Kamstrup A S READYAMR3 READy Converter User Manual 15b READyAMR3 UserMan
Kamstrup A/S READy Converter 15b READyAMR3 UserMan
Contents
- 1. 15a_READyAMR3 UserMan
- 2. 15b_READyAMR3 UserMan
15b_READyAMR3 UserMan
User Guide READy Converter · Advanced Kamstrup Water Metering · 1040 Crown Pointe Pkwy, Ste. 320 · Atlanta, GA 30338 · F: +1 (678) 387-3602 · info-us@kamstrup.com READy Converter · Advanced Contents Description What is in the suitcase? Technical data Mechanical data Dimensions Power supply Markings/standards Safety information/disposal FCC Cautions 10 Canadian Compliance Statement 11 Order information 12 Accessories Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 READy Converter · Advanced 1 Description • All-in-one box solution • Flexible converter suitcase for meter reading • Rugged design • Long battery lifetime • Support of Wireless M-Bus Communication, C mode • Support of smartphone/tablet Wireless interface - license free @ 2.4 GHz Part of READy Suite READy Converter, Advanced is part of the READy Suite and is responsible for the automatic data collection from smart water meters equipped with Wireless M-Bus communication READy Suite is a unique standardized Wireless M-Bus solution for easy and fast reading of smart water meters. The reading of the smart water meters takes place using the READy Converters which receives data and sends this to a smartphone/tablet which is responsible for storing the data. Each READy device can contain data from up to 15,000 meters. The direct communication between the smart water meters and READy Converter is based on a comprised one-way communication protocol focusing on fast, safe and robust data communication and long battery lifetime. This comprised communication protocol is called C mode. Due to the optimized Wireless M-Bus communication protocol, the READy Converter advanced can receive data from up to 30 smart water meters per second, making it a perfect drive-by solution. Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 READy Converter · Advanced 2 What is in the suitcase? READy Converter is delivered ready to use in a box containing: • 2 x READy Converter • 2 x whip antenna • 2 x 110 VAC/USB charger • 1 x USB car charger with 2 USB outputs • 2 x USB/micro USB cable • 2 x Mobile holders • 2 x Magnetic roof antenna w/ 118” cable • 1 x quick guide The intuitive quick guide leads you through the installation of the PC software and the smartphone app and shows you how to connect software, app and converter unit with each other. 3 Technical data READy Converter Communication interfaces Meter reading Wireless M-Bus, C mode Data transfer to smartphone/tablet Smartphone/tablet wireless interface Further interfaces Charging Micro USB Optical interface 3 x LED for battery status User interface ON/OFF button Frequencies Wireless M-Bus 912.5 / 915 / 918.5 MHz Wireless reader interface - license free 2.4 – 2.5 GHz Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 READy Converter · Advanced 4 Mechanical data READy Converter LxWxD (in inches) Weight (incl. antenna) IP protection class Antenna plug Charging plug 4.7” x 2.5” x .94” (without whip antenna) 10.8” x 2.5” x .94” (with whip antenna) 5.6 oz IP41 SMA (reversed polarity) Micro USB Suitcase LxWxD Weight IP protection class 14.96” x 10.43” x 6.10” 141 oz IP41 Temperature range Charging Operation Storage Humidity 50 °F – 113 °F 14 °F - +131 °F 32 °F – 140 °F < 85 %, non-condensing 5 Dimensions READy Converter 155 6.1” Antenna 275 10.8” 3 x LED ON/OFF button 120 4.7” Label area 2.5” 65 Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 .94” 24 READy Converter · Advanced 6 Power supply READy Converter 3.6 VDC internal, rechargeable battery Operation time (fully charged) < 8 hours Charging time (fully discharged) 9 hours Charging consumption 500 mW To function optimally, READy Converter must be fully charged at least once every half year. 110 VAC chargers Output 5 VDC/1 A USB car charger Output 2 x 5 VDC/1 A Supported meter types flowIQ® 2100 flowIQ® 3101 7 Markings/standards FCC ID: OUY-READYAMR3 RoHS FCC part 15B FCC part 15C IC: 22376-READYAMR3 8 Safety information/disposal Do not try to disassemble READy Converter. Do not expose READy Converter to open fire. Please return READy Converter to Kamstrup A/S if the above specifications cannot be fulfilled. Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 READy Converter · Advanced 9 FCC Cautions Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC rules. Operation is subject to the following 2 conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help This equipment has been approved for portable operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 0.6” spacing be provided between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. Kamstrup A/S • DRAFT_55121596_B1_US_02.2017 READy Converter · Advanced 10 Canadian Compliance Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux norms CNR exemptes de licence d’Industrie Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1)cet appareil ne doit pas provoquer d’interférences et (2)cet appareil doit accepter toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité de l’appareil. Complies with the Canadian ICES-003 Class B specifications. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This device complies with RSS 247 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. 11 Order information READy Converter Solution (complete) READyConverterI 12 Accessories Magnetic roof antenna, complete 6696 010 Car charger 6696 002 Wall adapter 6696 003 Mobile holder 6696 025 Whip antenna 5005 001 Kamstrup A/S • DRAFT_55121596_B1_US_02.2017
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2017:02:08 09:08:17+01:00 Creator : Adobe InDesign CC 2017 (Windows) Modify Date : 2017:02:08 09:08:36+01:00 Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Metadata Date : 2017:02:08 09:08:36+01:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:6b184370-8a39-482d-8fd8-5e32effd3f59 Original Document ID : xmp.did:15fe0177-19d4-6b4a-8647-a5a116b8b09b Document ID : xmp.id:eb1ba3ec-1281-a04d-a66a-e67dd0706f1b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:4e6081bb-80fd-8044-95b0-af21f48a047d Derived From Document ID : xmp.did:76e628ca-bcd5-0044-9a9c-66066f4535cb Derived From Original Document ID: xmp.did:15fe0177-19d4-6b4a-8647-a5a116b8b09b Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:02:08 09:08:17+01:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 8 Signing Date : 2017:02:08 09:08:36+01:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, ExportEXIF Metadata provided by EXIF.tools