KYOCERA Document Solutions B5J0151 RFID Transmitter Module User Manual B5J0151 201 Setup manual
KYOCERA Document Solutions Inc. RFID Transmitter Module B5J0151 201 Setup manual
Manual
B5J0151 Setup manual
B5J0151 is attached in printer according to the following photo 1 and 2.
photo 1
photo 2
RFID Tag is attached in toner cartridge according to the following photo 3.
photo 3
B5J0151
cover
RFID Tag
B5J-0151
B5J-0151
B5J-0151
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
There is not an official manual to this module(B5J0151), but it is necessary for it to
be included an explanatory note in a user manual of a product using this module.
B5J-0151
(B5J-0151)
Since B5J-0151 owns its FCC ID and IC Number, we shall affix an exterior label on the outside of a product if
the FCC ID and IC Number are not visible. The exterior label shall use wording such as either "Contains
Transmitter Module FCC ID: E52B5J0151 / IC: 1059B-B5J0151" or "Contains FCC ID: E52B5J0151 / IC:
1059B-B5J0151".
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of this device.
There is not an official manual to this module (B5J-0151) but it is necessary for it to be included an
explanatory note in a user manual of a product using this module.