
In aptX streaming, LED double quick flash once ~5secs.
In non aptX streaming, LED single quick flash once ~5secs.
Select “KOKKIA iAdapter” on phone.
Enter pin code ‘0000’ on your Bluetooth
Cell-Phone/Transmitter, if prompted, to pair and connect
iAdapter to your phone/transmitter.
When iAdapter and Cell-Phone or Transmitter are paired
and connected (iAdapter BLUE LED slow flashes every
~5 seconds), insert iAdapter’s audio jack into your audio
device’s audio input socket. Play the audio on your
Cell-Phone or Transmitting device, and it will stream to
iAdapter wirelessly to audio input device connected to
iAdapter.
Mode Change ( Transmitter  Receiver )

Press and HOLD Button for ~15 seconds, until LED
iAdapter Remote control (Transmitter Mode)
changes color, GREEN  BLUE.

Play/Pause, Next Track, Previous Track: iAdapter
Specifications
responds to these four remote AVRCP commands from

Operating distance up to 10 meters (33feet).
your stereo receiver / headset / speaker. Your music

Pin-Code. Receiver Mode: ‘0000’.
device or smartphone may (or may not) respond to all or
Transmitter Mode: ‘0000’, ‘1111’, ‘1234’ or ‘8888’.
some of these remote AVRCP commands.

Works only with Bluetooth stereo devices with
iAdapter Remote control (Receiver Mode)
A2DP/AVRCP profiles.

Play/Pause: Single Quick Press Release Button
Charging the iAdapter

Next Track: Double Quick Press Release Button

Previous Track: Triple Quick Press Release Button

Plug USB charging cable into iAdapter USB port.

Plug other end of USB charging cable into a powered
Powering ON iAdapter to connect to previously paired
USB 5V port. When charging, RED LED will be lit.
device

RED LED turns off when unit is charged (~2 hours).

Press Button until LED lights up. Release button.
NOTE: iAdapter resets when charging cable with 5V Powering OFF iAdapter
power is inserted into iAdapter.

Press Button for ~5 seconds, LED turns on for ~1 second
and then turns off. iAdapter powers down. Release Button.
Pairing iAdapter (Transmitter) to Bluetooth Stereo Receiver

Turn off all previously paired Bluetooth devices to your POWER ON mode, cable inserted to iAdapter with 5V
receiver, and iAdapter.
POWER ON mode is for use cases with charger cable inserted

Turn on and put in pairing mode, the Bluetooth stereo in iAdapter, and charger cable is attached to 5V power that is
receiver you wish to pair with iAdapter and place it within powered on/off together with other audio/video devices.
10 meters of iAdapter. (Refer to the Bluetooth stereo With POWER ON mode, whenever there is 5V applied to
receiver’s user guide for pairing instructions)
iAdapter from charging cable, iAdapter will turn on and connect

Press and hold the iAdapter Button, until the GREEN
LED lights up. Release the button press when GREEN to a previously paired device, without pressing iAdapter button.
Enabling POWER ON mode:
LED turns on, indicating iAdapter is in pairing/connecting 
When iAdapter is in charging mode (USB cable is inserted
mode.
and powered with 5V), double quick press and release the

When iAdapter and stereo receiver are paired and
button, the GREEN or BLUE LED turns on. iAdapter will
connected (iAdapter GREEN LED slow flashes every ~5
re-connect to a previously paired device.
seconds), insert iAdapter’s audio jack into your audio
When 5V power is removed from iAdapter charging
device’s audio output socket. Play the audio device’s
cable, and 5V is later restored to the cable, iAdapter will
audio, and it will stream from iAdapter to the connected
automatically turn on, re-connect to a previously paired
receiver wirelessly.
device, without pressing iAdapter button.
Disabling POWER ON mode:
Pairing iAdapter (Receiver) to Bluetooth Cell-Phone or 
When iAdapter is in charging mode (USB cable is inserted
Transmitter
and powered with 5V), and GREEN or BLUE LED is

Turn off all previously paired Bluetooth devices to your
flashing, press the button until the GREEN or BLUE LED
Cell-Phone or Transmitter, and iAdapter.
turns OFF, then release button press.

Turn on and put in pairing mode, the Bluetooth
When the 5V power is removed from iAdapter charging
Cell-Phone/Transmitter you wish to pair with iAdapter
cable, and 5V power is later restored to the cable, iAdapter
and place it within 10 meters of iAdapter. (Refer to the
will NOT automatically turn on.
Bluetooth Cell-Phone or Transmitter user guide for
Use button as described earlier to operate iAdapter.
pairing instructions)

Press and hold iAdapter Button, until the BLUE LED
lights up. Release the button press when BLUE LED turns
on, indicating iAdapter is in pairing/connecting mode.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Quick Start Guide
Author                          : George J Dunlop
Subject                         : PMR Tiny Bluetooth Headset
Keywords                        : PMR, Bluetooth, Headset, Nolan, Tiny, HS
Creator                         : Microsoft® Word 2010
Create Date                     : 2013:11:13 17:43:38-08:00
Modify Date                     : 2013:11:13 17:43:38-08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools