KYE SYSTEMS KT001 TrackPad User Manual Manual 20120709

KYE Systems Corp TrackPad Manual 20120709

User Manual

Download: KYE SYSTEMS KT001 TrackPad User Manual Manual 20120709
Mirror Download [FCC.gov]KYE SYSTEMS KT001 TrackPad User Manual Manual 20120709
Document ID1756483
Application ID9A6YDOfI3uxDQeDZshEkYQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.69kB (271096 bits)
Date Submitted2012-07-31 00:00:00
Date Available2012-07-31 00:00:00
Creation Date2012-07-18 18:19:48
Producing SoftwareGPL Ghostscript 9.0
Document Lastmod2012-07-30 18:07:16
Document TitleManual 20120709
Document CreatorPDFCreator Version 1.2.0
Document Author: Teresa

HP Wireless Trackpad (ATOLL)
Enjoy the perfect trackpad combo for
your PC.
Reduce desktop clutter with wireless
connection and enhance workspace
comfort with modern design.
1. Put your receiver into PC.
2. Pull out the insulation sheet.
2. Pair
The LED for dongle will blink flash 8 times, then you can use on you PC.
3. Functions
3.1 Mouse functions
a. Mouse cursor and button
Mouse button
Item
Mouse Cursor
Right button
Left button
Middle button
Method one
Method two
Have
●
●
●
●
●
Action
Slide
Tap
Tap
Tap
Tap
Tap
Tap
Two fingers tap
Three fingers tap
button
button
button
button
Method
Area
Slide
b. Mouse wheel
Mouse wheel
Horizontal Scroll
Item
Vertical Scroll
(Tilt Wheel)
Method one
Method two
Method one
Method two
Have
●
●
●
●
Action
Slide
Slide
Slide
Slide
One finger slide
Two fingers slide
One finger slide
Two fingers slide
Method
Area
c. Mouse left functions
Mouse left functions
Item
Single tap
Double tap
Double tap then hold
Have
●
●
●
Action
Tap
Tap
Tap
Single tap
Double tap
Double tap then hold
Method
Area
3.2 Gesture function
Zoom
Rotate
Edge swipe
Item
Out
In
Lift
Toggle the
Toggle the
Switch to last
charms
app bar
application
Right
Have
●
●
●
●
●
●
●
Action
Slide
Slide
Slide
Slide
Slide
Slide
Slide
Two
Two
Two
Two
One
One
One
fingers
fingers
fingers
fingers
finger
finger
finger
slide
slide
slide
slide
slide
slide
slide
Method
Area
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est
sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout
brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Assemble
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : GPL Ghostscript  9.0
Keywords                        : 
Modify Date                     : 2012:07:30 18:07:16+08:00
Create Date                     : 2012:07:18 18:19:48+08:00
Creator Tool                    : PDFCreator Version 1.2.0
Metadata Date                   : 2012:07:30 18:07:16+08:00
Document ID                     : 9f703c93-d31d-11e1-0000-6cdd239df65e
Instance ID                     : uuid:8e0a5000-9236-4c36-a5ad-970d14c20937
Format                          : application/pdf
Title                           : Manual 20120709
Creator                         : Teresa
Description                     : ()
Page Count                      : 3
Subject                         : 
Author                          : Teresa
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FSUKT001

Navigation menu