Kaba Simplex 6000/6200 Changing The Code KAA1157 6000 6200

User Manual: Kaba Simplex 6000/6200 Changing the Code - KAA1157 Simplex 6200 Mechanical Lock - Kaba Access & Data Systems

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadKaba Simplex 6000/6200 Changing The Code - KAA1157 Simplex-6000-6200-changing-the-code-kaa1157
Open PDF In BrowserView PDF
Changing the Code/Combination
Simplex 6200
Note: If your lock is opening on every turn of the knob or lever, except upon entering a code, this may
be a ZERO CODE. Before attempting to remove the lock from the door, refer to the troubleshooting
procedures outlined at bottom of this document for a zero code symptom/solution.

6200 Series FAQ
Changing the Code/Combination

For your security the combination must be changed when the lock is installed. Perform this procedure with the door open.
The factory-set code is 2 and 4 depressed simultaneously release, followed by 3
release. This code should be changed as soon as the lock is installed.
1.
		
2.

Turn the thumbturn to the left (counterclockwise) to the stop position 		
and release. This will clear any random entries from the mechanism.
Enter the existing combination.

3.
		

Gently remove the rubber cap (A) covering the combination change 		
hole and save (see figure 1).

4.
		

Insert the pointed end of the spanner wrench (B) into the combination 		
change hole as shown (see figure 2).

5.

Gently lift up until a slight click is heard or felt. Do not force.

6.

Remove the spanner wrench.

7.
		

Turn the outside thumbturn to the left (counterclockwise) to the stop 		
position and release to clear the old combination.

8.
		
		

Select a new code and write it down (some or all of the buttons may be 		
used for your new code, depressed individually or simultaneously). Each
button may be used only once.

9.
		

With the door open, enter your new code. Depress each button fully and
release. A slight click should be felt as each button is depressed.

10.
		

Turn the thumbturn to the right (clockwise) to the stop position and 		
hold. The latch should retract (see figure 4).

11.

Release the thumbturn.

12.
		

Try to turn the thumbturn to the right (clockwise) again. The thumbturn will not turn
clockwise unless the correct combination is entered.

Note: Excessive force will slip the thumbturn 180°. The slipping mechanism (force-proof clutch) protects the lock’s internal mechanism from forced entry.
13.

Turn the thumbturn to the left (counterclockwise) to the stop position.

This will clear any previously depressed buttons.
14.

Enter the new combination. Turn the thumbturn to the right (clockwise).

The thumbturn should rotate. The latch will be retracted flush with the face plate. The correct
combination must be entered each time you want to unlock the door.
15.

Replace the rubber cap to cover the combination change hole.

Troubleshooting
Symptom/problem: Without depressing any buttons, the outside thumbturn always retracts the
latch when it is turned clockwise.
Cause: Lock is in zero combination.
Solution: Follow the procedure for changing a combination except omit step 2 (do not enter the
existing combination).

KAA1157 0108
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:19887258-c33a-4f8d-9835-c99dd9ff1e0c
Document ID                     : adobe:docid:indd:d6df1559-bf64-11dc-b625-b5eb45d47af5
Rendition Class                 : proof:pdf
Derived From Instance ID        : d6df1558-bf64-11dc-b625-b5eb45d47af5
Derived From Document ID        : adobe:docid:indd:f9f110a2-bec1-11dc-8bea-857120353c38
Manifest Link Form              : ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00
Manifest Placed Y Resolution    : 300.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches
Manifest Reference Instance ID  : uuid:8C013FAEBF6711DCB13DABE2189ABB81, uuid:C6D27441BF6A11DCB13DABE2189ABB81
Manifest Reference Document ID  : uuid:8C013FADBF6711DCB13DABE2189ABB81, uuid:C6D27440BF6A11DCB13DABE2189ABB81
Create Date                     : 2008:01:11 11:40:04-05:00
Modify Date                     : 2008:08:18 15:06:58-04:00
Metadata Date                   : 2008:08:18 15:06:58-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.1)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10716 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.1)
EXIF Metadata provided by EXIF.tools

Navigation menu