Kaba Ilco Key Machine Cutter Guide

User Manual: Kaba Ilco Key Machine Cutter Guide Literature

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

Key Machines

Key Machine Cutters

A Cross Reference and Replacement Guide

ILCO Key Machine Cutter Guide • Revised 6/14

1

This guide serves as a cross reference and replacement index. Included is a specification chart for all cutters currently available from Kaba Ilco Corp. The cutter replacement
guide includes the original cutter as well as optional cutters that may be available for each
machine. Page 8 of this guide provides a cross reference for machines manufactured by
other companies and the Ilco cutters that are available as replacements.

Ilco cutters are carefully designed, made of the finest materials, and thoroughly inspected
for defects in materials or workmanship.
Because cutters are used under conditions over which we have no control, Kaba Ilco Corp.
cannot guarantee nor be held responsible for cutters damaged in use.

Table of Contents
Cutter Styles...................................................................................................................................................page 3
Cutter Replacement Guide........................................................................................................................pages 4-6
By Model Cutter Replacement Guide...................................................................................................... pages 7-8
Cutter Replacement - Silca / Ilco Orion............................................................................................................. 9-10

2

ILCO Key Machine Cutter Guide • Revised 6/14

CUTTER STYLES
1. Slotter - Designed to cut flat steel and safe deposit
keys.
2. Side Milling Slotter - Designed to cut flat steel and
safe deposit keys. This cutter has teeth along its sides
so the key machine can widen cuts with a side to side
cutting motion.

1. Slotter

2. Side Milling Slotter

3. Milling - The teeth on a milling cutter are formed using
a grinding or milling machine operation on the basic
cutter blank. Ilco milling cutters are manufactured using
high-quality steels and offer greater durability than
rotary file cutters.
4. Fine Milling - Fine milling cutters are manufactured
using the same technique for milling cutters. They feature fine, closely spaced teeth, a smooth cutting action,
and greater service life compared to the rotary file-type
cutter.

3. Milling
4. Fine Milling

T - Special cutter for side ward cuts on bit keys.

6

Ward - Special cutter for sideward cuts on bit keys.

7. End Mill – When used on certain machines, an end mill
cutter can mill grooves in keys or make cuts in tubular
keys. Some end mill cutters may be used on electronic
machines for cutting edge cut standard automotive
keys (i.e. H158 used with D Clamp on Tri-Code HS).
8. Laser – Designed for cutting sidewinder High Security
keys. On mechanical duplicating machines, a matching
tracer is required.

7. End Mill

6. Ward

5

8. Laser

5. T
ILCO Key Machine Cutter Guide • Revised 6/14

3

CUTTER REPLACEMENT GUIDE

		
					
					
Diameter
Thickness
Hole Diameter
Cutter Profile Angle
Ilco
Number
Type
Material
In.
mm
In.
mm
In.
mm
A° B° F In. mm
Used on Machines
AT-U01
Milling
H.S.S.
2.38
60.4
.207
5.25
.375
9.52
0
80
.004R .10
Ilco EZ®-Code
CU1
Milling
H.S.S.
2.25
57.15
.25
6.35
.5
12.7
0
45
.015R .381 Ilco 022, 027, 027A; Taylor KD1, KD1A, KD5, KD6, KD6AG,
													
KD8, KD9
3FS-HS
Slotter
H.S.S.
2.5
63.50
.055
1.4
.375
9.52					
Ilco 2175-IA, 2177-ID, 2179-IM
3S
Slotter
H.S.S.
2.5
63.50
.04
1.02
.375
9.52					
DL 125, 125A, 126, 126M
4S
Slotter
H.S.S.
2.25
57.15
.04
1.02
.5
12.7					
DL 136, 136D, 146, 146D
CU5
Milling
H.S.S.
2.25
57.15
.25
6.35
.5
12.7
0
45
.020
.508 Taylor KD1, KD5, KD6, KD20; Curtis - various models
7FS-HS
Slotter
H.S.S.
2.5
63.50
.04
1.02
.375
9.52					
Ilco 2175-IA, 2177-ID, 2179-IM
8UC
Milling
H.S.S.
2.375
60.32
.242
6.15
.0375
9.52
45
45
.035F .889 Ilco 2178U, 2178UA, 2178UC
9MC
Milling
H.S.S.
2.875
73.02
.206
5.23
.5
12.7
30
30
.025R .635 Ilco 016,017,018
P-9MC*
Milling
H.S.S.
2.875
73.02
.206
5.23
.5
12.7
30
30
.025R .635 Ilco 016,017,018
9RF
Fine Milling H.S.S.
2.75
69.85
.25
6.35
.0375
9.52
30
0
.031R .787 Ilco 2175-IA,2177-ID, Keil OF
10FS
Slotter
H.S.S.
2.5
63.50
.03
.76
.375
9.52					
Ilco 2175-IA, 2177-ID, 2179-IM
10MC
Milling
H.S.S.
2.75
69.85
.28
7.11
.875
22.22
30
30
.018F .45
DL 125A, 128AM, 128SM, 130AM, 132AM, 150AM; Keil 1, 1-1/2
S-10MC
Milling
H.S.S.
2.75
69.85
.24
6.1
.875
22.23
60
60
.020
.508 DL 125, 126M
11
Slotter
H.S.S.
2.063
52.39
.035
.89
.05
12.7					
Ilco 2196K; Keil 6-1/2
11FS-24
Slotter
H.S.S.
2.781
70.64
.045
1.14
.375
9.52					
Ilco 2179-IM: Keil 0, OF
11MC
Milling
H.S.S.
2.375
60.32
.28
7.11
.5
12.7
30
30
.015F .38
Ilco 024; DL 144M, 144MA; Taylor 144MT
CU11
Milling
Cobalt
3.15
80
.197
4.97
.63
16
40
40			
Ilco KD40, KD50, KD71; Borkey
12
Slotter
H.S.S.
2.063
52.39
.045
1.14
.5
12.7					
Ilco 2196K; Keil 6, 6-1/2
13
Slotter
H.S.S.
2.063
52.39
.072
1.83
.5
12.7					
Ilco 2196K; Keil 6, 6-1/2
13FS-HS
Slotter
H.S.S.
2.25
57.17
.045
1.14
.437
11.11					
Taylor KD10; Segal 815-1815; HPC 6210, 6200, 9310 DKM
14 (14T)
T
H.S.S.
2
50.80 .440 Wide 11.18
.5
12.7					
Ilco 2196K; Keil 6-1/2; Taylor KD10
CU14
Milling
Cobalt
2.48
63
.197
5
.63
15
42
42			 Ilco KD14
T14MC
Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
50
50
.050F 1.27
Ilco Universal II; HPC 1200CM; Lagard LG1011
15FS-HS
Slotter
H.S.S.
2.5
63.50
.045
1.14
.375
9.52					
Ilco 2175-IA, 2177-ID, 2179-IM;
CU15
Slotter
H.S.S.
2.498
63
.039
1
.63
16					 Ilco KD15
16CT
End Mill
H.S.S.
.187
4.76									
Ilco 009; Taylor KD30, KD90
16TW
End Mill
H.S.S.
.236
6
.234
5.95							
Ilco 009B
17
Slotter
H.S.S.
2.063
52.39
.274
6.96
.5
12.7					
Ilco 2196K; Keil 6-1/2
CU18-1
Slotter
Carbide
3.15
80
.059
1.5
.866
22					
Ilco KD16, KD17, KD18
CU18-2
Slotter
Carbide
3.15
80
.039
1
.866
22					
Ilco KD16, KD17, KD18
CU18-3
Ward Slotter Carbide
1.26
32
.053
1.35							
Ilco KD18
19MC
Milling
H.S.S.
2.875
73.02
.28
7.11
.5
12.78
30
30
.031R .787 Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10
P-19MC*
Milling
H.S.S.
2.875
73.02
.28
7.11
.5
12.78
30
30
.031R .787 Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10
20MC
Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
38
38
.070R .178 Ilco 2178U, 2178UA, 2178UC, 178U
CU20
Milling
H.S.S.
2.375
60.32
.25
6.35
.5
12.7
0
45
.031R .787 Ilco 020,024A,024B,040,044
P-CU20*
Milling
H.S.S.
2.375
60.32
.25
6.35
.5
12.7
0
45
.031R .787 Ilco 020,024A,024B,040,044
TCW-20FM Fine Milling H.S.S.
2.375
60.32
.375
9.52
.375
9.52
38
38
.064F 1.6
Ilco Universal II; HPC 1200CM; Lagard LG1011
21MC
Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
39
39
.050 1.27
Ilco 2178U, 2178UA, 2178UC, 178U
* Available with Titanium Nitride coating (add prefix “P”)

4

•

Cutter Profile
Angles
A

B

F

Note: In the above drawing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example .015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measurement is followed by ‘F’ (Example - .010F), it means that
the tip of the cutter is .010
wide and is flat.

H. S. S. - High Speed Steel

ILCO Key Machine Cutter Guide • Revised 6/14

CUTTER REPLACEMENT GUIDE (Con’t)

		
					
					
Diameter
Thickness
Hole Diameter
Cutter Profile Angle
Ilco
Number
Type
Material
In.
mm
In.
mm
In.
mm
A° B° F In. mm
Used on Machines
23RF
Fine Milling H.S.S.
2.25
57.15
.25
6.35
.5
12.7
45
0
.031R .787 Ilco 008, 008A, 008B, 2184CD, H2584CV, 2585DU, 190; DL
													
145, 145M, 147, 149M; HPC 9100, 9110; Taylor KD1, KD5,
													
KD20; Keil 4-1/2, 12-1/2, 13-1/2, 15; Curtis 2000
X23MC
Milling
H.S.S.
2.375
60.32
.104
2.64
.5
12.7
0
45
.081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor 143MT,
													
145MT
P-X23MC* Milling
H.S.S.
2.375
60.32
.104
2.64
.5
12.7
0
45
.081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor 143MT,
													
145MT
X23MC SPL Milling
H.S.S.
2.375
60.32
.104
2.64
.5
12.7
0
45
.081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor
		
(AlTiN Coated) 											
143MT, 145MT
25
Slotter
H.S.S.
2.5
63.50
.045
1.14
.5
12.7						Keil 10-1/2
27
Slotter
H.S.S.
2.25
57.15
.045
1.14
.5
12.7					
Ilco 2184CD, 2584CV; DL 146, 146M; HPC 9100, 9110;
													
Taylor KD1; Keil 4-1/2, 12-1/2
27-1
Slotter
H.S.S.
2.25
57.15
.03
.76
.5
12.7					
Ilco 2184CD, 2584CV; DL 146, 146M; HPC 9100, 9110;
													
Taylor KD1; Keil 4-1/2, 12-1/2
27-2
Slotter
H.S.S.
2.375
60.32
.03
.76
.5
12.7					
Ilco 2585DU; Keil 15-1/2
28RF
Fine Milling H.S.S.
2.063
52.39
.25
6.35
.5
12.7
0
45
.025R .635 Ilco 2196K
CU29
Milling
H.S.S.
2.375
60.32
.27
6.86
.5
12.7
45
45
.064 1.626 Ilco 029A
SMS30
Side Milling H.S.S.
2.375
60.32
.03
.76
.5
12.7					
Ilco 2184CD, 2584CV, H2585SMS; HPC 9110; Keil 12S,
Slotter 												
12-1/2S, 15S 15-1/2S
CU30-55
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.055 1.4
Ilco 030, 031; PPI Halftime
CU30-55
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.055 1.4
Ilco 030, 031; PPI Halftime
CU30-62
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.062 1.57
Ilco 030, 031; PPI Halftime
CU30-72
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.072 1.83
Ilco 030, 031; PPI Halftime
CU30-88
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.088 2.24
Ilco 030, 031
CU30-M
Slotter
Carbide
4
101.60
.055
1.4
1
25.4			
.050 1.27
Ilco 030, 031; PPI Halftime
32
Slotter
H.S.S.
2.063
52.39
.03
.76
.5
12.7					
Ilco 2196K; Keil 6-1/2
34MC
Milling
H.S.S.
2.25
57.15
.25
6.35
.5
12.7
0
45
.031R .787 Ilco 2184CD, 2584CV, 2585DU; Keil 4-1/2, 12-1/2
P-34MC*
Milling
H.S.S.
2.25
57.15
.25
6.35
.5
12.7
0
45
.031R .787 Ilco 2184CD, 2584CV, 2585DU; Keil 4-1/2, 12-1/2
36MC
Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
45
45
.088F 2.24
Ilco 2178U, 2178UA, 2178UC, 178U
37MC
Milling
H.S.S.
2.25
57.15
.20
5.08
.5
12.7
45
45
.025F .635 Ilco 2184CD, 2585DU; HPC 9100, 9110; DL 135, 135M, 145,
													
145M; Taylor KD5
CU45
Slotter
H.S.S.
2.48
63
.071
1.8
.63
16					
Ilco KD45, KD46, KD83
SMS45
Side Milling H.S.S.
2.375
60.32
.045
1.14
.5
12.7					
Ilco 046, 046HD, 2584SMS, 2585SMS; HPC 9110;
Slotter 												
Keil 12S, 12-1/2S, 15S, 15-1/2S
P-45SMS* Side Milling H.S.S.
2.375
60.32
.045
1.14
.5
12.7
42
45
.045 1.143 Ilco 046, 046HD, 2584SMS, 2585SMS; HPC 9110;
Slotter 												
Keil 12S, 12-1/2S, 15S, 15-1/2S
TCW-47MC Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
42
45
.035F .889 Ilco Universal II; HPC 1200CM; Lagard LG1011
CU50A
Milling
Cobalt
3.15
80
.197
5
.63
16
40
40			
Ilco KD50A, KD71A, KD50C; Silca Bravo II, Bravo III,
													
Bravo III w/EZ Jaw
57MC
Milling
H.S.S.
2.75
69.85
.281
7.14
.5
12.7
0
30
.020
.508 Sagar SA500, SA500A
58MC
Milling
H.S.S.
2.75
69.85
.281
7.14
.5
12.7
0
30
.020
.508 Sagar SA500, SA500A
* Available with Titanium Nitride coating (add prefix “P”)

ILCO Key Machine Cutter Guide • Revised 6/14

•

Cutter Profile
Angles
A

B

F

Note: In the above drawing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example .015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measurement is followed by ‘F’ (Example - .010F), it means that
the tip of the cutter is .010
wide and is flat.

H. S. S. - High Speed Steel

5

CUTTER REPLACEMENT GUIDE (Con’t)

		
					
					
Diameter
Thickness
Hole Diameter
Cutter Profile Angle
Ilco
Number
Type
Material
In.
mm
In.
mm
In.
mm
A° B° F In. mm
Used on Machines
CU82
Milling
Cobalt
3.15
80
.276
7
.63
16
45
45			 Ilco KD82
CU84
Slotter
H.S.S.
2.48
63
.094
2.4
.63
16					
Ilco KD84, KD84A
CU85
Milling
Cobalt
2.362
60
.374
9.5
.374
9.53
42.75 42.75 .016
.4
Ilco KD85
TCW-90MC Milling
H S. S.
2.375
60.32
.375
9.52
.375
9.52
45
45
.052F 1.32
Ilco Universal II; HPC 1200CM; Lagard LG1011
CU94
End Mill
H.S.S.
.225
5.72									
Ilco KD94, KD95
P-CU100A* Milling
H.S.S.
3.15
80
.197
5
.63
16
40
40			
Ilco ECM 100
SA160
Milling
H.S.S.
2.25
57.15
.281
7.14
.5
12.7
30
30
.032R .813 Sagar SA100, SA200
TCW-1011 Milling
H.S.S.
2.375
60.32
.29
7.37
.375
9.52
45
45
.044F 1.12
Ilco Universal II; HPC 1200CM; Lagard LG1011
SACW-1012 Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
43
43
.015F .381 Ilco Universal II; HPC 1200CM; Lagard LG1011
SACW-1013 Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
50
50
.046F 1.17
Ilco Universal II; HPC 1200CM; Lagard LG1011
TCW-1014 Milling
H.S.S.
2.375
60.32
.375
9.52
.375
9.52
50
50
.08F 2.032 Ilco Universal II; HPC 1200CM; Lagard LG1011
AM7625
Milling
H.S.S.
2.25
57.15
.125
3.18
.5
12.7
0
20
.03R .762 Cole various model

* Available with Titanium Nitride coating (add prefix “P”)

6

•

H. S. S. - High Speed Steel

Cutter Profile
Angles
A

B

F

Note: In the above drawing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example .015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measurement is followed by ‘F’ (Example - .010F), it means that
the tip of the cutter is .010
wide and is flat.

ILCO Key Machine Cutter Guide • Revised 6/14

CUTTER REPLACEMENT BY MODEL GUIDE
Machine

Original
Optional
ILCO
006
19MC
P-19MC
008, 008A, 008B
23RF
27 (Slotter)
009,
16CT
009A, 009B
16TW
010
19MC
P-19MC
016, 017, 018
P-9MC
9MC
020, 024A, 024B
CU20
P-CU20
022
CU1
023, 025
P-X23MC
X23MC
045, 045HD
P-X23MC
X23MC
024
11MC
026
P-45SMS
45SMS, 30SMS
027, 027A
CU1
029A
CU29
030
CU30-55
CU30-62, -72,
		
-88, -M
031
CU30-88
CU30-55, -62,
		
-72, -M
040, 040HD
P-CU20
CU20
044, 044HD
P-CU20
CU20
046, 046HD
P-45SMS
SMS45
057 HS
F22
F44SPL
ECM 100
P-CU100A
AT-U01/U01
D705933ZB
ILCO EZ®-Code
(AL-TiN)
Carbide
Universal II
T14MC
TCW-20FM,
TCW-1011MC
TCW-47MC,
		TCW-90MC,
		TCW1011,
		SACW1012,
		SACW1013,
		SACW1014
2175-IA
9RF or 3FS-HS
7FS-HS, 10FS,
		15FS-HS
2177-ID
9RF or 3FS-HS
7FS-HS, 10FS,
		15FS-HS
2178U
8UC
20MC, 21MC,
		
22MC, 36MC
2179-IM
9RF,
7FS-HS, 10FS
3FS-HS
11FS-24,
		15FS-HS
2183DM, 2183HM
19MC
P-19MC
2184CD
23RF
27, 27-1, 34MC,
		
P-34MC, SMS30,
		
37MC, P-45SMS
ILCO Key Machine Cutter Guide • Revised 6/14

Machine

Original
Optional
ILCO (Con’t)
2196K
12, 13, 17, or 32
11, 28RF
2584CV
34MC
27, 27-1,
		P-34MC,
		
37MC, SMS30,
		SMS45
H2584CV
34MC
P-34MC,
		
37MC, 45SMS,
2584SMS
SMS45
P-45SMS, 27
H2584SMS
27
SMS30,
		P-45SMS
2585DU
34MC, 37MC,
27-2, P-34MC ,
45SMS
37MC
2585SMS
30SMS, SMS45
P-45SMS
SILCA
AY 100-C
D701652ZB
Bravo
D700875ZB
Bravo Master
D700875ZB
Bravo USA
D700875ZB
Bravo II
D717898
CU50A,
		D700875ZB
		
D704861ZB 		
		
Requires Carbide
		
Pulley Set
Bravo III
D717898
CU50A,
		D700875ZB
		
D704861ZB 		
		
Requires Carbide
		
Pulley Set
Bravo III (w/EZ-Jaw)
D717898
CU50A,
		D700875ZB
		
D704861ZB 		
		
Requires Carbide
		
Pulley Set
Cadet
D706766ZB
Club, Club Jr
D705488ZB (F22) Various types
Crown
D700077ZB
D705407ZB
		D704541ZB
Delta A/M/S
D911868ZR
Delta Multicopy
D714448ZB
SG19
Delta 2000 FO
D913645ZR
SG18
Delta Flat Steel
D712505ZB (.045)
D412506ZZ (.030)
Delta Plus
D911868ZR
Doge
D701089ZB (F11) Various types
SILCA (Con’t)

Machine

Original
Optional
SILCA (Con’t)
Futura
D742607ZB (01F)
D742606ZB (01L) D743671ZB (02L)
		
D743672ZB (03L)
D742267ZB (01D) D743673 (02D)
GT40
D700080ZB
GT 40-C
D301744ZZ
Larus
D706766ZB
Lancer, Lancer Plus
D705374ZB
D711119ZB
		
(Ward Cutter),
		D700204ZB
Matrix II
D739973ZB (F22) Various types
Matrix S, SX, SLX
D705488ZB (F22) Various types
Poker Plus
D700875ZB
Prima Laser
D709696ZB
Quattrocode
D709238ZB (W101) Various types
Rekord 2000, Rekord Plus D700875ZB
Scout
D401866ZZ
Special Master
D700875ZB
Speed
D935282ZR
Sprint
D401647ZA
Super Special
D700875ZB
Targa 2000
D300080ZB
Tech 3 Europa
D700080ZB
Triax
D708742ZB
AL/TIN-H101
(H101)
Cutter
		
Various types
Triax e.code
D708742ZB
AL/TIN-H101
(H101)
Cutter
		
Various types
Tri-Code HS

D708742ZB)
AL/TIN-H101
(H101)
Cutter,
		D709238ZB
		W101,
		D709482ZB
		W114,
		D737688ZB
		W302
Ultracode/
D716549ZB
D705933ZB
Unocode
(U01)
Carbide,
		
various slotters
UC199
D734910ZB
(Carbide)

7

CUTTER REPLACEMENT BY MODEL GUIDE (Con’t)
Machine

Original
Optional
ILCO/ORION
KD14
MH234.001
CU14
KD15 (Halley-B)
BH238.008
CU15
KD16, KD17
M202.112
CU18-1
M202.116
CU18-2
KD18
M202.112
CU18-1
M202.116
CU18-2
ME205.056
CU18-3
KD45, KD46, KD83
SC235.044
CU45
KD50
MS200.056
CU11
KD50A, KD50C
D700875ZB
CU50A
KD55		
see page 9
KD56		
see page 9-10
KD71
MS200.056
Early models
		
CU11, Later
		
models CU50A
KD71A		CU50A
KD82
DA219.055
CU82
KD84, KD84A
SI240.001
CU84
KD85
MD237.039
CU85 or
		SACW1012
KD94, KD95
M208.019
CU94
Nova 2000		
CU56-048
BORKEY
REXA 1, 11, 111
V8
CU11
954-2 DSB REXA
V8
CU11
972 WASTA-TEX
V8
CU11
CURTIS
2,2000,3000
CU5
CU5
9		14T
COLE
200, 3K
AM7625
AM7625
2277
X23MC
N200
CU5
CU5
DOMINION LOCK
125, 125A,
S10-MC
S10-MC
126, 126M
3S
3S
128S, 128AM
10MC
10MC
136,146
4S
4S
130AM, 132AM,
S10-MC
S10-MC
150AM
143M
X23MC
X23MC
144M
11MC
11MC

8

Machine

Original
DOMINION LOCK (Con’t)
145,145M
X23MC
23RF
16MC
147M
23RF
148M
X23MC
149M
23RF
16MC
ESP
1000, 3000, 5000, 660,990 34MC
HPC
6200,6210
CW33
9100
CW23RF
CW16
CW39
CW34MC
9110
CW23RF
CW16
CW39
CW30SMS
CW34MC
9120RM, 9220RM
CW23RM
9160MC. 9170MC
CW23MC
9319
CW33
1200MC
CW1011
CW1012
CW1013
CW14MC
ONE
CW80
THREE
CW80
KEIL
O
24
OF
24
11FS
1, 1-1/2
10
		
4, 4-1/2
26
27
6, 6-1/2
11
12
13
14
17
9, 9-1/2
30

Optional
X23MC
23RF
23RF
23RF
X23MC
23RF
34MC
34MC
13FS-HS
23RF
27
27-1
34MC
23RF
27
27-1
30SMS
34MC
CU1
X23MC
13FS-HS
TCW1011
SACW1012
SACW1013
T-14MC
D700875ZB
D700875ZB
11FS-24
9RF
11FS-24
10MC
19MC, P-19MC
23RF
27
11
12
13
14
17
16CT

Machine

Original
Optional
KEIL (Con’t)
10, 10-1/2
10
19MC*
25
25
12S, 12-1/2S
27-1
27-1
27
27
		30SMS
		45SMS
12, 12-1/2
26
23RF
13-1/2
26
23RF
15, 15-1/2
34MC
34MC
27
27
15S, 15-1/2S
30SMS
30SMS
		45SMS
JENSEN
MKDC, JMD-4
MDC-2
T-14MC
JMD-5
MDC-8
20MC
MDC-9
22MC
MDC-11
36MC
MDC-12
SMS45
SAGAR
SA100
SA160
SA160
SA200, SA200B
SA260
SA160
SA400
SA460
8UC
SA500, SA500A
SA578RH
57MC
SA589RH
58MC
TAYLOR
KD1
CU1
CU1
29
27
29A
27-1,CU5
KD5,8,9
CU1
CU1
KD10
CU4
13FS-HS
KD20
CU5
CU5
KD40, KD50
CU11
CU11
KD90
16CT
16CT
143MT
CU12
X23MC
144MT
11MC
11MC
145MT
CU12
X23MC
MISCELLANEOUS MANUFACTURERS
Foley Belsaw
6011
6011
Foley Belsaw
6012
6012
Rytan
RY0030
CU11
Yankey
YK1
CU11
Scotsman
22-1
16CT
CEA
80X5X16 (H.S.S)
CU11

ILCO Key Machine Cutter Guide • Revised 6/14

CUTTER REPLACEMENT - SILCA / ILCO ORION
Double Angle Cutters

Milling Slot Cutters

					
Overall				
Inside Edge
				
External
Hole
Cutter		
Cutter
Number
Key Cutting			
Dia.
Dia.
Thickness Cutting
Tip Width
of
Machines
Model
Material (mm)
(mm)
(mm)
Angle
(mm)
Teeth
Ultracode
03
H.S.S
60.4
9.52
6.9
100
1.00
80
Unocode 299 04
H.S.S
60.4
9.52
7.2
85
1.00
72
Unocode 399 DK2
H.S.S
60.4
9.52
8.55
105
0.70
80
UC199
AT-U01
H.S.S
60.4
9.52
5.25
80
0.10
70
		
U01W
Carbide 60.4
9.52
5.25
80
0.10
70
Bravo
P01
H.S.S
80
16.00
5
84
0.15
110
KD50C
P01W
Carbide 80
16.00
5
84
0.15
110
Bravo II/III,
P32 (CU50A) H.S.S
80
16.00
5
84
0.15
110
Rekord, Poker,									
Poker Plus									
Delta 2000,
P21
H.S.S
60.4
9.52
5.25
84
0.15
70
Delta 2000 FO,									
Delta Plus
Cadet, Larus P11
H.S.S
40
7.00
5
84
0.15		

Cutter and Tracer Points for Mechanical Key Cutting Machines*
Dimple Cutters
				
			
Key Cutting				
Cutting
Dia.
Machines
Tracer
Cutter
Material Angle
(mm)
Matrix S/SX/SLX T1
F1
Doge, Doge/C
T6
F6
Club, Club Jr
T7
F7
		
T20
F20
		
T26
F26
		
T55
F55
KD55		
CU55-023
			
CU55-167
KD56
KD56-046 CU56-045
		
KD56-079		
		
KD56-084 CU56-083
		
KD56-162 CU56-158
		
KD56-160 CU56-159
		
KD56-164 CU56-163
		
KD56-088 CU56-087
		
KD56-111 CU56-110
			
CU56-118

H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
Carbide
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S

90
106
72
90
82
90
90
90
100
90
90
80
134
80
90
90
70

0.70
1.00
0.80
0.45
0.80
1.00
0.65
1.00
1.8/2.6
0.80
0.50
1.5/2.1
1.00
2.6/3.3
.80/2.3
.65/3.0
.50/4.0

to Cutter
Tip
(mm)
2.10
2.40
3.75
0.50
0.50
1.00
1.00
0.50

				
Key Cutting			
Machines
Model Material
Delta 2000
SG14
H.S.S
Delta 2000 FO SG15
H.S.S
Delta 2000 AY SG18
H.S.S
Delta Plus
SG19
H.S.S
Targa 2000
SG1
H.S.S
Tech3
SG1W
Carbide
Unocode
05
H.S.S
Unocode 299 06
H.S.S
Unocode 399 05W
Carbide
Ultracode
06W
Carbide

External
Dia.
(mm)
60.4
60.4
64.6
64.6
80
80
60.4
64.6
60.4
64.6

Hole
Cutter Number
Dia. Thickness
of
(mm)
(mm)
Teeth
9.52
1.14
70
9.52
1.14
70
9.52
2.4
40
9.52
1.5
70
22.00
1.5
100
22.00
1.5
100
9.52
1.8
66
9.52
2.4
70
9.52
1.8
66
9.52
2.4
70

0.50
0.50

Laser Cutters

Full
Length
(mm)

# of
Cutting
Edges

Stem
Dia.
(mm)

48
48
48
48
48
48
40
40
40
40
40
40
40
40
40
40
40

1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1

6
6
6
6
6
6
4
4
6
6
6
6
6
6
6
6
6

				
Cutter
Key Cutting				 Length
Machines
Tracer
Cutter
Material (mm)
Matrix S/SX/SLX T8
Matrix II
T11
Doge, Doge/C
T22
Club, Club Jr
T22
057 HS
T30
		
T30
		
T44
		
T44
KD55
KD55-147
		
KD55-149
		
KD55-151
KD56		
		
KD56-047
			
			
		
KD56-117

F8
F11
F22
F22W
F30
F30 (AlTiN)
F44
F44SPL (AlTiN)
CU55-146
CU55-148
CU55-150
CU56-028
CU56-048
CU56-049
CU56-091
CU56-116

H.S.S
H.S.S
H.S.S
Carbide
H.S.S
Carbide
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S
H.S.S

12
5
6
6
6
6
6
6
5.5
9
15
1.5
12
3.5
1.3
6

Full
Length
(mm)
48
48
42
48
48
48
40
40
40
40
40
40
40
40
40
40

Cutting
Dia.
(mm)

# of
Cutting
Edges

4
2
2.5
2
2.5
2
2.5
3
3
2
3
2
2
2
2
2
1.5		
3		
6		
1.5		
3		
1.5		
4		
2.3		

Stem
Dia.
(mm)
6
6
6
6
6
6
6
6
4
4
4
6
6
6
6
6

*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.

ILCO Key Machine Cutter Guide • Revised 6/14

9

Cutter and Tracer Points for Mechanical Key Cutting Machines*
End Milling Cutters
				
Cutter
Key Cutting				 Length
Machines
Tracer
Cutter
Material (mm)
Crown		
Crown (T14)		
Crown (T15)		
KD56
KD56-090

D700772ZB
D704541ZB
D705407ZB
CU56-089

H.S.S
H.S.S
H.S.S
H.S.S

10
13
13
6

Full
Length
(mm)
40
40
40
40

Cutting
Dia.
(mm)

# of
Cutting
Edges

Stem
Dia.
(mm)

5.95
4
3
3
2.5
3
8		

6
6
6
6

*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.

Cutters for Electronic Key Cutting Machines*
Dimple Cutters
				
Key Cutting			
Machines
Cutter
Material
Quattrocode
Triax e.Code
Triax Quattro
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
		
(Engraving Cutter)

H102
W102
H103
W103
H104
W104
W105
W106
H107
W107
W108
W109
W110
H111
W111
H112
W112
W113
W116
W118
W119
W122
W123
W130
W146

H.S.S
Carbide
H.S.S
Carbide
H.S.S
Carbide
Carbide
Carbide
H.S.S
Carbide
Carbide
Carbide
Carbide
H.S.S
Carbide
H.S.S
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide
Carbide

Laser Cutters

Cutting
Angle

Full
Length
(mm)

Cutting
Dia.
(mm)

# of
Cutting
(mm)

Stem
Dia.

106
106
90
90
90
90
90
90
90
90
82
110
30
0
0
60
60
100
90
120
80
90
76
90
60

40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40

1.00
1.00
0.80
0.80
1.20
1.20
0.70
0.60
0.90
0.90
0.90
0.40
0.60
2.75
2.75
1.50
1.50
0.77
1.00
0.60
0.30
0.55
0.90
1.40
0.25

2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2
2
1

6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6

				
Key Cutting			
Machines
Cutter
Material
Quattrocode
Triax e.Code
Triax Quattro
Triax A/T
Tri-Code HS
		
		
		
		

H101
H101 (Al-TiN)
W101
W114
W129
H131
W134
W202
W302

H.S.S
H.S.S.
Carbide
Carbide
H.S.S
H.S.S
Carbide
Carbide
Carbide

Cutter
Length
(mm)

Full
Length
(mm)

Cutting
Dia.
(mm)

# of
Cutting
Edges

Stem
Dia.
(mm)

6
6
6
3
3
5
5
6
6

40
40
40
40
40
40
40
48
40

2.5
2.5
2.5
2
3
6
4
3.5
2

3
3
3
2
3
3
3
3
2

6
6
6
6
6
6
6
6
6

*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.

10

ILCO Key Machine Cutter Guide • Revised 6/14



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16
Create Date                     : 2014:06:17 08:51:04-04:00
Metadata Date                   : 2014:06:17 08:51:10-04:00
Modify Date                     : 2014:06:17 08:51:10-04:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Instance ID                     : uuid:6c9a9536-0ffb-6d45-b569-952323cee97d
Original Document ID            : xmp.did:ED51A8B1DA206811B840CC89F1954320
Document ID                     : xmp.id:57c41d1d-d3cc-4dec-8716-e4e20a4039e3
Rendition Class                 : proof:pdf
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:06:17 08:51:04-04:00
Derived From Instance ID        : xmp.iid:9c551611-415d-4e8f-a183-4c3cd5609867
Derived From Document ID        : xmp.did:ED51A8B1DA206811B840CC89F1954320
Derived From Original Document ID: xmp.did:ED51A8B1DA206811B840CC89F1954320
Derived From Rendition Class    : default
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 10
Creator                         : Adobe InDesign CC (Macintosh)

EXIF Metadata provided by EXIF.tools