KYE SYSTEMS GTU504 digitizing tablet User Manual

KYE Systems Corp digitizing tablet Users Manual

Contents

Users Manual

Easy Pen pro USB IntroductionPage: 1EUT : STYLUSFCC ID : FSUGTU504KYE SYSTEMS CORP.USER’S Manual
Easy Pen pro USB IntroductionPage: 2 FEDERAL COMMUNICATIONS COMMISSIONThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions:(1) this device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.NOTEThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection. This equipment generates,uses and can radiated radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interferencewill not occur in a particular installation If this equipment does causeharmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Shielded interface cables (Tablet) must be used in order to comply withemission limits.Changes or modifications not expressly approved by the party responsiblefor compliance could void the user‘s authority to operate the equipment.
Easy Pen pro USB IntroductionPage: 31.IntroductionThe Easy Pen pro USB is a graphics tablet that translates X-Y dimensional data intocomputer readable information in cordless pen. Its many use include :.Guiding the cursor on a computer screen..Picking up location on application template..Hand writing and electronic signature.Free hand talking on Internet conference and white board.Easy Pen pro USB is the best tool for pen computer that includes both absolute andrelative cursor expression modes. It uses the latest advances electromagnetictechnology, which make it accurate and reliable. The Easy Pen pro USB tabletcombine all the advantages of a mouse and graphics tablet to eliminate multiple inputdevices and to provide a simplified desktop. You can ‘map’ your tablet to correspondto the monitor screen, meaning if you place your pen at a specific location on thetablet, your screen cursor will also move to that location on the monitor.
Easy pen pro USB Fundamental SpecificationPage: 42. Fundamental Specification Platform Support PC Hardware Interface USB Software Driver GeniTab III USB for Windows3.x, 95, 98, NT3.x , 4.x Resolution Up to 2,540LPI Accuracy 0.01 inch Proximity 8 mm from surface of tablet Working Area Horizontal : 5 inches , Vertical : 3.75 inches Data Rate Low Speed 1.5Mbps Report Rate Up to 125 RPS in interrupt transaction Protocol Compliance HID v1.1 Power Source USB +5V Operation mode Endpoint 0 and Endpoint 1 . Technology Electromagnetic Cursor Support S-09W Cordless penFCC CLASS B, CE, BCIQ approved
Easy Pen pro USB Operation CharacteristicPage: 53.Operation Characteristic1. Tablet : Easy plug and works on USB port with (H) 5 x (V) 3.75 inches sketching area.2. Stylus : A ball point pen like pointing device , that delivers electromagnetic flux to tablet to point out where position is. One tip button like mouse “left button” and barrel button as “right and middle button” . Both tip and barrel button function are definable by user’s choice.3. Button operation force : Tip button: 15±5g Barrel button: 100±50g5.Status indicator on tablet : Continuous light on to express STYLUS locates in sensing altitude, means in proximity. Blinking express STYLUS locates out sensing altitude, means out proximity.1. Sketch template : A very thin film that help you easy to express art of Writing and sketching.
Easy Pen pro USB User Interface SpecificationsPage: 66.User Interface Specifications˙About Genius Tablet Genius Tablet is a graphics tablet used to create or reproduce diagrams, drawings, building layouts, maps, etc. You can then save these graphics into your computer for other uses.˙Using this tablet, you can: Trace anything; pictures, drawings, photos, maps, etc. Draw freehand; achieve precision and accuracy Move the puck (or stylus) to select commands on the template, or move objects on the screen Create a symbol library for your most often used symbols using AutoCAD
Easy Pen pro USB User Interface SpecificationsPage: 76.1 Information Folder˙General InformationThe Information Folder has general information about the Genius Tablet such asversion, corporation name and linking to Genius Web Site,etc.
Easy Pen pro USB User Interface SpecificationsPage: 86.2 Basic Folder˙Changing the Tablet OrientationOrientation allows you to rotate the Genius Tablet 90 degrees. Landscape is thenormal operating position (with the tablet's interface cables exiting the top of thetablet). Selecting Portrait allows you to rotate the tablet 90 degrees clockwise fromthe normal operating position (so the tablet's interface cables would be exiting fromthe right hand side of the tablet). Try changing to portrait orientation if you preferusing your tablet in a vertical orientation, like a typical sketch pad.˙Double-Click TestIn the Double-Click Test Box, you can set the widest and highest distance between thetwo points of double click and you can set the speed of double click by dragging thepointer on the slider bar or clicking on the slider bar. Then test the speed in the"Smiling" area.˙Tracking ModeThe Tracking Mode function allows you to switch how the Genius Tablet moves the screen cursor.The Absolute tracking mode is the normal (default) tablet mode. In absolute mode thescreen is directly mapped to the tablet's active area. In this mode, the lower leftcorner of the tablet's active area corresponds to the lower left corner of the screen, theupper right corner on the tablet corresponds to the upper right corner of the screen,etc. When you place a pointing device on the tablet, the screen cursor would jump tothe location on the screen that directly corresponds to the position on the tablet. You'llnotice that you don't have to "row" the cursor (e.g., pick up and move over and moveagain) like you often have to do with a conventional mouse.On the other hand, in Relative tracking mode you move the screen cursor just like youwould with a mouse. In relative mode it's possible to find yourself with the screencursor at one side of the screen, while your pointing device is at the opposite side ofthe tablet. In that case, you would have to pick up and move your pointing device justlike you would do with a mouse. You can set the Relative Resolution in this area byclicking the bar. The resolution means the number of pixel in an inch. The resolutionis higher on the right side than on the left side.
Easy Pen pro USB User Interface SpecificationsPage: 9˙Tablet InformationYou can see the width and height of the tablet in this area.˙Adjust the Resolution in Absolute ModeIn the Resolution area, you can set the resolution of the tablet in absolute trackingmode. The resolution refers to the number of pixel in an inch. You can set it from 254to 2540.
Easy Pen pro USB User Interface SpecificationsPage: 106.3 Button Assignment Folder˙Use the Button Assignment FunctionThe Button Assignment function allows you to change the function of the buttons onyour pointing device. Select which pointing device you are using from the PointingDevice list. This would allow you to change the functions assigned to the differentbuttons on that device. Simply pick the button in the Assignment area thatcorresponds to the pointing device button you wish to change and then select from thefunction list the function you wish to assign to that button. You can set the function ofyour button as Left Click, Right Click, Middle Double Click, Copy, etc.
Easy Pen pro USB User Interface SpecificationsPage: 116.4 Working Area Folder˙Adjust Working AreaThe default option is the Whole Tablet.When the Tracking Mode in the Basic folder is Absolute, you can define the trackingarea as your require. This is especially useful if you have a large tablet and you wantto define a smaller active area so you don't have to move the pointing device aroundso far on the tablet.In order to set the tracking area:1) Choose the Preserve Aspect.2) Click on the Define button, then the define area will turn grey.3) Click on any button in the define area, drag the puck, then click the button again.The area will be defined. Some information about the defined area such as Top,Bottom, Right, Left, Width, Height will appear in the Area Information. You canchange the units from inch to centimeters. If you change it ,the number informationwill also be changed.You can input the number of Left, Top, Right, Bottom, Width and Height or click onthese up-down controls in the Area Information as you require, then the working areawill be defined.
Easy Pen pro USB User Interface SpecificationsPage: 126.5 Test Folder˙Test Your ButtonsIn this area, you can verify if all of your pointing device buttons are operatingproperly. Move your pointing device around the tablet and press the buttons (and thepen tip, if using a stylus). You will see the position of the cursor on the screen in theModel Name area, and the button in this area will flash to respond to the buttonpresses. When you move your puck in the test area on the right side , you will seetrails remain responding your button's movement. Click on "clear" to clear this area.
Easy Pen pro USB Packing SpecificationsPage: 136.6 Pressure Folder˙PressureFor the WizardPad, you can use the Pressure folder in the Genius Tablet ControlPanel.If you want to adjust the pressure, click "Customize in Pressure Mode area", then youcan customize the feel of your pressure-sensitive pen by setting these options.Threshold allows you to define how hard you have to press on the tip of the penbefore it "reads" a "click," and the function assigned to it is executed. The thresholdcan be set from 0 to 255.Pressure Response allows you to set how soft or firm the pen feels when drawing. Thepen is harder when you increase the number.The Test Area is a small pressure-sensitive drawing area that allows you to test howthe pen reacts to the options in the control panel. You can click on "clear" to clear thearea.

Navigation menu