Kan Tsang New Technology Development 3089 Bluetooth Digital Clock Radio User Manual

Kan Tsang Technology Ltd Bluetooth Digital Clock Radio

User Manual

BRANDNAMEKT-3089BTUBTUBTUDIGITAL DUALALARM FM CLOCKRADIO WITH BLUETOOTH AND DUAL USBCHARGING PORTINSTRUCTION MANUALThank you for buying Brandname’s product. Read this manual carefully toget the best performance from this unit.IMPORTANTRead these instructions.Heed all warnings.Follow all instructions.Do not block any ventilation openings, Install in accordance with themanufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.Protect the power cord from being walked on or pinched, particularly atplugs, convenience receptacles, and the point where they exit from theclock radio.Only use attachments/accessories specified by the manufacturer.Unplug this clock radio during lightning storms or when unused for longperiods of time.Refer all servicing to qualified service personnel. Servicing is requiredwhen the clock radio has been damaged in any way, such as power supplycord or plug is damaged, liquid has been spilled or objects have fallen intothe clock radio, the clock radio has been expose to rain or moisture, doesnot operate normally, or has been dropped.This clock radio shall not be exposed to dripping or splashing.Do not place any sources of danger on the clock radio (e.g. liquid filledobjects, lighted candles).Attention should be drawn to the environmental aspects of battery disposal.Don’t throw used batteries in dustbin. Please contact your retailer in orderto protect the environment.Minimum distances around the apparatus for sufficient ventilations( exactdistance of e.g.5 cm should be mentioned);The ventilation should not be impeded by covering the ventilation openingswith items such as newspaper, table-cloths, curtains etc.No naked flame sources such as lighted candles should be placed on theapparatus;The use of apparatus in tropical and /or moderate climates.Attention for adaptor:a. The apparatus shall not be exposed to dripping or splashing and that noobjects filled with liquids, such as vases, shall be placed on apparatus.b. To be completely disconnection the power input, the AC/DC adaptor ofapparatus shall be disconnected from the mains.c. The AC/DC adaptor of apparatus should not be obstructed OR should beeasily accessed during intended use.d. The marking information is located at the bottom of apparatus.e. Battery shall not be exposed to excessive heat such as sunshine, fire or thelike.Electrical products should not be disposal of with household waste. Pleaserecycle where facilities exist. Check with your Local Authority of retailer for
recycling device.(Batteries pack or batteries installed) shall not be exposed to excessive heatsuch as sunshine, fire or the like.LOCATION OF CONTROL1. TIME SET / MEMORY /PLAY/PAUSE 9. AL1 INDICATOR2. DIMMER/ SLEEP/ SCAN 10. PM INDICATOR3. VOLUME + / AL2 11. BLUE TOOTH INDICATOR4. VOLUME - / AL1 12. AL2 INDICATOR5. SNOOZE / NIGHT LIGHT 13. SLEEP INDICATOR6. / FUNCTION 14. DIGITAL DISPLAY7. TUNING DOWN / HOUR / SKIP BACKWARD 15. DC INPUT8. TUNING UP / MINUTE / SKIP FORWARD 16. USB OUT 1A17. FM ANTENNA WIRECONNECT POWERCAUTIONRisk of product damage! Ensure that the power voltage corresponds to the
voltage printed on the back or underside of the clock radio.Risk of electric shock! When you unplug the AC adaptor, always pull the plug fromthe socket. Never pull the cord.BOTTOM OF SETBattery compartment for 1.5 volt (LR6, UM-3, AA) battery 2pcs. (not included) for temporarytime storage.SET TIME1. Press and hold TIME SET for two seconds.2. Preset 24 shows 24 hour mode .3. Press TUNING ＾﹀to select 24 or 12 hour mode .4. Press TIME SET to confirm 24 or 12 hour mode .[0:00] Hour digit is blink or [12:00] Hour digit is blink. .5. Press TUNING ＾to set hour.6. Press TUNING ﹀ to set minute .7. Press TIME SET again to confirm setting or the setting will be confirmed automatically if nobutton is used within 3 seconds.LISTEN TO FM RADIOFor better reception, fully extend and adjust the position of the FM antennawire.1. Press the / FUNCTION to turn on FM radio.[FM frequency] is displayed and FM indicator is light up.2. Press the SCAN/TUNING ＾﹀for two seconds.The FM Tuner tunes to a station with strong reception automatically.To search for a radio station manually :Press the TUNING ﹀＾ repeatedly to tune to a radio stationSTORE FM RADIO STATIONSYou can store up to 20 FM radio stations in preset channel automatically ormanually.STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN)1. Press the / FUNCTION to turn on FM radio.2. Press the SCAN for two seconds.The received stations are automatically stored to preset numbers.
STORE FM RADIO STATIONS MANUALLY.1. Tune to an FM radio station.2. Press the MEMORY TIME SET to activate the storing mode.3. Press the TUNING ＾﹀ to select the preset number.4. Press the MEMORY TIME SET again to store the radio station .[P 01 ~ P 20] is preset station numbers.If this position is occupied, the previous stored frequency will bedisplayed ;To remove a pre-stored FM radio station, store another station in itsplace.LISTEN TO A PRESET FM RADIO STATION1.In FM mode, press MEMORY TIME SET to select a preset number.2. Press the TUNING ＾﹀to select preset station .NoteThe digit display return to clock display if no buttons is pressed for 10 secondsLISTEN TO BLUETOOTH WIRELESS MUSIC STEAMING1. Press / FUNCTION to Bluetooth mode.2. [bt] displays on the screen.3. Bluetooth indicator flashes quickly to wait for Bluetooth enabled device /smartphone to pair it.4. On Bluetooth function at Bluetooth enable device / smartphone.5. Scan KT-3088BTU as device name.6. Select KT-3088BTU on device name list.7. Bluetooth indicator flash slowly after pairing and connecting.8. Playback music or multi-media audio source at the devices / smartphone.9. Press Volume + / - or adjust volume level at the devices / smartphone todesire level.10.Press Backward skip to select previous song.11. Press Forward skip to select next song.12.Press Play/Pause to play or pause the song is being played back.NoteThe digit display returns to clock display if no buttons is pressed for 10seconds
SET ALARM TIMERMake sure that you have set the clock correctly.You can set two separate alarm timers. For the alarm sound, you can selectthe FM radio or the buzzer.1. Press / SCAN to Clock mode.2. Press and hold AL1/AL2 for two seconds.[0:00] Hour digit is blink.3. Press TUNING ＾ to set the alarm hour and TUNING ﹀to set the alarmminute.4. Press AL1/AL2 to confirm setting .5. Press AL1/AL2 again to select a sound source: FM or BUZZER.The current FM radio frequency is blink if FM radio source is selectedand AL1 / AL2 indicator is light up.[bb] is blink if the buzzer sound is selected and AL1 / AL2 indicator islight up.Press AL1/AL2 to off alarm function and AL1/AL2 indicator is off.Press TIME SET to confirm setting or the setting will be confirmedautomatically if no button is used within 3 seconds.SNOOZE / NIGHT LIGHT ON/OFF1. When alarm sounds, press SNOOZE to activate the snooze time 9 minutes.The AL1 / AL2 indicator keeps blinking.2. Press Snooze / Night Light button to on and off the Night Light exceptduring alarm sounds.SET SLEEP TIMER1. Press /SCANtoradiomode.2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly to selectthe sleep timer period (in minutes).When the sleep timer is activated, Sleep indicator is light on.To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP multi-functionbutton repeatedly until back to radio frequency.Sleep Timer period circle as follow :120 > 90 > 60 > 45 >30>15>05
OFFADJUST VOLUMEWhile listening, press + VOLUME – to adjust volume.ADJUST DISPLAY BRIGHTNESSPress and hold DIMMER for 2 seconds repeatedly to select high or low brightness levels.Plug the unit into the USB port on your computer or into a USB power adaptor (notincluded) using the included USB cable.BATTERY BACK-UP(For Temporary Time Storage Only)Install 2 x LR06, AA or EU-3 battery (not included) according to polarity shown inside thebattery compartment. In the event of a power interruption, your set will not work normallyfrom the mains supply but there is now the advantage that your clock will continue to work.The clock display will not light up, as the clock time will be held in the memory. This alsoenables you to move the set from place to place without re-setting the clock every time. Thebattery back-up system is only meant to be used from short temporary power interruption.For longer durations, the battery may become exhausted or there may be some deviation inaccuracy. When the battery is exhausted, it should be removed from the set to preventleakage. If you do not wish to take advantage of the battery back-up system, your set willwork normally without a battery. However, if disconnected from the mains, the clock figureswill flash when the mains are re-connected and you must re-set the clock as described in theElectronic Clock Operation paragraph.Attention should be drawn to the environmental aspects of battery disposal. Don’t throw usedbatteries in dustbin. Please contact your retailer in order to protect the environment.Attention should be drawn to the environmental aspects of battery disposal.Electrical products should not be disposal of with household waste. Please recycle wherefacilities exist. Check with your Local Authority of retailer for recycling device.(Batteries pack or batteries installed) shall not be exposed to excessive heat such as sunshine,fire or the like.SPECIFICATIONPower Source : 100-240V ~50/60HzTuner Range :FM 87.5-108.0MHzUSB Charging : DC 5V, 1A X 1Power Consumption : 5WProduct information is subject to change without prior notice.
FCC Cautions:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:‧Reorient or relocate the receiving antenna.‧Increase the separation between the equipment and receiver.‧Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.‧Consult the dealer or an experienced radio/TV technician for help.Caution: Any changes or modifications to this device not explicitly approved bymanufacturer could void your authority to operate this equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.

Navigation menu