KYOCERA Document Solutions B5J0151 RFID Transmitter Module User Manual B5J0151 201 Setup manual

KYOCERA Document Solutions Inc. RFID Transmitter Module B5J0151 201 Setup manual

Manual

B5J0151 Setup manual    B5J0151 is attached in printer according to the following photo 1 and 2.    photo 1                                            photo 2    RFID Tag is attached in toner cartridge according to the following photo 3.                                        photo 3 B5J0151 cover RFID Tag B5J-0151B5J-0151B5J-0151
FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  NOTICE This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, pursuant  to  part 15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:     -Reorient or relocate the receiving antenna   -Increase the separation between the equipment and receiver.   -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.   -Consult the dealer or an experienced radio/TV technician for help.      There is not an official manual to this module(B5J0151), but it is necessary for it to be included an explanatory note in a user manual of a product using this module. B5J-0151(B5J-0151)Since B5J-0151 owns its FCC ID and IC Number, we shall affix an exterior label on the outside of a product if the FCC ID and IC Number are not visible. The exterior label shall use wording such as either "Contains Transmitter Module FCC ID: E52B5J0151 / IC: 1059B-B5J0151" or "Contains FCC ID: E52B5J0151 / IC: 1059B-B5J0151".This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.There is not an official manual to this module (B5J-0151) but it is necessary for it to be included an explanatory note in a user manual of a product using this module.

Navigation menu