Kaba 630, 730, 750, 79E, E Plex 2000 And Power Lock Series, Door Preparation Drawing, Von Duprin 9847/9947 IP 513129 (v2) 630 730 750 79e Series Drawing 9847 9947 V2

User Manual: Kaba 630, 730, 750, 79E, E-Plex 2000 And Power-Plex 2000 Lock Series, Door Preparation Drawing, Von Duprin 9847/9947 IP-513129 (v2) Exit Device Operators - Kaba Access & Data Systems

Open the PDF directly: View PDF PDF.
Page Count: 2

XXXXXX
B
12
SYMBOLS:
DEEP
COUNTERBORE
CENTER LINE
DIAMETER
NOT TO SCALE
UNE VERSION FRANCAISE DE CE DOCUMENT
EST DISPONIBLE SUR DEMANDE.
CE DOCUMENT EST LA PROPRIETE STRICTE DE KABA.
LES DONNEES QU'IL CONTIENT NE PEUVENT ETRE
COPIEES OU DIVULGUEES A UNE TIERCE PARTIE SANS
LE CONSENTEMENT ECRIT DE KABA. CE DOCUMENT
DEVRA ETRE RETOURNE SUR DEMANDE A KABA.
THIS DOCUMENT IS PROPERTY OF KABA. THE DATA
CONTAINED IS PROPRIETARY AND SHALL NOT BE
COPIED OR DISCLOSED TO A THIRD PARTY WITHOUT
WRITTEN CONSENT OF KABA. THIS DOCUMENT WILL BE
RETURNED TO KABA UPON DEMAND.
TOLERANCES:
THIS DRAWING HAS
SPECIFIC TOLERANCES,
SEE NOTES
CE DESSIN A DES
TOLERANCES SPECIFIQUES,
VOIR LES NOTES
DIMENSIONING AND TOLERANCING AS PER
AMERICAN SOCIETY OF MECH ENGINEERS
ASME Y14.5-1994
NE PAS MESURER SUR LE DESSIN
DO NOT SCALE DRAWING
PROJECTION 3iem ANGLE
THIRD ANGLE PROJECTION
DIMENSIONS CRITIQUES
CRITICAL DIMENSIONS
XXX
DIAGRAM A - BACK SET AJUSTEMENT FOR 3 BEVEL DOOR
DOOR THICKNESS
DIMENSION X
BACK SET
AJUSTEMENT
DIMENSION Y
1.25 (31,8mm) .032 (0.81mm)
1.50 (38,1mm) .039 (1,00mm)
1.75 (44,5mm) .046 (1.17mm)
2.00 (50,8mm) .052 (1,32mm)
2.25 (57,2mm) .059 (1,50mm)
2.50 (63,5mm) .065 (1,65mm)
2.75 (69,9mm) .072 (1,83mm)
LOW BEVEL EDGE
HIGH BEVEL EDGE
2.750
STANDARD
BACK-SET
Y
REFERENCE X
Y
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE:INCHES [millimeters]
AND APPLY AFTER FINISH.
SANS AUTRES SPECIFICATIONS,
LES DIMENSIONS SONT:POUCES [millimètres]
ET S'APPLIQUENT APRÈS FINITION.
1.375
[34,93]
.969
[24,61]
5.125
[130,18]
3.438
[87,31]
3.438
[87,31]
BACK SET
SEE NOTE #2
6.200
[157,47]
.750
[19,05]
SEE NOTE #4
1.000 [25,4]
3 X
.500 [12,7]
4 X
.313 [7,95]
.75 [19,05]
REV ecn DESCRIPTION FAIT PAR
MADE BY VERIF PAR
CHK'D BY DATE
A 11476 ORIGINAL RELEASED P.P. J.T. 21AL
2005
NOT APPLICABLE
ECH
SCALE
SEE VIEWS
PG
SHT
DE
OF
TRAITEMENT THERMIQUE / HEAT TREATMENT
NOT APPLICABLE N/A IP-513129
FINITION / FINISH FORMAT NO PIECE / PART NO: NO DESSIN / DRAWING NO:
NOT APPLICABLE
630, 730, 750, 79E, E-PLEX 2000
AND POWER-PLEX 2000 LOCK SERIES
DOOR PREPARATION DRAWING
VON DUPRIN CONCEALED 9847 / 9947
MATERIAU / MATERIAL
APPROUVE PAR:
APPROVED BY:
- -
CONCU PAR:
DESIGNED BY:
A.TOLEDANO
12AU09
7301,Decarie Boul
Montreal,QC Canada
H4P 2G7
www.kaba-ilco.com
DESSINE PAR:
DRAWN BY:
P.PRIEUR
12AU09
REVISIONS
REV ECN DESCRIPTION FAIT PAR
MADE BY VERIF PAR
CHK'D BY DATE
1 13259 ORIGINAL RELEASED FOR PILOT P.P. A.T. 12AU
2009
2 15719 NOTES ADJUSTED, NEW DESCRIPTION A.E. C.D. 21JA
2016
SPECIFIC TOLERANCES
DISTANCES ±.030 [±0.75]
HOLES ±.010 [±0.25]
NOTES:
1- FOR EXIT DEVICE AND MORTISE LOCK CUT-OUT REFER TO EXIT DEVICE MANUFACTURER INSTALLATION INSTRUCTIONS.
2- BACKSET SHOWN FOR REFERENCE ONLY, ADJUST BACKSET TO EXIT DEVICE MANUFACTURER INSTALLATION INSTRUCTIONS.
BACKSET TO BE ADJUSTED TO LOW AND HIGH BEVEL DOOR EDGE AS PER DIAGRAM A TABLE.
3- DIMENSIONS ARE SYMETRICAL ABOUT UNLESS OTHERWISE NOTED.
4- THIS HOLE ONLY FOR LOCK WITH MESSENGER OR BLUETOOTH.
FOR COMPLETE HOLE PATTERN REFER TO DRAWING DT-515162 OR IP-515162.
5- ALL DIMS ARE IN INCHES/[mm]
LHR LOCK
LOCK LEVER
SCALE 1:2
DOOR
INSIDE
(EXIT DEVICE SIDE)
OUTSIDE
DOOR
DIAGRAM B
DOOR HANDING
RIGHT HAND
(RH)
LEFT HAND
(LH)
OUTSIDE
INSIDE
RIGHT HAND
REVERSE
(RHR)
LEFT HAND
REVERSE
(LHR)
VERSION 4
DOOR
BOTTOM
DOOR
TOP
B
22
UNE VERSION FRANCAISE DE CE DOCUMENT
EST DISPONIBLE SUR DEMANDE.
CE DOCUMENT EST LA PROPRIETE STRICTE DE KABA.
LES DONNEES QU'IL CONTIENT NE PEUVENT ETRE
COPIEES OU DIVULGUEES A UNE TIERCE PARTIE SANS
LE CONSENTEMENT ECRIT DE KABA. CE DOCUMENT
DEVRA ETRE RETOURNE SUR DEMANDE A KABA.
THIS DOCUMENT IS PROPERTY OF KABA. THE DATA
CONTAINED IS PROPRIETARY AND SHALL NOT BE
COPIED OR DISCLOSED TO A THIRD PARTY WITHOUT
WRITTEN CONSENT OF KABA. THIS DOCUMENT WILL BE
RETURNED TO KABA UPON DEMAND.
1.000 [25,4]
3 X
.500 [12,7]
4 X
.313 [7,95]
.75 [19,05]
1.375
[34,93]
.969
[24,61]
5.125
[130,18]
3.438
[87,31]
3.438
[87,31]
BACK SET
SEE NOTE #2
6.200
[157,47]
.750
[19,05]
SEE NOTE #4
REVISIONS
SEE PAGE 1
FOR COMPLETE TITLE
REFER TO PAGE 1
PG
SHT
DE
OF
N/A IP-513129
FORMAT NO PIECE / PART NO: NO DESSIN / DRAWING NO:
7301,Decarie Boul
Montreal,QC Canada
H4P 2G7
www.kaba-ilco.com
SCALE 1:2
DOOR
OUTSIDE
(EXIT DEVICE SIDE)
INSIDE
DOOR
RHR LOCK
LOCK LEVER
DOOR
BOTTOM
DOOR
TOP
VERSION 4

Navigation menu