KYE SYSTEMS GG000S Bluetooth Stereo Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2303849
Application ID	SnEuJ6sqa+O1qO6DnPnhZg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	55kB (687451 bits)
Date Submitted	2014-06-24 00:00:00
Date Available	2014-06-24 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Adobe PDF library 10.01
Document Lastmod	0000-00-00 00:00:00
Document Title	513-0380-010_HS-920BT说明书_中性_R4
Document Creator	Adobe Illustrator CS6 (Windows)

Table of contents
BLUETOOTH STEREO HEADPHONE
HS-920BT USER MANUAL
1 Introduction
2 Kit Contents
3 Connection Diagram
4 How to use
4.1 General function
4.2 Pairing to mobile phone
4.3 Charging your dev ice
5 Technical specification
6 Service and Support
7 FAQ
USER MANUAL
1. Introduction
USER MANUAL
3.Connection Diagram
Congratulations, and thank you for choosing the Bluetooth
Stereo Headphone. This manual will help you operate the
Bluetooth Stereo Headphone, but you should first
familiarize yourself with the Bluetooth functionality of your
mobile phone or other devices before using the Bluetooth
Stereo Headphone
Safety Rules
1\ Please follow the rules depicted in this manual closely
to ensure your safety. Before using this Bluetooth
Stereo Headphone, we would strongly encourage you
to read
through this user manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
3\ Do not modify, repair or dismantle this Bluetooth
Stereo Headphone. Doing so may result in fires, electric
shocks, complete breakdown of this Bluetooth Stereo
Headphone, etc. All of which, are not covered under
warranty.
4\ Do not use any diluents or volatile liquid to clean the
Bluetooth Stereo Headphone.
5\ Do not use the Bluetooth Stereo Headphone in a
hazardous location.
Previous
Next
Volume down
Turn on/
Enter the pairing mode/
Play / pause/
Turn off /
Answer call/
End call/
Reject call/
Transfer call voice/
Last number redial
MIC
Charging
Next/
Fast forward
Previous/
Fast backward
4.How to use
4.1.General Functions
Required Action
Turn on
Press the “ ” button for 3 seconds when
the device is off. (Red LED slowly flashes
and a tone voice beep)
Enter the pairing
mode
In power off mode Press the “ ” button
and hold on for 6 seconds.(Blue LED and
Red LED quickly flash alternately with two
beep tone voice).
2.Kit Contents
1X Bluetooth Headset
1X USB Charger wire
1X User Manual
Desired Result
Volume up
Desired Result
USER MANUAL
Pairing
In pairing Mode use a Bluetooth function
mobile phone or other Bluetooth Master
Device and to perform pairing action
(detail refer to the chapter about pairing)
Play / pause
Press to play when the device is pausing
and press to pause when the device is
playing.
Volume up
Press
is for volume up
Volume down
Press
is for volume down
Required Action
Press
is for previous music.
Press
is for next music.
Turn off
Press the “ ” button for 3 seconds when
the device is on.(a tone voice beep and
all LED is off)
Low battery warning
The red LED flash
Charging
Plug the charger to port of the device.
(Red LED is on)
Answer call
Press the “ ” button for 1second while
the call coming
End call
Press the “
Transfer call voice
Double click the “ ” button for 2seconds
to transfer the callvoice between the mobile
phone and device when on going call
” button for 1second to end call
Reject call
Press the “ ” button for 2seconds to
reject call when the call is ringing
Fast backward
Double click the “ ” button In the
connected state or there is music
Press the “<”button don’t loose
Fast forward
Press the “>”button don’t loose
Multi-point connection
In pairing mode, short click the “ ” to
enable the multipoint and double click the
“ ” to disable the Multipoint.
Factory reset
Under the pairing mode Long press “ ”
and”-” button for 5 second at the same time .
Last number redial
4.2. Pairing to Mobile phone or other device
To use your Bluetooth Stereo Headphone, you must first pair
your Stereo Headphone with a phone or a computer. Once
your Bluetooth Stereo Headphone is paired to a specific
mobile phone, they will remain paired and automatically
recognize each other whenever they are within range.
USER MANUAL
USER MANUAL
Pairing to a phone and Entertainment:
Turn on your phone and ensure its Bluetooth function
is activated
Turn on the Bluetooth Stereo Headphonego to the paring mode.
Search your Bluetooth devices onyour phone by following the
phone's instructions. Refer to your phone's user manual for
more information.
After a few second the phone will list the device as a discover
device. Select it and follow your phone instruction to select this
pairing.
Then your phone will request a passkey or PIN, enter 0000 as
your PIN or passkey.
Your phone will confirm the pairing, and then press Yes/Ok.
Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
4.3. Charging your device
Pairing to a computer and Entertainment:
If there is no Bluetooth function supported by your computer, a
Bluetooth adapter is necessary. Fix the adapter with your
computer and ensure its Bluetooth function is activated.
Turn on the device go to the paring mode.
Open the Bluetooth software (such as BlueSoleil) installed on
your computer, and selects “Search your Bluetooth devices”
function. Refer to user manual of the Bluetooth software for
more information.
After a few second the “ device name” will list in Bluetooth
software of your computer as a discover device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device”
with same operation.
Open your media player soft to play music, watch TV/move
and play game, then all the sound will be playback on
your device.
5.Technical specification
USER MANUAL
Value
Parameter
The device is convenient to connect to AC charger or a USB
charger with Micro USB port marked with.Make sure that
your device is full charged for at least 6 hours before initial
use. Insert one terminal of your charger to AC main or USB
port of PC and other terminal to Micro USB. While charging,
he red LED light constantly. When charging is completed,
the red LED turns off and blue LED turn on.
THD+N
Talking time
≤1.0%
About 12 hours
Charging Time
About 2.5 hours
Dimension (LxWxH)
156.9×163.5×49mm(H2X)
Weight
135g(H2X)
6.Service and Support
If your device is not performing as it should,please take it to
your local service providers or dealer for service.
Warning:
You must select a qualified charger from a regular
manufacturer.
You must charge the Bluetooth Headset if it has been
not used for more than 12 months.
Value
Parameter
Bluetooth
Specification
Bluetooth 4.0
Bluetooth Profile
A2DP1.2/AVRCP1.4/HSP1.2/HFP1.6
RF Range
10 m
Frequency
Response
80Hz-20KHz
Speaker rated
power
20mW
Signal-To-Noise
≥90dB
7. FAQ
1\ Why is there no power even when the Stereo Headphone
is power on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with
phone or computer, if the connection is not
established, pleasereconnect again. Make sure the
Stereo Headphone device is paired and connected
target phone or other master device.
3\How can I know the Bluetooth Stereo Headphone has
been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
4\Why the headset cannot connect to second phone
Ans: Please set the headset to pairing mode and short press
the “ ” to enable multipoint mode Connect the
headset to phone A, Restart the headset to pairing mode
and connect the Headset to phone B, and then use phone
A paired device list to reconnect to the headset
USER MANUAL
8.FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However,there is no
guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference
to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Adobe PDF library 10.01
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Create Date                     : 2014:06:10 10:00:45+08:00
Metadata Date                   : 2014:06:10 10:00:45+08:00
Modify Date                     : 2014:06:10 10:00:45+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 44
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 6646 bytes, use -b option to extract)
Format                          : application/pdf
Title                           : 513-0380-010_HS-920BT说明书_中性_R4
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 1580.546875
Max Page Size H                 : 327.594238
Max Page Size Unit              : Points
Font Name                       : ArialMT, Arial-BoldMT, SimHei, SimSun
Font Family                     : Arial, Arial, 黑体, 宋体
Font Face                       : Regular, Bold, Regular, Regular
Font Type                       : Open Type, Open Type, TrueType, TrueType
Font Version                    : Version 3.00, Version 3.00, Version 3.02, Version 3.12
Font Composite                  : False, False, False, False
Font File Name                  : ARIAL.TTF, ARIALBD.TTF, simhei.ttf, simsun.ttc
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Document ID                     : xmp.did:6E55230743F0E311B031A93554097F74
Instance ID                     : uuid:c4118056-b5e0-4fe0-b8a1-93711b108f27
Original Document ID            : xmp.did:72FF4F0E4474E3119FA4B1217DAB34B3
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:35b4ee2e-1c9f-47c7-8c15-25a2af5c6ff0
Derived From Document ID        : xmp.did:160121B43FEDE311BC5F8065C2AA56AB
Derived From Original Document ID: xmp.did:72FF4F0E4474E3119FA4B1217DAB34B3
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:72FF4F0E4474E3119FA4B1217DAB34B3, xmp.iid:6E55230743F0E311B031A93554097F74
History When                    : 2014:01:03 17:08:29+08:00, 2014:06:10 10:00:42+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Bounding Box                    : 61 572 1542 823
Container Version               : 11
Creator Version                 : 16
Image Height                    : 251
Image Width                     : 1481
Image Size                      : 1481x251
Megapixels                      : 0.372

EXIF Metadata provided by EXIF.tools