KYE SYSTEMS GMZG7 Wireless Mouse User Manual User s manuel
KYE Systems Corp Wireless Mouse User s manuel
users manual
Wireless Mouse
User’s Guide
Quick Start Guide
1. Installing the Batteries
1. Remove the battery compartment cover.
2. Insert batteries.
3. Replace cover.
Battery Warning!
Exercise care when handling batteries. Do not open a battery or mutilate,
dispose of in a fire, expose to heat, immerse in water, install improperly, or
recharge. Conducting materials, such as rings, bracelets, and keys, can short
out a battery causing it to overheat and possibly leak or explode. Discard all
used batteries according to tlie battery manufacturer's instructions. When you
are not using your cordless device for long periods of time, remove the
batteries and store them in a dry place at normal room temperature.
2. Connect the Radio Receiver
1. Make sure the computer is turned off. Caution: Plugging or unplugging
cables to the computer's PS/2 port while the computer is running can
damage the computer.
2. Connect the receiver's cable to the computer's PS/2 mouse port.
FCC Compliance and Advisory Statement. This hardware device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received, including interference
that may cause undesired operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures: 1) reorient or relocate the
receiving antenna; 2) increase the separation between the equipment and the receiver; 3)
connect the equipment to an outlet on a circuit different from that to
connected; 4) consult the dealer or an experienced radio/TV technician for help. Any changes
or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment. Where shielded interface cables have been provided
with the product or specified additional components or accessories elsewhere defined to be
used with the installation of the product, they must be used in order to ensure compliance with
FCC regulations.
Canadian DOC Statement. This digital device does not exceed the Class B limits for radio noise
emissions from digital apparatus specified in the interference-causing equipment standard
entitled "Digital Apparatus." ICES-003 of the Department of Communications.
Cet appareil numerique respecte les limites bruits radioelectriques applicables aux appareils
numeriques de Classe B prescrites dans la norme sur le materiel brouilleur: "Appareils
Numeriques," NMB-003 edictee par le Ministere des Communications.
This device complies with RSS-210 of Industry and Science Canada. Operation is subject to the
following two conditions: 1) this device may not cause interference, and 2) this device must
accept any interference, including interference that may cause undesired operation of the
device. Transmitter frequency: 26.995; 27.045; 27.145; 27.195 MHz. Power Output: < lOmV/m @
3m.