KYE SYSTEMS GMZH9 WIRELESS MOUSE User Manual R8000 eng vp CorelVentura 7 0

KYE Systems Corp WIRELESS MOUSE R8000 eng vp CorelVentura 7 0

USERS MANUAL

FCC ID:FSUGMZH9
Hardware Installation1. You can connect the receiver to a USB port of a PC or Notebook.2. If you want to connect the receiver to a PC orrecharge the batteries, please use the USB bat-tery charger Y cable. (Please do not connectthe receiver directly to a PC that is placedunder a table, or the RF performance will de-crease dramatically.)3. Install two AA rechargeable batteries in themouse. (Use only rechargeable batteries. Us-ing any other type of battery could cause seri-ous damage to your mouse or mainboard). Donot charge batteries unless there are otherbatteries in the mouse. Otherwise, you cannot use the mouse if you arecharging the batteries.4. Turn on your computer.5. After you open Windows, press the button on the receiver first, then press thebutton under the mouse for channel setting.1ENGLISH
Important: When you use this product for the first time, the mouse may seem to besluggish because it takes between 12 to 16 hours of use for the batteries to berecharged to obtain full performance. The other alternative is to recharge thebatteries before you use the Wireless optical mouse mouse device. Please removethe batteries if you do not use this device for at least two weeks.Warning: (Troubleshooting)1. Please do not use Wireless optical mouse on a desk which is made of glass, mir-ror, iron, or black velvet. Also, a flat surface is necessary or the Optical Sensorwill error easily. When you use Wireless optical mouse on a desk that is made ofmetal, try using a pad and reduce the receiving distance2. Before the first installation is completed (channel setting ready), the mouse willnot work.3. The Wireless optical mouse channel provides 256 ID-codes, and it automaticallyselects the ID # for your mouse. You can only set up one Wireless opticalmouse at a time. But if you have additional Wireless optical mouse sets in anarea of 10 square meters, more interference will occur between the receiver andyour mouse.4. If you feel the mouse does not move as smooth as usual, then the batteries havelost their charge, so you need to replace them or use the USB battery charger Ycable to recharge the batteries. The LED on the mouse shows thebattery-recharging status: it will shine when empty and be clear when thebatteries are recharged. You should set up the channel every time you replacethe batteries.5. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride)AA batteries, 1300 to 1500 mAH, 1.2 V. Please do not mix or use other typesof batteries (Li-ion, Ni-Cd, Alkaline, etc.). Recycle your batteries accordingto local law.6. The Wireless optical mouse with radio frequency gives you free movement andan enjoyable experience. For optimal performance, place the receiver at least 8inches (about 20 cm) away from the mouse and other electrical devices, such asthe computer, monitor, and etc.Software Installation1. Make sure the mouse is connected to the computer.2. Put the Setup disk (or CD) into the disk drive.3. Follow the instructions on the screen to finish the software installation.2
Factory SettingButton Assignments1. Left Button: Provides traditionalmouse functions such as click, dou-ble click and drag.2. Right Button: You can assign thisbutton frequently used keyboard andmouse functions in addition to fea-tures like EasyJump, Auto-Panning,Zoom, etc.3. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Win-dows documents.Horizontal Scroll: Press the rollerto the left and the cursor scrolls to the left; press the roller to the rightand the cursor scrolls to the right.4. Previous: See previous song when viewing the media Player.5. Next: Go to next song when viewing the media player.6. Vol. +: Increase volume7. Vol. -: Decrease volume8. Play & Pause: Play and pause of audio or video CD’s3ENGLISH
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu