Kamstrup A S USBEXT USB Meter Reader User Manual 15 USB Meter Reader UserMan

Kamstrup A/S USB Meter Reader 15 USB Meter Reader UserMan

15_USB Meter Reader_UserMan

Download: Kamstrup A S USBEXT USB Meter Reader User Manual 15 USB Meter Reader UserMan
Mirror Download [FCC.gov]Kamstrup A S USBEXT USB Meter Reader User Manual 15 USB Meter Reader UserMan
Document ID1827769
Application IDqcmQMe2vr3Msw1xFosl+Jg==
Document Description15_USB Meter Reader_UserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize29.39kB (367333 bits)
Date Submitted2012-11-01 00:00:00
Date Available2012-11-01 00:00:00
Creation Date2017-10-29 15:06:29
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-29 15:06:29
Document Title15_USB Meter Reader_UserMan
Document CreatorAdobe InDesign CS6 (Windows)

21. Select “Install the software automatically”, and then click
“Next”.
22. Enter a name for the USB Reader. If you have several USB
Readers, name them all.
23. Create meters, groups and job lists as described in the online
user manual.
The online manual is available under the Help menu in the program
and in Windows under Start –> All Programs –> Kamstrup and from
www.kamstrup.com.
Charging of Power Pack
Before using Power Pack (the battery part), it must be charged. Charge
it with the enclosed charging cable that should be mounted in Power
Pack and the PC, after which the charging will start automatically.
Power Pack is fully charged when the light emitting diode in the middle of the round button on the front of Power Pack emits green light. It
takes approx. 5-8 hours.
55121179_B1_GB_10.2012
USB
Kamstrup Meter Reader
Kamstrup A/S
Industrivej 28, Stilling
DK-8660 Skanderborg
Tel.: +45 89 93 10 00
Fax: +45 89 93 10 01
info@kamstrup.com
www.kamstrup.com
QUICK START
1
FCC Cautions
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
RF Exposure compliance statement: This device may be used in
portable exposure conditions with no restrictions, since the sourcebased time-averaged output power is ≤ 60/f(GHz) mW.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Kamstrup USB Meter Reader
FCC ID: OUY-USBEXT
2
Installation of Software
1. Start the Internet browser and connect to the website www.
kamstrup.com.
2. Under “Online services”, select “USB Meter Reader Software”.
3. Fill in the form and click on “Send”.
4. Click on “Confirm” to continue or “Back” to correct your data.
5. You will receive an e-mail with a link for software download.
6. Click on the link and select “Download”.
7. Select “Run” twice. The program is now saved to your PC.
8. Select “Next ”.
9. When asked, accept the installation of Microsoft ”.Net
Framework”.
Select ”Yes” for allowing .Net to make changes on the
computer.
10. Select language, and click “Next”.
11. Select “Next” twice. Now the program is installed.
12. Windows 7™: Select ”Yes” to allow the installation of the
program.
13. Select “Close” to finish the installation.
14. Select ”Next” to confirm the installation of USB Reader driver.
15. Select ”Execute” to end the installation.
16. Start the program by clicking on the icon on the desktop.
17. Insert the USB in your PC.
18. Windows® XP: Select ”No, not this time” and then ”Next”.
19. Windows® XP: Select “Install the software automatically” and
then “Next”.
20. Windows® XP: Select ”Execute”.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Create Date                     : 2012:10:30 11:07:02+01:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2012:10:30 11:08:39+01:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:10:30 11:08:39+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:bb195d8e-dd5f-4809-9f52-96bbd1ae9b89
Original Document ID            : xmp.did:E96C93FBF596DE11B945F8DE5137F699
Document ID                     : xmp.id:BC7EAEC37822E21183BCEE5360E60938
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:BB7EAEC37822E21183BCEE5360E60938
Derived From Document ID        : xmp.did:0FCF13226B22E21183BCEE5360E60938
Derived From Original Document ID: xmp.did:E96C93FBF596DE11B945F8DE5137F699
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2012:10:30 11:07:02+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : TwoPageLeft
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OUY-USBEXT

Navigation menu