Kandao lightforge KDOZ 3D VR Digital Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3618151
Application ID	VB4p3ZHKKzA+JLUOWe2V4g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	34.56kB (431990 bits)
Date Submitted	2017-10-26 00:00:00
Date Available	2017-10-26 00:00:00
Creation Date	2017-10-12 18:09:02
Producing Software	Adobe PDF library 15.00
Document Lastmod	2017-10-23 19:08:08
Document Title	Obsidian GO遥控器-认证版本
Document Creator	Adobe Illustrator CC 2017 (Windows)

GO Remote
Product description
使用说明书
中文产品说明
目录
一、遥控器部件识别
二、通过遥控器控制相机
2.1
2.2
2.3
2.4
2.5
安装电池和连接相机
拍照
录影
关机
遥控器指示灯状态说明
使用设备前，请仔细阅读本说明书
一、遥控器部件识别
拍照指示灯
电源指示灯
录影指示灯
电源键
拍照键
录影键
蜂鸣器
电池盖
二、通过遥控器控制相机
2.1 安装电池和连接相机
遥控器电池盖抠手的位置取下电池盖
可装取2节7号干电池。
电池
连接相机：
先开启相机, 再任意按摇控
器上的按键, 遥控器启动并
进入连接状态,[电源指示灯]
慢闪直到连接完成后, [电源
指示灯]会灭掉 。
2.2 拍照
短按遥控器[拍照键]
，[蜂鸣器]和[电源指示灯]同
时响应1次，相机进入Timelapse 10秒拍照模式后，遥
控器[拍照指示灯]慢闪提示，再次短按[拍照键]，相机
实现停止拍照功能。
2.3 录像
短按遥控器[录像键]
，[蜂鸣器]和[电源指示灯]
同时响应1次，相机进入录像模式后，遥控器录像指
示灯呈慢闪提示，再次短按遥控器录像键，相机实现
停止录像功能。
2.4 关机
长按遥控器[电源键]
，相机实现关机功能后遥控
器自动进入休眠状态，所有指示灯灭。
遥控器开启状态下，短按遥控器电源键，遥控器进入休眠
模式.再次短按遥控器任意键可实现遥控器唤醒。
2.5 遥控器指示灯状态说明
慢闪
快闪
相机开机状态下，但未
能与遥控器配对未连上
相机低电，相机
不正常工作时
相机拍照中
相机拍照中发生异常，此时
会与电源灯一起闪烁
相机录影中
相机录像中发生异常，此
时会与电源灯一起闪烁
相机与遥控器正常连
接，相机为待机状态
温馨提示：
1. 遥控器只要有按键操作，[电源指示灯]和[蜂鸣器]都会
同时响应；
2．相机如在使用过程中出现故障，遥控器上的[指示灯]会
呈快闪的方式提醒。
Product Description
Table of Contents
1, Remote control
2, Operate with remote control
2.1
2.2
2.3
2.4
2.5
Install the battery & connect with camera
Photograph
Video-record
Power off
Indicator lamp description
Please read the product descripiton
carefully before using the device.
1, Remote control
Photograph
indicator lamp
Power
indicator lamp
Camcorder
indicator lamp
Power button
Photograph button
Camcorder button
Buzzer
Battery cover
2, Operate with remote control
2.1 Assemble the battery and
connect with camera
Open the battery cover of the
remote control, then two AAA
batteries can be installed into
the remote control.
batteries
Switch on camera first,
then press any button on
the remote control to start
connecting, during this
process [power indicator
lamp] will flash slowly, and
then go off after the
connection is done.
2.2 Photograph
Shortly press the [photograph button]
on remote
control, you will hear a buzz as [power indicator lamp]
flashes once. After that,the camera comes into 10-second
time-lapse mode,[photograph indicator lamp] on remote
control will flash slowly,shortly press [photograph button]
again to stop taking photograph .
2.3 Video-record
Shortly press the [camcorder button]
on the
remote control, the buzzer will respond and [power
indicator lamp] will flash once as recording starts. During
the recording process, [camcorder indication lamp] on
the remote control will flash slowly. Shortly press [camera
button] again to end recording.
2.4 Power off
2.5 Indicator lamp description
Slow flash
Camera is on but
disconnected with
remote control
Taking a photograph
Recording a video
Quick flash
Low power/
camera is in
abnormal status
An error has occurred
during taking a
photograph
An error has occurred
during recording a video
Camera is in dormancy
Reminder:
1. In a normal working status, once a button is pressed on
remote control, [power indicator lamp] and [buzzer] will
both respond.
2. If the camera is in abnormal status, all indicator lamps
on the remote control will flash quickly.
FCC Special Statement
FCC Regulatory Information
Warning: changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the
equipment and receiver.
-- Connect the equipment into an outlet on a
circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC ID: 2AMZV-KDOZ
深圳看到科技有限公司
KanDao Technology’s founders and core team members come from
top universities all around the world such as the University of Hong Kong,
Tsinghua University, Hong Kong University of Science and Technology,
National University of Singapore and University of California, San Diego,
with backgrounds in leading technology institutions such as Huawei,
Tencent, Netease, CLP and other well-known enterprises. With strong
research, development, and operational capabilities, Kandao sets a
high international standard in the industry of panoramic virtual reality
video making.
联系我们
GET MORE HELP ( IF YOU NEED IT)
CALL +86-755-26411369
ADD: Unit 5D, Block M7, SinoSteel Building,
Nanshan, Shenzhen, China
深圳市南山区科文路9号中钢大厦
Email: service@kandaovr.com
WEB: www.kandaovr.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:10:12 18:09:02+09:00
Creator                         : Adobe Illustrator CC 2017 (Windows)
Modify Date                     : 2017:10:23 19:08:08+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : Obsidian GO遥控器-认证版本
Metadata Date                   : 2017:10:23 19:08:08+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Thumbnail Width                 : 164
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4823 bytes, use -b option to extract)
Instance ID                     : uuid:1d20d529-ab76-452b-a4d0-ee501f744614
Document ID                     : xmp.did:05510507-2074-684a-a413-300411d0619a
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:eeb46777-9ffa-4c4b-9b27-28350af6c4be
Derived From Document ID        : xmp.did:eeb46777-9ffa-4c4b-9b27-28350af6c4be
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:993309f9-bc00-4741-ae22-5faef943c986, xmp.iid:05510507-2074-684a-a413-300411d0619a
History When                    : 2016:12:13 18:10:27+08:00, 2017:10:12 18:08:53+08:00
History Software Agent          : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 61.304919
Max Page Size H                 : 139.700000
Max Page Size Unit              : Millimeters
Font Name                       : CenturyGothic, CenturyGothic-Bold, SourceHanSansCN-ExtraLight, SourceHanSansCN-Normal, SourceHanSansCN-Bold, SourceHanSansCN-Regular, SimSun, SourceHanSansCN-Light
Font Family                     : Century Gothic, Century Gothic, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, 思源黑体 CN, 宋体, 思源黑体 CN
Font Face                       : Regular, Bold, ExtraLight, Normal, Bold, Regular, 常规, Light
Font Type                       : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 2.35, Version 2.35, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.15, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930
Font Composite                  : False, False, False, False, False, False, False, False
Font File Name                  : Monotype  - Century Gothic_4.ttf, Monotype  - Century Gothic Bold_9.ttf, 思源字体 (6).otf, 思源字体 (3).otf, 思源字体 (5).otf, 思源字体 (4).otf, simsun.ttc, 思源字体 (1).otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : Brights
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000000
Swatch Groups Colorants Magenta : 90.000000
Swatch Groups Colorants Yellow  : 0.003100
Swatch Groups Colorants Black   : 0.003100
Producer                        : Adobe PDF library 15.00
Creator Version                 : 21.0.0
Page Count                      : 12

EXIF Metadata provided by EXIF.tools