Kamstrup A S READYGW1 RS485transmitter User Manual OUY READYGW1 UserMan

Kamstrup A/S RS485transmitter OUY READYGW1 UserMan

OUY-READYGW1 UserMan

Technical dataCommunication interfaceMeter reading 3-wire RS485, using MODBUS protocolREADy Gateway configuration Optical eye Data transfer to smartphone/tablet Wireless M-Bus, C-mode according to EN13757-4:2013Data transfer to concentrator Wireless M-Bus, C-mode, according to EN13757-4:2013Further interfacesUser interface Optical eye (reading out log data) Display FrequencyWireless M-Bus, C-mode 912.5/915.0/918.5 MHzMechanical dataREADy GatewayLxWxD (inches) 4.8 x 3.5 x 3.5Weight incl. bracket (oz) 23.3IP protection class IP68Bracket for READy GatewayLxWxD (inches) 3.9 x 2.4 x 3.3Weight (oz) 3.2Temperature rangeOperation -4 - +140 °FStorage -40 - +158 °FFlooding temperature +35.6 - +140 °FPower supplyInternal battery supply 2 x D-cell batteries (3.6 VDC)Battery lifetime 6 yearsMarkings/StandardsFCC ID: OUY-READYGW1 RoHS FCC part 15BSafety information/DisposalDo not expose READy Gateway to open fire.Do not short circuit the connector on READy Gateway.Please return READy Gateway to Kamstrup if the above specifications cannot be fulfilled.MaintenanceThe READY gateway must always be properly assembled when cleaning is carried out in order to protect the internal parts of the meter. Use only water when cleaning.Activities including installation, adjustments, putting into service, use, assembly, disassembly and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.READY Gateway - Technical data
Kamstrup A/S • 55121761_B1_US_12.2015Battery replacementWhen you need to replace the batteries you must always use the proper battery replacement kit supplied from Kamstrup. See details for replacement in the manual delivered with the battery replacement kit.Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.During battery replacement, keep battery dry at all time and dispose used batteries according to regulations.The battery voltage is 3.67 V maximum, provided by 2 D-cell (Kamstrup part number 1606064). Minimum operational battery voltage : 3.0 V. A lower voltage is detected as battery low condition. Operation for 24 hours with a low battery condition will be reported by an alarm and is an indication that battery replacement is required.Below 2.7 V the device will cease normal operation and be kept in power down.FCC CautionsCaution: Changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate the equipment.This device complies with Part 15 of the FCC rules.Operation is subject to the following 2 conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected• Consult the dealer or an experienced radio/TV technician for helpOrder informationTop number: READyGateway Type number: 6696XXXXXXXXAccessoriesREADy Converter (Walk-by/Drive-by solution) READyConverterI READy Concentrator (Fixed network solution) READyConcentratorI Battery replacement pack 6699 031Do not dispose the appliance in the trashcan, but according to the regulationsTechnical assistanceTechnical assistance may be obtained from Kamstrup Industrivej 28 DK-8660 SkanderborgPlease visit Kamstrup website for the nearest local representative kamstrup.com/en-en/contactREADY Gateway - Technical data

Navigation menu