KYE SYSTEMS GG000A 2.4GHz PS2 GAME PAD User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	632110
Application ID	a8TPkQDjTOskr0utkxQ2eQ==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	35.47kB (443436 bits)
Date Submitted	2006-02-28 00:00:00
Date Available	2006-02-24 00:00:00
Creation Date	2005-08-18 15:55:41
Producing Software	Adobe PDF library 5.00
Document Lastmod	2006-02-14 11:34:42
Document Title	users manual
Document Creator	Adobe Illustrator 10.0

Wireless PS2 Controller
FEATURE
This Wireless controller uses state of the art technology for a better gaming experience. The technology used in this
controller allows up to 16 players to use these controllers in one area. The ergonomically designed grips combine
functionality as well as comfort. The use of 2 AA batteries(not included)allows for up to 70 hours of play time depending on
the use of the vibration control switch. In most cases the software used for game play will dictate the functions of the
controller buttons. See 'Controller Setup' in the software game menu. Prior to using the controller, you should move the
Analog Sticks in a circular motion.
1. State Of The Art2.4GHz Technology Allows Up To 16 Players
2. Ergonomic Analog Sticks & Directional Pad For Superior Control
3. Uses 2 AA Batteries(Not Included) For Up TO 70 Hours Of Play Time
4. Rubberized Grips For Comfortable Handling
5. Auto-Detect Feature For Simplified Set Up
6. Digital and Analog Modes
7.Turbo Function For Rapid Fire
INSTRUCTION
1.Remove the battery cover on the back of the controller and insert 2AA batteries, Replace the cover.
2.Plug the receiver into one of the PS2 controller ports of PS2 console
3.If the LED on the receiver does not automatically begin flashing, press the connect button on the receiver. The red LED
should now be flashing. This indicates that it is searching for a controller to connect to .
4.Turn the controller on using the on/off switch on the the controller.
5.If the LED on the controller is off or flashing, Press the connect button on the controller. If it automatically turns on
,proceed to next step.
6.The controller and receiver should be connected now. The red LED on the controller should be on ,and the red LED on the
receiver should have stopped flashing and should be on .You are now ready to play. Repeat the above procedure for each
Plug only one receiver into the Ps2 console. Follow the procedure above for connecting that controller. Then plug the
second receiver into the Ps2 console and follow the procedure above for connecting that controller. Continue connecting
them one at a time until all your controllers are connected. You may use up to 16 of these controllers in one area without
interfering with each other.
TURBO&CLEAR FUNCTIONS: Use the Turbo function for auto repeat(auto fire). When activated, this will cause the selected
button to repeat its function until you release the button .
TO SET AN ACTION BUTTON TO TURBO: Press and hold the TURBO button. Press and release any action buttons you want
to put into Turbo mode. Release the TURBO button.
TO CLEAR THE TURBO FUNCTION FROM AN ACTION BUTTON: Press and hold the Turbo button. Press and release any
action buttons you wish to clear. Release the Turbo button. The action buttons you pressed will now return to their original
function.
MODE BUTTON&LED INDICATOR: Use to change mode selection (digital or analog). The LED indicator will illuminate in
analog mode, and will not illuminate in digital mode.
DIGITAL MODE: In this mode the controller acts like the origial Sony controller for PlayStation. The analog Sticks will
fuction the same as the Directional Pad. The R3&L3 buttons are not active.
ANALOG MODE: In this mode, you will have more accurate control over your movement.
The following button will be active: Right&Left Analog Sticks, X, , , . Directional Pad&R1, R2, L1, L2. The R3&L3
analog Sticks are also functional. To activate, press down on them until you feel a click.
LOW POWER: Battery power lower, the POWER LED is blinking.
MACRO&CLEAR FUNCTION: Use to macro and create a sequence of movements with the touch of one button. During game
play, pressing the macro button will activate our selected sequence.
TO SET AN ACTION BUTTON TO MACRO: Press the MACRO button. Then press the button(one of R1,R2,L1orL2) you want
to put into Macro mode on the controller to be macro. Once you have completed the sequence desired, press the MACRO
button again to set. (You can set X , , , ,L1,L2,L3,R1,R2,R3,D-PAD to macro mode)
Note: Each macro can up to 16 steps of key or spaces, Spaces are put in by pressing SELECT button. If all 16 commands
are used, macro function will end automatically.
TO CLEAR MACRO FUNCTION FROM AN ACTION BUTTON: Press the Macro button. Press any action buttons you want to
cancel the Macro function. Press the Macro button again. The action buttons you pressed will now return to their original
function.
SLEEP MODE: Sleep Mode is smart feature for saving battery life. If the Controller is left alone without movement for 2
minutes, It enters sleep mode. If you want to continue play, press on any key. This feature allows player to save battery life
if you forget to turn off the power switch.
NOTE: You should always refer to the software in use for the suggested mode for play. In some instances, the software
may automatically change to the correct mode and you may not be able to change this. The function of the buttons can
change and/or be non-functional depending on the mode selected.
TROUBLESHOOTING
If you turn a controller off and on ,or unplug a receiver you may lose the connection between that controller and receiver. If
you have lost the connection, unplug the receiver and turn off the controller. Plug the receiver in and press the connect
button on the receiver. Turn the controller on, and if necessary, press the connect button on the controller. Whenever you are
trying to connect a receiver and controller, unplug the receiver and turn off the controller and follow the steps outlined above
in Setup for each controller.
WARNING
Read, follow & understand all warnings in this manual, your video game system instruction manual & video software for
safety, health & other information
Do not submerge in water
Do not disassemble any part of controller & receiver
Do not place heavy objects on top of controller & receiver
Do not allow small children to play with controller & receiver unsupervised
Do not use this controller in any other way than its intended use
Do not unplug controller cable while the console is turned on
Keep away from areas where dirt or liquid can get into controller & receiver
Keep away from extreme temperatures
Store in areas away from dust and humidity
Turn off or discontinue use of Vibration function if you have any hand or wrist ailments or if you have any injury's to which
the vibration creates discomfort to you in any way
Connect Button
Connect LED
Power LED
L2 Button
L1 Button
Connect
Macro
R1 Button
Turbo
Button
Select
Button
Directional
Pad
Analog
Button
Button
Power LED
L Analog Stick
R2 Button
Power&Vibration
Control Switch
Start
R Analog Stick
Federal Communications Commission (FCC) Statement
2.4GHz PS2 GAME PAD
FCC ID: FSUGG000A
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
Reorient the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and
television reception. It is essential that only the supplied power cord be used.
Use only shielded cables to connect I/O devices to this equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:02:14 11:34:42+08:00
Create Date                     : 2005:08:18 15:55:41+08:00
Creator                         : Adobe Illustrator 10.0
Creator Version                 : 10
Container Version               : 9
For                             : MC05, Smart
Title                           : E:\zxh\�ͻ�����\����\2038˵����.ai
Bounding Box                    : -91 139 702 695
Page Count                      : 2
Creation Date                   : 2005:08:18 15:55:41+08:00
Mod Date                        : 2006:02:14 11:34:42+08:00
Producer                        : Adobe PDF library 5.00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2006:02:14 11:34:42+08:00

EXIF Metadata provided by EXIF.tools