KYE SYSTEMS GMZG7 Wireless Mouse User Manual User s manuel

KYE Systems Corp Wireless Mouse User s manuel

users manual

Wireless MouseUser’s Guide
Quick Start Guide1. Installing the Batteries1. Remove the battery compartment cover.2. Insert batteries.3. Replace cover.Battery Warning!Exercise care when handling batteries. Do not open a battery or mutilate,dispose of in a fire, expose to heat, immerse in water, install improperly, orrecharge. Conducting materials, such as rings, bracelets, and keys, can shortout a battery causing it to overheat and possibly leak or explode. Discard allused batteries according to tlie battery manufacturer's instructions. When youare not using your cordless device for long periods of time, remove thebatteries and store them in a dry place at normal room temperature.2. Connect the Radio Receiver1. Make sure the computer is turned off. Caution: Plugging or unpluggingcables to the computer's PS/2 port while the computer is running candamage the computer.2. Connect the receiver's cable to the computer's PS/2 mouse port.
FCC Compliance and Advisory Statement. This hardware device complies with Part 15 of the FCCRules. Operation is subject to the following two conditions: 1) this device may not cause harmfulinterference, and 2) this device must accept any interference received, including interferencethat may cause undesired operation. This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled or used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures: 1) reorient or relocate thereceiving antenna; 2) increase the separation between the equipment and the receiver; 3)connect the equipment to an outlet on a circuit different from that to connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changesor modifications not expressly approved by the party responsible for compliance could void theuser's authority to operate the equipment. Where shielded interface cables have been providedwith the product or specified additional components or accessories elsewhere defined to beused with the installation of the product, they must be used in order to ensure compliance withFCC regulations.Canadian DOC Statement. This digital device does not exceed the Class B limits for radio noiseemissions from digital apparatus specified in the interference-causing equipment standardentitled "Digital Apparatus." ICES-003 of the Department of Communications.Cet appareil numerique respecte les limites bruits radioelectriques applicables aux appareilsnumeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "AppareilsNumeriques," NMB-003 edictee par le Ministere des Communications.This device complies with RSS-210 of Industry and Science Canada. Operation is subject to thefollowing two conditions: 1) this device may not cause interference, and 2) this device mustaccept any interference, including interference that may cause undesired operation of thedevice. Transmitter frequency: 26.995; 27.045; 27.145; 27.195 MHz. Power Output: < lOmV/m @3m.

Navigation menu