Kaba 630, 730, 750, 79E, E Plex 2000 And Power Lock Series, Door Preparation Drawing, Von Duprin 9847/9947 IP 513129 (v2) 630 730 750 79e Series Drawing 9847 9947 V2

User Manual: Kaba 630, 730, 750, 79E, E-Plex 2000 And Power-Plex 2000 Lock Series, Door Preparation Drawing, Von Duprin 9847/9947 IP-513129 (v2) Exit Device Operators - Kaba Access & Data Systems

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadKaba 630, 730, 750, 79E, E-Plex 2000 And Power-Plex Lock Series, Door Preparation Drawing, Von Duprin 9847/9947 IP-513129 (v2) 630-730-750-79e-e-plex-2000-and-power-plex-2000-lock-series-door-preparation-drawing-von-duprin-9847-9947-ip-513129-v2
Open PDF In BrowserView PDF
REVISIONS

NOTES:
1- FOR EXIT DEVICE AND MORTISE LOCK CUT-OUT REFER TO EXIT DEVICE MANUFACTURER INSTALLATION INSTRUCTIONS.
2- BACKSET SHOWN FOR REFERENCE ONLY, ADJUST BACKSET TO EXIT DEVICE MANUFACTURER INSTALLATION INSTRUCTIONS.
BACKSET TO BE ADJUSTED TO LOW AND HIGH BEVEL DOOR EDGE AS PER DIAGRAM A TABLE.
3- DIMENSIONS ARE SYMETRICAL ABOUT
UNLESS OTHERWISE NOTED.
4- THIS HOLE ONLY FOR LOCK WITH MESSENGER OR BLUETOOTH.
FOR COMPLETE HOLE PATTERN REFER TO DRAWING DT-515162 OR IP-515162.
5- ALL DIMS ARE IN INCHES/[mm]
±.030 [±0.75]

HOLES

±.010 [±0.25]

ECN

FAIT PAR
MADE BY

DESCRIPTION

BACK SET
SEE NOTE #2

1

13259

ORIGINAL RELEASED FOR PILOT

P.P.

A.T.

2

15719

NOTES ADJUSTED, NEW DESCRIPTION

A.E.

C.D.

LEFT HAND
(LH)

4X
.313 [7,95]
.75 [19,05]

5.125
[130,18]

6.200
[157,47]

LEFT HAND
REVERSE
(LHR)

3.438
[87,31]
1.000

3X
.500

.969
[24,61]

[25,4]

LOW BEVEL EDGE

Y

Y

X

HIGH BEVEL EDGE

BACK SET
AJUSTEMENT
DIMENSION Y

SCALE 1:2

DIMENSIONS CRITIQUES
CRITICAL DIMENSIONS

.032 (0.81mm)

1.50 (38,1mm)

.039 (1,00mm)

NE PAS MESURER SUR LE DESSIN
DO NOT SCALE DRAWING

1.75 (44,5mm)

.046 (1.17mm)

2.00 (50,8mm)

.052 (1,32mm)

DIMENSIONING AND TOLERANCING AS PER
AMERICAN SOCIETY OF MECH ENGINEERS
ASME Y14.5-1994

2.25 (57,2mm)

.059 (1,50mm)

2.50 (63,5mm)

.065 (1,65mm)

2.75 (69,9mm)

.072 (1,83mm)

SYMBOLS:
DEEP
COUNTERBORE
CENTER LINE
DIAMETER
NOT TO SCALE

CE DOCUMENT EST LA PROPRIETE STRICTE DE KABA.
LES DONNEES QU'IL CONTIENT NE PEUVENT ETRE
COPIEES OU DIVULGUEES A UNE TIERCE PARTIE SANS
LE CONSENTEMENT ECRIT DE KABA. CE DOCUMENT
DEVRA ETRE RETOURNE SUR DEMANDE A KABA.
THIS DOCUMENT IS PROPERTY OF KABA. THE DATA
CONTAINED IS PROPRIETARY AND SHALL NOT BE
COPIED OR DISCLOSED TO A THIRD PARTY WITHOUT
WRITTEN CONSENT OF KABA. THIS DOCUMENT WILL BE
RETURNED TO KABA UPON DEMAND.

UNE VERSION FRANCAISE DE CE DOCUMENT
EST DISPONIBLE SUR DEMANDE.

SANS AUTRES SPECIFICATIONS,
LES DIMENSIONS SONT:POUCES [millimètres]
ET S'APPLIQUENT APRÈS FINITION.
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE:INCHES [millimeters]
AND APPLY AFTER FINISH.

TOLERANCES:
THIS DRAWING HAS
SPECIFIC TOLERANCES,
SEE NOTES
CE DESSIN A DES
TOLERANCES SPECIFIQUES,
VOIR LES NOTES

RIGHT HAND
REVERSE
(RHR)

4
N

O
I
S

LHR LOCK

(EXIT DEVICE SIDE)
XXX

OUTSIDE

R
E
V

3.438
[87,31]

DOOR
INSIDE

DOOR
BOTTOM

PROJECTION 3iem ANGLE
THIRD ANGLE PROJECTION

1.25 (31,8mm)

2.750
STANDARD
BACK-SET

REFERENCE

DOOR THICKNESS
DIMENSION X

[12,7]

RIGHT HAND
(RH)

INSIDE

DIAGRAM B
DOOR HANDING

LOCK LEVER

DIAGRAM A - BACK SET AJUSTEMENT FOR 3 BEVEL DOOR

DATE

12AU
2009
21JA
2016

.750
[19,05]
SEE NOTE #4

1.375
[34,93]

DOOR
OUTSIDE

VERIF PAR
CHK'D BY

DOOR
TOP

SPECIFIC TOLERANCES
DISTANCES

REV

DESSINE PAR:
DRAWN BY:

P.PRIEUR 12AU09

CONCU PAR:
DESIGNED BY:

A.TOLEDANO 12AU09

APPROUVE PAR:
APPROVED BY:
MATERIAU / MATERIAL

7301,Decarie Boul
Montreal,QC Canada
H4P 2G7
www.kaba-ilco.com

- -

630, 730, 750, 79E, E-PLEX 2000
AND POWER-PLEX 2000 LOCK SERIES
DOOR PREPARATION DRAWING
VON DUPRIN CONCEALED 9847 / 9947

NOT APPLICABLE
FINITION / FINISH

NOT APPLICABLE
TRAITEMENT THERMIQUE / HEAT TREATMENT

NOT APPLICABLE

FORMAT

B

NO PIECE / PART NO:

NO DESSIN / DRAWING NO:

N/A
ECH
SCALE

SEE VIEWS

IP-513129
PG
SHT

1

DE
OF

2

REVISIONS
SEE PAGE 1

BACK SET
SEE NOTE #2

DOOR
TOP
.750
[19,05]
SEE NOTE #4

1.375
[34,93]

4X
.313 [7,95]
.75 [19,05]

5.125
[130,18]

6.200
[157,47]

3.438
[87,31]

1.000

[25,4]

LOCK LEVER
3.438
[87,31]

3X
.500

.969
[24,61]

DOOR
INSIDE

(EXIT DEVICE SIDE)

DOOR
BOTTOM

O
I
S

[12,7]

R
E

V

DOOR
OUTSIDE

4
N

RHR LOCK

SCALE 1:2

CE DOCUMENT EST LA PROPRIETE STRICTE DE KABA.
LES DONNEES QU'IL CONTIENT NE PEUVENT ETRE
COPIEES OU DIVULGUEES A UNE TIERCE PARTIE SANS
LE CONSENTEMENT ECRIT DE KABA. CE DOCUMENT
DEVRA ETRE RETOURNE SUR DEMANDE A KABA.
THIS DOCUMENT IS PROPERTY OF KABA. THE DATA
CONTAINED IS PROPRIETARY AND SHALL NOT BE
COPIED OR DISCLOSED TO A THIRD PARTY WITHOUT
WRITTEN CONSENT OF KABA. THIS DOCUMENT WILL BE
RETURNED TO KABA UPON DEMAND.

UNE VERSION FRANCAISE DE CE DOCUMENT
EST DISPONIBLE SUR DEMANDE.

7301,Decarie Boul
Montreal,QC Canada
H4P 2G7
www.kaba-ilco.com
FORMAT

B

NO PIECE / PART NO:

NO DESSIN / DRAWING NO:

N/A
FOR COMPLETE TITLE
REFER TO PAGE 1

IP-513129
PG
SHT

2

DE
OF

2
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2016:01:28 11:30:22-05:00
Modify Date                     : 2016:01:28 11:30:22-05:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.389687, 2009/06/02-13:20:35
Metadata Date                   : 2016:01:28 11:30:22-05:00
Document ID                     : uuid:122c5d5a-3d81-4ee0-bcd0-2efd02ea1dc5
Instance ID                     : uuid:3040baf4-ef06-4e98-851d-e26d0183c7c4
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.1
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu