KYE SYSTEMS KT002 Dongle User Manual Users Man FSUKT002
KYE Systems Corp Dongle Users Man FSUKT002
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1831240 |
| Application ID | GyfjEBo7Nbj/PpgV8BnSww== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.8kB (260003 bits) |
| Date Submitted | 2012-11-06 00:00:00 |
| Date Available | 2013-05-05 00:00:00 |
| Creation Date | 2012-11-05 17:27:19 |
| Producing Software | GPL Ghostscript 9.04 |
| Document Lastmod | 2012-11-05 17:27:48 |
| Document Title | Users Man_FSUKT002 |
| Document Creator | PDFCreator Version 1.2.3 |
| Document Author: | AnneKuo |
HP Wireless Trackpad Enjoy the perfect trackpad combo for your PC. Reduce desktop clutter with wireless connection and enhance workspace comfort with modern design. 1. Put your receiver into PC. 2. Pull out the insulation sheet. 2. Pair The LED for dongle will blink flash 8 times, then you can use on you PC. 3. Functions 3.1 Mouse functions a. Mouse cursor and button Mouse button Item Mouse Cursor Right button Left button Middle button Method one Method two Have ● ● ● ● ● Action Slide Tap Tap Tap Tap Tap Tap Two fingers tap Three fingers tap button button button button Method Area Slide b. Mouse wheel Mouse wheel Item Horizontal Scroll Vertical Scroll (Tilt Wheel) Action Slide Slide Method Slide Two fingers slide Two fingers slide Area c. Mouse left functions Mouse left functions Item Single tap Double tap Double tap then hold Have ● ● ● Action Tap Tap Tap Single tap Double tap Double tap then hold Method Area 3.2 Gesture function Zoom Rotate Edge swipe Item Out In Lift Toggle the Toggle the Switch to last charms app bar application Right Have ● ● ● ● ● ● ● Action Slide Slide Slide Slide Slide Slide Slide Two Two Two Two One One One fingers fingers fingers fingers finger finger finger slide slide slide slide slide slide slide Method Area Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2012:11:05 17:27:19+08:00 Creator Tool : PDFCreator Version 1.2.3 Modify Date : 2012:11:05 17:27:48+08:00 Metadata Date : 2012:11:05 17:27:48+08:00 Format : application/pdf Description : Creator : AnneKuo Title : Users Man_FSUKT002 Keywords : Producer : GPL Ghostscript 9.04 Document ID : uuid:af79e3c7-834b-41d5-bf83-3a19461b646a Instance ID : uuid:a9067ec9-c3d8-48c6-85e7-ef9bf89ef2d8 Page Count : 3 Subject : Author : AnneKuoEXIF Metadata provided by EXIF.tools