Kaiomy Technology NW06-WA54PP PCI Wireless LAN card User Manual WA 54P Pro

Download:
Mirror Download [FCC.gov]
Document ID	1113714
Application ID	mdr3Il9OkAdxp4Ba38/zag==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.09kB (751069 bits)
Date Submitted	2009-05-20 00:00:00
Date Available	2009-05-20 00:00:00
Creation Date	2009-05-18 11:09:33
Producing Software	pdfFactory Pro 3.21 (Windows XP Professional Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	WA-54P Pro.pdf
Document Creator	pdfFactory Pro www.ahasoft.com.tw/FinePrint
Document Author:	Cyber

ENGLISH
User Manual
Model: WA-54P Pro
FCC ID: W8ONW06-WA54PP
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Made in China
Brand Name: KAIOMY
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
Ralink PCI Wireless LAN Adapter User’s Manual
1 Install the driver
a Insert the installation CD into your CD-ROM driver, Double click the icon
to start setup
b click Yes to go on
d click Finish to end the setup
2 Turn off your computer, Plug in your PCI wireless LAN adapter, and then turn
on your computer. it will be recognized and auto installed. Just confirmed it like
below:
3 Make infrastructure connection
Double click the icon in red circle
You will see:
You can click the button Rescan to find which AP is in range, they will show on
the window, choice one you want to connect, and click the button connect, and
click ok to finish the connection operation.
An infrastructure connection is accomplished.
Note, please choose correct channel setting up to your law, for example, ch13 is
permitted in your country, and you set your router at ch13, while you choose
ch1-ch11 (default setting), you will never find the AP, and you will have to
choose ch1-ch13 setting in Advanced page as below
4 Some help information in Rlink Wireless Utility
How to find out your IP address:
How to find out which a WIFI environment you are inside
5 Make Ad-Hoc mode connection
5.1 Make an Ad-Hoc SSID
D
5.2 Setup static IP address for the Ad-Hoc link
A At its property page, double click item Internet Protocol
B You will get
C Fill the IP address blank, example as below:
(TCP/IP)
D Click ok to finish the setup
5.3 Ad-Hoc setup for one point accomplished
5.4 Setup another Ad-Hoc point as step A,B,C,D.
5.5 Ad-Hoc mode link accomplished. And you can visit each other.
Note: To make an Ad-Hoc mode link, Do remember to choice the same
channel, its static IP address should be in the same netsub, and the SSID
should be the same too.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Title                           : WA-54P Pro.pdf
Author                          : Cyber
Creator                         : pdfFactory Pro www.ahasoft.com.tw/FinePrint
Producer                        : pdfFactory Pro 3.21 (Windows XP Professional Chinese)
Create Date                     : 2009:05:18 11:09:33+08:00
Page Count                      : 8

EXIF Metadata provided by EXIF.tools