Kaba Ilco Key Machine Cutter Guide
User Manual: Kaba Ilco Key Machine Cutter Guide Literature
Open the PDF directly: View PDF 
.
Page Count: 10
ILCO Key Machine Cutter Guide • Revised 6/14 1
Key Machines Key Machine Cutters
A Cross Reference and Replacement Guide
2 ILCO Key Machine Cutter Guide • Revised 6/14
This guide serves as a cross reference and replacement index. Included is a specifica-
tion chart for all cutters currently available from Kaba Ilco Corp. The cutter replacement
guide includes the original cutter as well as optional cutters that may be available for each
machine. Page 8 of this guide provides a cross reference for machines manufactured by
other companies and the Ilco cutters that are available as replacements.
Ilco cutters are carefully designed, made of the finest materials, and thoroughly inspected
for defects in materials or workmanship.
Because cutters are used under conditions over which we have no control, Kaba Ilco Corp.
cannot guarantee nor be held responsible for cutters damaged in use.
Table of Contents
Cutter Styles ..................................................................................................................................................page 3
Cutter Replacement Guide .......................................................................................................................pages 4-6
By Model Cutter Replacement Guide ..................................................................................................... pages 7-8
Cutter Replacement - Silca / Ilco Orion ............................................................................................................ 9-10
ILCO Key Machine Cutter Guide • Revised 6/14 3
1. Slotter - Designed to cut flat steel and safe deposit
keys.
2. Side Milling Slotter - Designed to cut flat steel and
safe deposit keys. This cutter has teeth along its sides
so the key machine can widen cuts with a side to side
cutting motion.
3. Milling - The teeth on a milling cutter are formed using
a grinding or milling machine operation on the basic
cutter blank. Ilco milling cutters are manufactured using
high-quality steels and offer greater durability than
rotary file cutters.
4. Fine Milling - Fine milling cutters are manufactured
using the same technique for milling cutters. They fea-
ture fine, closely spaced teeth, a smooth cutting action,
and greater service life compared to the rotary file-type
cutter.
5 T - Special cutter for side ward cuts on bit keys.
6 Ward - Special cutter for sideward cuts on bit keys.
7. End Mill – When used on certain machines, an end mill
cutter can mill grooves in keys or make cuts in tubular
keys. Some end mill cutters may be used on electronic
machines for cutting edge cut standard automotive
keys (i.e. H158 used with D Clamp on Tri-Code HS).
8. Laser – Designed for cutting sidewinder High Security
keys. On mechanical duplicating machines, a matching
tracer is required.
CUTTER STYLES
1. Slotter 2. Side Milling Slotter
3. Milling
4. Fine Milling
5. T
7. End Mill
6. Ward
8. Laser
4 ILCO Key Machine Cutter Guide • Revised 6/14
Diameter Thickness Hole Diameter Cutter Profile Angle
Ilco
Number Type Material In. mm In. mm In. mm A° B° F In. mm Used on Machines
CUTTER REPLACEMENT GUIDE
F
AB
Note: In the above draw-
ing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example -
.015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measure-
ment is followed by ‘F’ (Ex-
ample - .010F), it means that
the tip of the cutter is .010
wide and is flat.
Cutter Prole
Angles
* Available with Titanium Nitride coating (add prefix “P”) • H. S. S. - High Speed Steel
AT-U01 Milling H.S.S. 2.38 60.4 .207 5.25 .375 9.52 0 80 .004R .10 Ilco EZ®-Code
CU1 Milling H.S.S. 2.25 57.15 .25 6.35 .5 12.7 0 45 .015R .381 Ilco 022, 027, 027A; Taylor KD1, KD1A, KD5, KD6, KD6AG,
KD8, KD9
3FS-HS Slotter H.S.S. 2.5 63.50 .055 1.4 .375 9.52 Ilco 2175-IA, 2177-ID, 2179-IM
3S Slotter H.S.S. 2.5 63.50 .04 1.02 .375 9.52 DL 125, 125A, 126, 126M
4S Slotter H.S.S. 2.25 57.15 .04 1.02 .5 12.7 DL 136, 136D, 146, 146D
CU5 Milling H.S.S. 2.25 57.15 .25 6.35 .5 12.7 0 45 .020 .508 Taylor KD1, KD5, KD6, KD20; Curtis - various models
7FS-HS Slotter H.S.S. 2.5 63.50 .04 1.02 .375 9.52 Ilco 2175-IA, 2177-ID, 2179-IM
8UC Milling H.S.S. 2.375 60.32 .242 6.15 .0375 9.52 45 45 .035F .889 Ilco 2178U, 2178UA, 2178UC
9MC Milling H.S.S. 2.875 73.02 .206 5.23 .5 12.7 30 30 .025R .635 Ilco 016,017,018
P-9MC* Milling H.S.S. 2.875 73.02 .206 5.23 .5 12.7 30 30 .025R .635 Ilco 016,017,018
9RF Fine Milling H.S.S. 2.75 69.85 .25 6.35 .0375 9.52 30 0 .031R .787 Ilco 2175-IA,2177-ID, Keil OF
10FS Slotter H.S.S. 2.5 63.50 .03 .76 .375 9.52 Ilco 2175-IA, 2177-ID, 2179-IM
10MC Milling H.S.S. 2.75 69.85 .28 7.11 .875 22.22 30 30 .018F .45 DL 125A, 128AM, 128SM, 130AM, 132AM, 150AM; Keil 1, 1-1/2
S-10MC Milling H.S.S. 2.75 69.85 .24 6.1 .875 22.23 60 60 .020 .508 DL 125, 126M
11 Slotter H.S.S. 2.063 52.39 .035 .89 .05 12.7 Ilco 2196K; Keil 6-1/2
11FS-24 Slotter H.S.S. 2.781 70.64 .045 1.14 .375 9.52 Ilco 2179-IM: Keil 0, OF
11MC Milling H.S.S. 2.375 60.32 .28 7.11 .5 12.7 30 30 .015F .38 Ilco 024; DL 144M, 144MA; Taylor 144MT
CU11 Milling Cobalt 3.15 80 .197 4.97 .63 16 40 40 Ilco KD40, KD50, KD71; Borkey
12 Slotter H.S.S. 2.063 52.39 .045 1.14 .5 12.7 Ilco 2196K; Keil 6, 6-1/2
13 Slotter H.S.S. 2.063 52.39 .072 1.83 .5 12.7 Ilco 2196K; Keil 6, 6-1/2
13FS-HS Slotter H.S.S. 2.25 57.17 .045 1.14 .437 11.11 Taylor KD10; Segal 815-1815; HPC 6210, 6200, 9310 DKM
14 (14T) T H.S.S. 2 50.80 .440 Wide 11.18 .5 12.7 Ilco 2196K; Keil 6-1/2; Taylor KD10
CU14 Milling Cobalt 2.48 63 .197 5 .63 15 42 42 Ilco KD14
T14MC Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 50 50 .050F 1.27 Ilco Universal II; HPC 1200CM; Lagard LG1011
15FS-HS Slotter H.S.S. 2.5 63.50 .045 1.14 .375 9.52 Ilco 2175-IA, 2177-ID, 2179-IM;
CU15 Slotter H.S.S. 2.498 63 .039 1 .63 16 Ilco KD15
16CT End Mill H.S.S. .187 4.76 Ilco 009; Taylor KD30, KD90
16TW End Mill H.S.S. .236 6 .234 5.95 Ilco 009B
17 Slotter H.S.S. 2.063 52.39 .274 6.96 .5 12.7 Ilco 2196K; Keil 6-1/2
CU18-1 Slotter Carbide 3.15 80 .059 1.5 .866 22 Ilco KD16, KD17, KD18
CU18-2 Slotter Carbide 3.15 80 .039 1 .866 22 Ilco KD16, KD17, KD18
CU18-3 Ward Slotter Carbide 1.26 32 .053 1.35 Ilco KD18
19MC Milling H.S.S. 2.875 73.02 .28 7.11 .5 12.78 30 30 .031R .787 Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10
P-19MC* Milling H.S.S. 2.875 73.02 .28 7.11 .5 12.78 30 30 .031R .787 Ilco 2183DM, 2183HM, 006, 010; Keil 1, 1-1/2, 10
20MC Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 38 38 .070R .178 Ilco 2178U, 2178UA, 2178UC, 178U
CU20 Milling H.S.S. 2.375 60.32 .25 6.35 .5 12.7 0 45 .031R .787 Ilco 020,024A,024B,040,044
P-CU20* Milling H.S.S. 2.375 60.32 .25 6.35 .5 12.7 0 45 .031R .787 Ilco 020,024A,024B,040,044
TCW-20FM Fine Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 38 38 .064F 1.6 Ilco Universal II; HPC 1200CM; Lagard LG1011
21MC Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 39 39 .050 1.27 Ilco 2178U, 2178UA, 2178UC, 178U
ILCO Key Machine Cutter Guide • Revised 6/14 5
Diameter Thickness Hole Diameter Cutter Profile Angle
Ilco
Number Type Material In. mm In. mm In. mm A° B° F In. mm Used on Machines
CUTTER REPLACEMENT GUIDE (Con’t)
F
AB
Note: In the above draw-
ing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example -
.015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measure-
ment is followed by ‘F’ (Ex-
ample - .010F), it means that
the tip of the cutter is .010
wide and is flat.
Cutter Prole
Angles
23RF Fine Milling H.S.S. 2.25 57.15 .25 6.35 .5 12.7 45 0 .031R .787 Ilco 008, 008A, 008B, 2184CD, H2584CV, 2585DU, 190; DL
145, 145M, 147, 149M; HPC 9100, 9110; Taylor KD1, KD5,
KD20; Keil 4-1/2, 12-1/2, 13-1/2, 15; Curtis 2000
X23MC Milling H.S.S. 2.375 60.32 .104 2.64 .5 12.7 0 45 .081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor 143MT,
145MT
P-X23MC* Milling H.S.S. 2.375 60.32 .104 2.64 .5 12.7 0 45 .081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor 143MT,
145MT
X23MC SPL Milling H.S.S. 2.375 60.32 .104 2.64 .5 12.7 0 45 .081F 2.457 Ilco 023, 025, 045; DL 143M,145, 145M, 148M; Taylor
(AlTiN Coated) 143MT, 145MT
25 Slotter H.S.S. 2.5 63.50 .045 1.14 .5 12.7 Keil 10-1/2
27 Slotter H.S.S. 2.25 57.15 .045 1.14 .5 12.7 Ilco 2184CD, 2584CV; DL 146, 146M; HPC 9100, 9110;
Taylor KD1; Keil 4-1/2, 12-1/2
27-1 Slotter H.S.S. 2.25 57.15 .03 .76 .5 12.7 Ilco 2184CD, 2584CV; DL 146, 146M; HPC 9100, 9110;
Taylor KD1; Keil 4-1/2, 12-1/2
27-2 Slotter H.S.S. 2.375 60.32 .03 .76 .5 12.7 Ilco 2585DU; Keil 15-1/2
28RF Fine Milling H.S.S. 2.063 52.39 .25 6.35 .5 12.7 0 45 .025R .635 Ilco 2196K
CU29 Milling H.S.S. 2.375 60.32 .27 6.86 .5 12.7 45 45 .064 1.626 Ilco 029A
SMS30 Side Milling H.S.S. 2.375 60.32 .03 .76 .5 12.7 Ilco 2184CD, 2584CV, H2585SMS; HPC 9110; Keil 12S,
Slotter 12-1/2S, 15S 15-1/2S
CU30-55 Slotter Carbide 4 101.60 .055 1.4 1 25.4 .055 1.4 Ilco 030, 031; PPI Halftime
CU30-55 Slotter Carbide 4 101.60 .055 1.4 1 25.4 .055 1.4 Ilco 030, 031; PPI Halftime
CU30-62 Slotter Carbide 4 101.60 .055 1.4 1 25.4 .062 1.57 Ilco 030, 031; PPI Halftime
CU30-72 Slotter Carbide 4 101.60 .055 1.4 1 25.4 .072 1.83 Ilco 030, 031; PPI Halftime
CU30-88 Slotter Carbide 4 101.60 .055 1.4 1 25.4 .088 2.24 Ilco 030, 031
CU30-M Slotter Carbide 4 101.60 .055 1.4 1 25.4 .050 1.27 Ilco 030, 031; PPI Halftime
32 Slotter H.S.S. 2.063 52.39 .03 .76 .5 12.7 Ilco 2196K; Keil 6-1/2
34MC Milling H.S.S. 2.25 57.15 .25 6.35 .5 12.7 0 45 .031R .787 Ilco 2184CD, 2584CV, 2585DU; Keil 4-1/2, 12-1/2
P-34MC* Milling H.S.S. 2.25 57.15 .25 6.35 .5 12.7 0 45 .031R .787 Ilco 2184CD, 2584CV, 2585DU; Keil 4-1/2, 12-1/2
36MC Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 45 45 .088F 2.24 Ilco 2178U, 2178UA, 2178UC, 178U
37MC Milling H.S.S. 2.25 57.15 .20 5.08 .5 12.7 45 45 .025F .635 Ilco 2184CD, 2585DU; HPC 9100, 9110; DL 135, 135M, 145,
145M; Taylor KD5
CU45 Slotter H.S.S. 2.48 63 .071 1.8 .63 16 Ilco KD45, KD46, KD83
SMS45 Side Milling H.S.S. 2.375 60.32 .045 1.14 .5 12.7 Ilco 046, 046HD, 2584SMS, 2585SMS; HPC 9110;
Slotter Keil 12S, 12-1/2S, 15S, 15-1/2S
P-45SMS* Side Milling H.S.S. 2.375 60.32 .045 1.14 .5 12.7 42 45 .045 1.143 Ilco 046, 046HD, 2584SMS, 2585SMS; HPC 9110;
Slotter Keil 12S, 12-1/2S, 15S, 15-1/2S
TCW-47MC Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 42 45 .035F .889 Ilco Universal II; HPC 1200CM; Lagard LG1011
CU50A Milling Cobalt 3.15 80 .197 5 .63 16 40 40 Ilco KD50A, KD71A, KD50C; Silca Bravo II, Bravo III,
Bravo III w/EZ Jaw
57MC Milling H.S.S. 2.75 69.85 .281 7.14 .5 12.7 0 30 .020 .508 Sagar SA500, SA500A
58MC Milling H.S.S. 2.75 69.85 .281 7.14 .5 12.7 0 30 .020 .508 Sagar SA500, SA500A
* Available with Titanium Nitride coating (add prefix “P”) • H. S. S. - High Speed Steel
6 ILCO Key Machine Cutter Guide • Revised 6/14
Diameter Thickness Hole Diameter Cutter Profile Angle
Ilco
Number Type Material In. mm In. mm In. mm A° B° F In. mm Used on Machines
CUTTER REPLACEMENT GUIDE (Con’t)
F
AB
Note: In the above draw-
ing and chart to the left, ‘F’
refers to the width of the
tip of the cutter, measured
in thousandths of an inch.
When this measurement is
followed by ‘R’ (Example -
.015R), it means that the tip
of the cutter is .015” wide
and it is rounded (or has a
radius). When the measure-
ment is followed by ‘F’ (Ex-
ample - .010F), it means that
the tip of the cutter is .010
wide and is flat.
Cutter Prole
Angles
CU82 Milling Cobalt 3.15 80 .276 7 .63 16 45 45 Ilco KD82
CU84 Slotter H.S.S. 2.48 63 .094 2.4 .63 16 Ilco KD84, KD84A
CU85 Milling Cobalt 2.362 60 .374 9.5 .374 9.53 42.75 42.75 .016 .4 Ilco KD85
TCW-90MC Milling H S. S. 2.375 60.32 .375 9.52 .375 9.52 45 45 .052F 1.32 Ilco Universal II; HPC 1200CM; Lagard LG1011
CU94 End Mill H.S.S. .225 5.72 Ilco KD94, KD95
P-CU100A* Milling H.S.S. 3.15 80 .197 5 .63 16 40 40 Ilco ECM 100
SA160 Milling H.S.S. 2.25 57.15 .281 7.14 .5 12.7 30 30 .032R .813 Sagar SA100, SA200
TCW-1011 Milling H.S.S. 2.375 60.32 .29 7.37 .375 9.52 45 45 .044F 1.12 Ilco Universal II; HPC 1200CM; Lagard LG1011
SACW-1012 Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 43 43 .015F .381 Ilco Universal II; HPC 1200CM; Lagard LG1011
SACW-1013 Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 50 50 .046F 1.17 Ilco Universal II; HPC 1200CM; Lagard LG1011
TCW-1014 Milling H.S.S. 2.375 60.32 .375 9.52 .375 9.52 50 50 .08F 2.032 Ilco Universal II; HPC 1200CM; Lagard LG1011
AM7625 Milling H.S.S. 2.25 57.15 .125 3.18 .5 12.7 0 20 .03R .762 Cole various model
* Available with Titanium Nitride coating (add prefix “P”) • H. S. S. - High Speed Steel
ILCO Key Machine Cutter Guide • Revised 6/14 7
CUTTER REPLACEMENT BY MODEL GUIDE
ILCO
006 19MC P-19MC
008, 008A, 008B 23RF 27 (Slotter)
009, 16CT
009A, 009B 16TW
010 19MC P-19MC
016, 017, 018 P-9MC 9MC
020, 024A, 024B CU20 P-CU20
022 CU1
023, 025 P-X23MC X23MC
045, 045HD P-X23MC X23MC
024 11MC
026 P-45SMS 45SMS, 30SMS
027, 027A CU1
029A CU29
030 CU30-55 CU30-62, -72,
-88, -M
031 CU30-88 CU30-55, -62,
-72, -M
040, 040HD P-CU20 CU20
044, 044HD P-CU20 CU20
046, 046HD P-45SMS SMS45
057 HS F22 F44SPL
ECM 100 P-CU100A
ILCO EZ®-Code AT-U01/U01 D705933ZB
(AL-TiN) Carbide
Universal II T14MC TCW-20FM,
TCW-1011MC TCW-47MC,
TCW-90MC,
TCW1011,
SACW1012,
SACW1013,
SACW1014
2175-IA 9RF or 3FS-HS 7FS-HS, 10FS,
15FS-HS
2177-ID 9RF or 3FS-HS 7FS-HS, 10FS,
15FS-HS
2178U 8UC 20MC, 21MC,
22MC, 36MC
2179-IM 9RF, 7FS-HS, 10FS
3FS-HS 11FS-24,
15FS-HS
2183DM, 2183HM 19MC P-19MC
2184CD 23RF 27, 27-1, 34MC,
P-34MC, SMS30,
37MC, P-45SMS
ILCO (Con’t)
2196K 12, 13, 17, or 32 11, 28RF
2584CV 34MC 27, 27-1,
P-34MC,
37MC, SMS30,
SMS45
H2584CV 34MC P-34MC,
37MC, 45SMS,
2584SMS SMS45 P-45SMS, 27
H2584SMS 27 SMS30,
P-45SMS
2585DU 34MC, 37MC, 27-2, P-34MC ,
45SMS 37MC
2585SMS 30SMS, SMS45 P-45SMS
SILCA
AY 100-C D701652ZB
Bravo D700875ZB
Bravo Master D700875ZB
Bravo USA D700875ZB
Bravo II D717898 CU50A,
D700875ZB
D704861ZB
Requires Carbide
Pulley Set
Bravo III D717898 CU50A,
D700875ZB
D704861ZB
Requires Carbide
Pulley Set
Bravo III (w/EZ-Jaw) D717898 CU50A,
D700875ZB
D704861ZB
Requires Carbide
Pulley Set
Cadet D706766ZB
Club, Club Jr D705488ZB (F22) Various types
Crown D700077ZB D705407ZB
D704541ZB
Delta A/M/S D911868ZR
Delta Multicopy D714448ZB SG19
Delta 2000 FO D913645ZR SG18
Delta Flat Steel D712505ZB (.045)
D412506ZZ (.030)
Delta Plus D911868ZR
Doge D701089ZB (F11) Various types
SILCA (Con’t)
SILCA (Con’t)
Futura D742607ZB (01F)
D742606ZB (01L) D743671ZB (02L)
D743672ZB (03L)
D742267ZB (01D) D743673 (02D)
GT40 D700080ZB
GT 40-C D301744ZZ
Larus D706766ZB
Lancer, Lancer Plus D705374ZB D711119ZB
(Ward Cutter),
D700204ZB
Matrix II D739973ZB (F22) Various types
Matrix S, SX, SLX D705488ZB (F22) Various types
Poker Plus D700875ZB
Prima Laser D709696ZB
Quattrocode D709238ZB (W101) Various types
Rekord 2000, Rekord Plus D700875ZB
Scout D401866ZZ
Special Master D700875ZB
Speed D935282ZR
Sprint D401647ZA
Super Special D700875ZB
Targa 2000 D300080ZB
Tech 3 Europa D700080ZB
Triax D708742ZB AL/TIN-H101
(H101) Cutter
Various types
Triax e.code D708742ZB AL/TIN-H101
(H101) Cutter
Various types
Tri-Code HS D708742ZB) AL/TIN-H101
(H101) Cutter,
D709238ZB
W101,
D709482ZB
W114,
D737688ZB
W302
Ultracode/ D716549ZB D705933ZB
Unocode (U01) Carbide,
various slotters
UC199 D734910ZB
(Carbide)
Machine Original Optional Machine Original Optional
Machine Original Optional
8 ILCO Key Machine Cutter Guide • Revised 6/14
CUTTER REPLACEMENT BY MODEL GUIDE (Con’t)
Machine Original Optional Machine Original Optional Machine Original Optional
ILCO/ORION
KD14 MH234.001 CU14
KD15 (Halley-B) BH238.008 CU15
KD16, KD17 M202.112 CU18-1
M202.116 CU18-2
KD18 M202.112 CU18-1
M202.116 CU18-2
ME205.056 CU18-3
KD45, KD46, KD83 SC235.044 CU45
KD50 MS200.056 CU11
KD50A, KD50C D700875ZB CU50A
KD55 see page 9
KD56 see page 9-10
KD71 MS200.056 Early models
CU11, Later
models CU50A
KD71A CU50A
KD82 DA219.055 CU82
KD84, KD84A SI240.001 CU84
KD85 MD237.039 CU85 or
SACW1012
KD94, KD95 M208.019 CU94
Nova 2000 CU56-048
BORKEY
REXA 1, 11, 111 V8 CU11
954-2 DSB REXA V8 CU11
972 WASTA-TEX V8 CU11
CURTIS
2,2000,3000 CU5 CU5
9 14T
COLE
200, 3K AM7625 AM7625
2277 X23MC
N200 CU5 CU5
DOMINION LOCK
125, 125A, S10-MC S10-MC
126, 126M 3S 3S
128S, 128AM 10MC 10MC
136,146 4S 4S
130AM, 132AM, S10-MC S10-MC
150AM
143M X23MC X23MC
144M 11MC 11MC
DOMINION LOCK (Con’t)
145,145M X23MC X23MC
23RF 23RF
16MC 23RF
147M 23RF 23RF
148M X23MC X23MC
149M 23RF 23RF
16MC 34MC
ESP
1000, 3000, 5000, 660,990 34MC 34MC
HPC
6200,6210 CW33 13FS-HS
9100 CW23RF 23RF
CW16 27
CW39 27-1
CW34MC 34MC
9110 CW23RF 23RF
CW16 27
CW39 27-1
CW30SMS 30SMS
CW34MC 34MC
9120RM, 9220RM CW23RM CU1
9160MC. 9170MC CW23MC X23MC
9319 CW33 13FS-HS
1200MC CW1011 TCW1011
CW1012 SACW1012
CW1013 SACW1013
CW14MC T-14MC
ONE CW80 D700875ZB
THREE CW80 D700875ZB
KEIL
O 24 11FS-24
OF 24 9RF
11FS 11FS-24
1, 1-1/2 10 10MC
19MC, P-19MC
4, 4-1/2 26 23RF
27 27
6, 6-1/2 11 11
12 12
13 13
14 14
17 17
9, 9-1/2 30 16CT
KEIL (Con’t)
10, 10-1/2 10 19MC*
25 25
12S, 12-1/2S 27-1 27-1
27 27
30SMS
45SMS
12, 12-1/2 26 23RF
13-1/2 26 23RF
15, 15-1/2 34MC 34MC
27 27
15S, 15-1/2S 30SMS 30SMS
45SMS
JENSEN
MKDC, JMD-4 MDC-2 T-14MC
JMD-5 MDC-8 20MC
MDC-9 22MC
MDC-11 36MC
MDC-12 SMS45
SAGAR
SA100 SA160 SA160
SA200, SA200B SA260 SA160
SA400 SA460 8UC
SA500, SA500A SA578RH 57MC
SA589RH 58MC
TAYLOR
KD1 CU1 CU1
29 27
29A 27-1,CU5
KD5,8,9 CU1 CU1
KD10 CU4 13FS-HS
KD20 CU5 CU5
KD40, KD50 CU11 CU11
KD90 16CT 16CT
143MT CU12 X23MC
144MT 11MC 11MC
145MT CU12 X23MC
MISCELLANEOUS MANUFACTURERS
Foley Belsaw 6011 6011
Foley Belsaw 6012 6012
Rytan RY0030 CU11
Yankey YK1 CU11
Scotsman 22-1 16CT
CEA 80X5X16 (H.S.S) CU11
ILCO Key Machine Cutter Guide • Revised 6/14 9
CUTTER REPLACEMENT - SILCA / ILCO ORION
Overall Inside Edge
External Hole Cutter Cutter Number to Cutter
Key Cutting Dia. Dia. Thickness Cutting Tip Width of Tip
Machines Model Material (mm) (mm) (mm) Angle (mm) Teeth (mm)
Double Angle Cutters
Delta 2000 SG14 H.S.S 60.4 9.52 1.14 70
Delta 2000 FO SG15 H.S.S 60.4 9.52 1.14 70
Delta 2000 AY SG18 H.S.S 64.6 9.52 2.4 40
Delta Plus SG19 H.S.S 64.6 9.52 1.5 70
Targa 2000 SG1 H.S.S 80 22.00 1.5 100
Tech3 SG1W Carbide 80 22.00 1.5 100
Unocode 05 H.S.S 60.4 9.52 1.8 66
Unocode 299 06 H.S.S 64.6 9.52 2.4 70
Unocode 399 05W Carbide 60.4 9.52 1.8 66
Ultracode 06W Carbide 64.6 9.52 2.4 70
External Hole Cutter Number
Key Cutting Dia. Dia. Thickness of
Machines Model Material (mm) (mm) (mm) Teeth
Milling Slot Cutters
Matrix S/SX/SLX T1 F1 H.S.S 90 0.70 48 1 6
Doge, Doge/C T6 F6 H.S.S 106 1.00 48 1 6
Club, Club Jr T7 F7 H.S.S 72 0.80 48 1 6
T20 F20 H.S.S 90 0.45 48 2 6
T26 F26 H.S.S 82 0.80 48 1 6
T55 F55 H.S.S 90 1.00 48 1 6
KD55 CU55-023 H.S.S 90 0.65 40 1 4
CU55-167 Carbide 90 1.00 40 1 4
KD56 KD56-046 CU56-045 H.S.S 100 1.8/2.6 40 1 6
KD56-079 H.S.S 90 0.80 40 1 6
KD56-084 CU56-083 H.S.S 90 0.50 40 1 6
KD56-162 CU56-158 H.S.S 80 1.5/2.1 40 1 6
KD56-160 CU56-159 H.S.S 134 1.00 40 1 6
KD56-164 CU56-163 H.S.S 80 2.6/3.3 40 1 6
KD56-088 CU56-087 H.S.S 90 .80/2.3 40 1 6
KD56-111 CU56-110 H.S.S 90 .65/3.0 40 1 6
CU56-118 H.S.S 70 .50/4.0 40 1 6
Full # of Stem
Key Cutting Cutting Dia. Length Cutting Dia.
Machines Tracer Cutter Material Angle (mm) (mm) Edges (mm)
Cutter and Tracer Points for Mechanical Key Cutting Machines*
Dimple Cutters Laser Cutters
Matrix S/SX/SLX T8 F8 H.S.S 12 48 4 2 6
Matrix II T11 F11 H.S.S 5 48 2.5 2 6
Doge, Doge/C T22 F22 H.S.S 6 42 2.5 2 6
Club, Club Jr T22 F22W Carbide 6 48 2.5 3 6
057 HS T30 F30 H.S.S 6 48 3 2 6
T30 F30 (AlTiN) Carbide 6 48 3 2 6
T44 F44 H.S.S 6 40 2 2 6
T44 F44SPL (AlTiN) H.S.S 6 40 2 2 6
KD55 KD55-147 CU55-146 H.S.S 5.5 40 1.5 4
KD55-149 CU55-148 H.S.S 9 40 3 4
KD55-151 CU55-150 H.S.S 15 40 6 4
KD56 CU56-028 H.S.S 1.5 40 1.5 6
KD56-047 CU56-048 H.S.S 12 40 3 6
CU56-049 H.S.S 3.5 40 1.5 6
CU56-091 H.S.S 1.3 40 4 6
KD56-117 CU56-116 H.S.S 6 40 2.3 6
Cutter Full Cutting # of Stem
Key Cutting Length Length Dia. Cutting Dia.
Machines Tracer Cutter Material (mm) (mm) (mm) Edges (mm)
*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.
Ultracode 03 H.S.S 60.4 9.52 6.9 100 1.00 80 2.10
Unocode 299 04 H.S.S 60.4 9.52 7.2 85 1.00 72 2.40
Unocode 399 DK2 H.S.S 60.4 9.52 8.55 105 0.70 80 3.75
UC199 AT-U01 H.S.S 60.4 9.52 5.25 80 0.10 70 0.50
U01W Carbide 60.4 9.52 5.25 80 0.10 70 0.50
Bravo P01 H.S.S 80 16.00 5 84 0.15 110 1.00
KD50C P01W Carbide 80 16.00 5 84 0.15 110 1.00
Bravo II/III, P32 (CU50A) H.S.S 80 16.00 5 84 0.15 110 0.50
Rekord, Poker,
Poker Plus
Delta 2000, P21 H.S.S 60.4 9.52 5.25 84 0.15 70 0.50
Delta 2000 FO,
Delta Plus
Cadet, Larus P11 H.S.S 40 7.00 5 84 0.15 0.50
10 ILCO Key Machine Cutter Guide • Revised 6/14
Cutter and Tracer Points for Mechanical Key Cutting Machines*
End Milling Cutters
Crown D700772ZB H.S.S 10 40 5.95 4 6
Crown (T14) D704541ZB H.S.S 13 40 3 3 6
Crown (T15) D705407ZB H.S.S 13 40 2.5 3 6
KD56 KD56-090 CU56-089 H.S.S 6 40 8 6
Cutter Full Cutting # of Stem
Key Cutting Length Length Dia. Cutting Dia.
Machines Tracer Cutter Material (mm) (mm) (mm) Edges (mm)
*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.
Quattrocode H102 H.S.S 106 40 1.00 2 6
Triax e.Code W102 Carbide 106 40 1.00 2 6
Triax Quattro H103 H.S.S 90 40 0.80 2 6
W103 Carbide 90 40 0.80 2 6
H104 H.S.S 90 40 1.20 2 6
W104 Carbide 90 40 1.20 2 6
W105 Carbide 90 40 0.70 2 6
W106 Carbide 90 40 0.60 2 6
H107 H.S.S 90 40 0.90 2 6
W107 Carbide 90 40 0.90 2 6
W108 Carbide 82 40 0.90 2 6
W109 Carbide 110 40 0.40 2 6
W110 Carbide 30 40 0.60 1 6
H111 H.S.S 0 40 2.75 2 6
W111 Carbide 0 40 2.75 2 6
H112 H.S.S 60 40 1.50 2 6
W112 Carbide 60 40 1.50 2 6
W113 Carbide 100 40 0.77 2 6
W116 Carbide 90 40 1.00 2 6
W118 Carbide 120 40 0.60 2 6
W119 Carbide 80 40 0.30 2 6
W122 Carbide 90 40 0.55 2 6
W123 Carbide 76 40 0.90 2 6
W130 Carbide 90 40 1.40 2 6
(Engraving Cutter) W146 Carbide 60 40 0.25 1 6
Full Cutting # of Stem
Key Cutting Cutting Length Dia. Cutting Dia.
Machines Cutter Material Angle (mm) (mm) (mm)
Cutters for Electronic Key Cutting Machines*
Dimple Cutters Laser Cutters
*The cutters shown are the most popular. Contact Kaba Ilco Corp. for the complete line of specialty cutters.
Quattrocode H101 H.S.S 6 40 2.5 3 6
Triax e.Code H101 (Al-TiN) H.S.S. 6 40 2.5 3 6
Triax Quattro W101 Carbide 6 40 2.5 3 6
Triax A/T W114 Carbide 3 40 2 2 6
Tri-Code HS W129 H.S.S 3 40 3 3 6
H131 H.S.S 5 40 6 3 6
W134 Carbide 5 40 4 3 6
W202 Carbide 6 48 3.5 3 6
W302 Carbide 6 40 2 2 6
Cutter Full Cutting # of Stem
Key Cutting Length Length Dia. Cutting Dia.
Machines Cutter Material (mm) (mm) (mm) Edges (mm)
