KYE SYSTEMS KT002 Dongle User Manual Users Man FSUKT002

KYE Systems Corp Dongle Users Man FSUKT002

User Manual

1. Put your receiver into PC. 2. Pull out the insulation sheet. 2. Pair The LED for dongle will blink flash 8 times, then you can use on you PC. 3. Functions 3.1 Mouse functions a. Mouse cursor and button Item Mouse Cursor Mouse button Left button Right button Middle button Method one Method two Have ● ● ● ● ● Action Slide Tap Tap Tap Tap Method Slide Tap + button Tap + button Two fingers tap + button Three fingers tap + button Area Enjoy the perfect trackpad combo for your PC. Reduce desktop clutter with wireless connection and enhance workspace comfort with modern design. HP Wireless Trackpad
b. Mouse wheel Item Mouse wheel Vertical Scroll Horizontal Scroll (Tilt Wheel) Action Slide Slide Slide Method Two fingers slide Two fingers slide Area c. Mouse left functions Item Mouse left functions Single tap Double tap Double tap then hold Have ● ● ● Action Tap Tap Tap Method Single tap Double tap Double tap then hold Area 3.2 Gesture function Item Zoom Rotate Edge swipe Out In Lift Right Toggle the charms Toggle the app bar Switch to last application Have ● ● ● ● ● ● ● Action Slide Slide Slide Slide Slide Slide Slide Method Two fingers slide Two fingers slide Two fingers slide Two fingers slide One finger slide One finger slide One finger slide Area
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Navigation menu