KYE SYSTEMS GEPEN User Manual 70501

Download:
Mirror Download [FCC.gov]
Document ID	70501
Application ID	nCLN8V9eNYNeQ13BelTj/Q==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	70.7kB (883796 bits)
Date Submitted	1999-11-17 00:00:00
Date Available	1998-10-05 00:00:00
Creation Date	2001-05-15 23:18:19
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-05-15 23:18:34
Document Title	70501.pdf
Document Author:	VicodinES /CB /TNN

FCC ID : FSUGEFEN
EUT : TABLET
KEY SYSTEMS CORP .
USER ' S MANUAL
FcchELLoN
IBIT D
Readme
Using the Genius Tablet Software
CONTENT ==
windows Software Installation
Setup Modifications
Tablet Uninstallation
AutoCAD /ADI Installation
1.
2.
3.
4.
= l. WINDOWS SOFTWARE INSTALLATION
1) Connect the Genius tablet to your computer.
2) Turn on your computer, Windows NT/95/3.x will start,
3] Insert the backup copy of your tablet diskette to floppy drive A:
( or B: ).
4) Select Run under the Start button ( for Windows NT4.X or 95 ) or fr
the Program Manager/File Manager ( for Windows NT3.5x or Windows 3.
Type A:\SETUP ( or B:\SETUP } and click OK.
or
Find A:\setup4exe ( or B:\setup.exe ) in My Computer or Windows
Explorer and double click ( for windows NT4.x or 95 ).
Follow the instructions on the screen.
5) Restart Windows to activate your tablet.
2. SETUP MODIFICATIONS
The windows setup procedure expands the following files from the tablet
diskette to the system.
——— WINDOWS NT SETUP MODIFICATIONS -——
Page 1
Readme
2) files copied to the WIN31 subdirectory:
gtablet.ini (ini file
3) Some files about help and readme copied to the destination directory
(ie. C:\gtab31)
4) Some files necessary for tablet uninstallation are copied to the
"destination directory\\uninst" (ie. C:\gtab31\uninst)
uninst.exe (tablet uninstall execute file)
:3_ Tablet Uninstallation =
The uninstall program will remove all tablet driver files.
——— Uninstall tablet from windows NT3.5x /windows 3.x ——-
Setp 1. Select Genius Tablet group in Program Manager\startup.
Step 2. Double Click on the "Uninstall Genius Tablet" item.
——— Uninstall tablet from windows NT4.x /Windows 95———
Method 1:
click on the Add/Remove Programs icon in the Windows NT4.x/95 Contr
01 ,
Panel, then select "Uninstall Genius Tablet“ and press the Remove b
utton.
Method 2:
Click the Start button and select Programs. Then select Genius Tabl
et
and double click on "Uninstall Genius Tablet".
4." AutoCAD /ADI Installation
* This is a protected—mode *DOS* driver for AutoCAD/386 for DOS.
This driver is NOT necessary if you are using AutoCAD for Windows
Release 12 or 13. This AutoCAD DOS driver is compatible with ADI
version 4.2 (AutoDesk Device Interface).
To begin the ADI installation:
1) Go to the \ADI directory and copy all the files there to an empty
floppy disk. Then change to that disk (A1) and type the following:
Page 3
About Genius Tablet
Genius Tablet is a graphics tablet used to create or reproduce diagrams, drawings, building layouts, maps, etc. You
can then save these graphics into your computer for other uses.
Using this tablet, you can:
- Trace anything; pictures, drawings, photos, maps, etcr
- Draw freehand; achieve precision and accuracy
- Move the puck (or stylus) to select commands on the template, or move objects on the screen
- Create a symbol library for your most afien used symbols using AutoCAD
General Information
The Information Folder has geneml informalion about the Genius Tablet such as version, corporation name, etcr
Use the Button Assignment Function
The Button Assignment function allows you to change the function oithc buttons on your pointing device, Select
which pointing device you are usmg from the Pointing Device list, This would allow you to change the functions
assigned to the different buttons on that device. Simply pick the button in the Assignment area that corresponds to
the pointing device button you wish to change and then select from the function list the function you wish to assign
to that button, You can set the function of your button as Left Click, Right Click, Middle Double Click, Copy, etc.
Gen 5 Tablet Properties
——c
Pressure
For the WiurdPnd, you can use the Pressure folder in the Genius Tablet Control Panel.
Ifyou want to adjust the pressure, click "Customize in Pressure Mode area", then you can customize the feel of
your pressure-sensitive pen by setting these options.
Threshold allows you to define how hard you have to press on the tip of the pen before it "reads“ a "click," and the
function assigned to it is executed. The threshold can be set from 0 to 255.
Pressure Response allows you to set how soft or firm the pen feels when drawmg. The pen is harder when you
increase the number.
The Test Area is a small pressure-sensitive drawing area that allows you to test how the pen reacts to the options in
the control panel. You can click on "clear“ to clear the area.
Genius Tablet Prupe as
am ‘
Test Yuur Buttons
In this am you can xsrll'y lhll ul'_\our pointing device buttons are operating properly. Move your palnllng device
around Ill: tablet and press {he bullons (and the pen lipsifusing a stylus). You will see lhe positlon ofthe cursor on
the screen in th: Model Name area. and the human ln this area will flash to respond to me button presses, When
you move your puck in lhe rest area on the right side , you will see lmils rcmaln responding your bunon‘s
movement. Click on "clear" [0 clear (his arm
Genius Fable! E'mpaliu
ll GerfiszzmdPad ;
. Using Sgrial Port" mm
Adjust Working Area
The default option lS the Whole Tablet.
When the Tracking Mode in the Basic folder is Absolute, you can define the tracking area as your require, This is
especially useful ltyou have a large tablet and you wzmt to define a smaller active area so you don‘t have to move
the pointing device around so far on the tablet.
In order to set the tracking area:
1) Choose the Preserve Aspect.
2) Click on the Define button then the define area will turn grey.
3) Click on any button in the define area, drag the puck, then click the button again. The area will be defined, Some
information ahnut the defined area such as Top, Bottom‘ Right, Left, Width, Height will appear in the Area
Information. You can change the units from inch to centimeters. lfyou change it ,the number information will
also he changed.
You can input the number of Lefi, Top, Right. Bottom, Width and Height or click on these up-down controls in the
Area lnfdrmation as you require. then the working area will be defined.
Changing the l'ablct Orientation
t- zmrmttl operating position (With
Orientation allows you to mtute the (‘ blet 91) degrees. Landscape H; m 00
the tahlet‘s mtut-t’nc; cnules exiting (ht: top ot the tahlet) Selecting Pom-mt Allows you to mate tltc ta ct
l)5it1unlsotltet.lblcl' interface c ‘lcs would or c‘hlllll! mm the
‘pcnriut orientation it you pret’crt .our Mblc‘t in «i te
deztees clock" tsc "tom the normal operattlv
‘ thand sale ot'ilte taoluti Tr; citnttgn
mutton. ‘tke a typical sketch pad
Double~Clic Test
In the DouhIe~Click Test Box. you can set the widest and highest distance between the two points ot’doubie click
and you can set the speed ofdouhle cltck by dragging the pointer on the slider box or cltc.\ g on the slider bar.
Then test the speed in the "Smiling" areal
Benin: Table! Properties
Orientation , » t
Tablet intomatiori
f Tablet Width
“Mama“ 5.“ .u
Tracking Mode
The Exciting Mode function allows you to switch how the Genius Tablet moves the screen cursort
The Absolute tracking mode is the normal (default) tablet mode, ln absolute mode the screen is directly mapped to
the tablet's active area. In this mode, the lower left comer ofthe tablet's active area corresponds (0 the lower left
corner of the screen, the upper right comer on the tablet corresponds to the upper right comer ofthe screen, etc,
When you place a pointing device on the tablets the screen cursor wouldjump to the location on the screen that
directly corresponds to the position on the tablet. You'll notice that you don‘t have to "tow” the cursor (e pick up
and move over and move again) like you often have to do with a conventional mouse
On the other hand‘ in Relative tracking mode you move the screen cursorjust like you would with a mouse ln
relative mode it’s possible to find yourselfwirh the screen cursor at one side ot‘the screen, while your pointing
device is at the opposite Side of the tablet, In that case, you would have to pick up and move your pointing device
just like you would do with a mouse. You can set the Relative Resolution in [llIS area by Clicking the bar, The
resolution means the number ot'pixel in an inch. The resolution is higher on the right side than on the left side,
Tablet Information
You can see the width anei might otthc tablet in this area.
Adjust the Resolution in Absolute Made
Readme
INSTALL
2) Then follow the install screens tc install the Mouse/Tab E1: drive:
- AutoCAD Release 10, 11, 12, or late: DOS—based AutoCMD versions.
Page 4
Readme
Here the WZVNT directory means where the subdirectory of WINDOWS NT is
installedi
1) Files copied to the WINNT\SYSTEM32\DRIVERS subdirectory:
gtabpo:t.sys (driver file
2) Files copied to the WINNT\SYSTEM32 subdirectoxy:
gtablet.cpl (cpl file for Genius Tablet Control Panel)
3) Some files about help and readme are copied to this destination dire
ctcry
(ie. C: \gtabnt]
4] Some files necessary for the tablet uninstallation to the ”destinati
GT!
directory\\unirst" (iei C:\gtabnt\unin
uninst.exe (table: uninstall execu
sU
te file)
——7WINDOWS 95 SETUP MODIFICATIONS-——
Here the WIN95 directcry means where the subdirectory of WINDOWS 95 is
installed.
'\SYSTEM subdirectcry:
driver )
for Genius Tablet Ccntrcl Eanen
1) Files copied to the w
td.vxd F
J._€‘
2} Some files about help and readme are copied to the des:inati:n dire:
tzry
(ie. c:\3 “5951
the
the tablet uninstsllation are
3) Some files necess
uninst“ (ie. C:\gtab95\uninsw
ostall execute file
"destin ectory\\
uninst.e e xcable: uni
-77WINDCWS 3.x SE CF MOD
CATICNSff—
Here the WIN31 directory means where the subdir-ctcry of WINDOWS 3‘x is
installed.
1) Files copied to the WIN31\SYSTEM subdirector
gtablettdrv (driver file)
gtablet.cpl (cpl fi‘ for Genius Tablet Control Panel)
wintab.dll (dll file
wintab32.dll (dll file
Page 2
I EXHIBIT
FEDERAL COMMUNICATIONS COMMISSION
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications However, there is no
guarantee that interference will not occur in a particular installation Ifthis equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient o relocate the receiving antenna.
-lncrease the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:05:15 23:18:19
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : VicodinES /CB /TNN
Title                           : 70501.pdf
Modify Date                     : 2001:05:15 23:18:34-04:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools