Kar Tech MOD190 Modular transceiver User Manual User s manual

Download:
Mirror Download [FCC.gov]
Document ID	3385351
Application ID	+/AtrT70jz79Jldr97MnEQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.92kB (336504 bits)
Date Submitted	2017-05-10 00:00:00
Date Available	2017-05-10 00:00:00
Creation Date	2017-04-18 09:00:31
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-05-08 11:24:15
Document Title	Microsoft Word - User's manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

MOD190
MODULAR TRANSCEIVER
OEM INSTALLATION AND OPERATION MANUAL
NOTE: THIS MODULE IS LIMITED TO OEM INSTALLATION ONLY
DECEMBER 6, 2016
TH
MOD190 TRANSCEIVER
INDEX
DESCRIPTION ........................................................................... 2
OPERATION .............................................................................. 2
INSTALLATION ......................................................................... 4
BEFORE APPLYING POWER! ...................................................... 6
TROUBLESHOOTING ................................................................. 6
TRANSCEIVER PICTORIAL ........................................................ 8
SPECIFICATIONS ...................................................................... 9
INSTRUCTION TO THE USER ................................................... 10
INDUSTRY CANADA STATEMENTS ........................................... 12
MOD190 TRANSCEIVER
DESCRIPTION
The
MOD190
OPERATION
frequency
The
spectrum
transceiver module for the 900
transceiver module designed to
MHz ISM bands. The transceiver
be compatible with US (FCC Part
microcontroller includes a CPU,
15.247) and Canadian (RSS-247)
GPI/O,
regulations for license free use
frequency synthesizer, a power
in the 900 MHz ISM band. The
amplifier, a modulator and a
MOD190 is designed for mobile
receiver
unit.
The
applications
microcontroller
serial
connected
the
hopping
is
spread
in
accordance
to
Part 2.1091(b).
MOD190
is
fully
to
protection circuits.
radio
integrated
MOD190
port
host
is
via
The data is
The MOD190 transceiver is only
sent through a serial port to RF
integrated into Kar-Tech remote
processor and then to RF circuit
control products by Kar-Tech, at
to the antenna and the data
Kar-Tech. There are no user
received from antenna is sent to
serviceable
the serial port and to the host.
parts
on
the
MOD190 transceiver.
The
microcontroller
is
responsible for the control of the
The MOD190 is not designed for
entire
multiple
MOD190 transceiver contains a
and
antenna
should
transmit
not
applications
be
used
simultaneously
communication.
The
to
DC regulator which generates a
with
constant 1.8 VDC for the digital
any other transmitter.
circuitry. The RF section runs on
the 3.3V supply.
MOD190 TRANSCEIVER
synchronization
The MOD190 hops on 50 channel
transmitter’s signals.
frequencies that are selected in
pseudo
random
order.
An
example of the order is:
{48, 25, 17, 20, 41, 37, 36,
10, 15, 44, 30,
5,
8, 28,
6, 42, 33,
1, 23, 49, 16,
19, 29, 21, 43, 31,
27, 22, 45, 13,
14, 46, 12, 24,
3,
9, 18,
2, 32, 11,
4,
7, 38, 4
7, 35, 40, 50, 34, 39, 26}
where Channel 1 is 902.5 MHZ
and Channel 50 is 927.00 MHZ.
The dwell time of the hopping is
350ms. Each channel is used
equally on average.
The receivers are matched to
the transmitters to use the same
hopping channel sequence and
they
hop
channels
with
in
the
MOD190 TRANSCEIVER
INSTALLATION
1) Solder
antenna.
the
MOD190
transceiver directly to the
host’s compatible connector.
2) Print and attach the label
as shown below:
3) Place a label on the outside
of the host enclosure in a
visible area. On the label,
include
the
following:
“Contains
Module
Transmitter
FCC
MOD190”
ID:
and
Transmitter
P4U-
“Contains
Module
IC:
4534A-MOD190”
4) Connect
the
antenna.
Either
wavelength
RPSMA
appropriate
¼
wire,
or
¼
wavelength
MOD190 TRANSCEIVER
Application Requirements:
applications.
See
Part
2.1091 for definitions of
A) Power
the
MOD190
mobile
Transceiver with 3.3VDC
nominal
peak
voltage,
current
F) Do
of
not
operate
MOD190
750mA.
without
the
an
antenna.
B) Do not remove the shield
G) Documentations:
on the MOD190.
host’s
C) If you use something other
than
fixed
applications.
with
draw
and
the
antenna
or
¼
User
the
Manual
include the following:
wave
the
In
a. That there are no user
wire
serviceable
parts
antenna, the unit needs
the
modules.
separate approval.
They
D) The
antenna
should
be
must
all
persons,
not
and
b. The
transmit
antenna
except
accordance
with
“Instructions
To
The User” section.
c. The “Industry Canada
or
transmitter,
not
modules.
simultaneously with any
other
should
remove or install radio
mounted at least 20cm
from
radio
in
Statement”.
in
d. Include in the manual,
FCC
“This device is granted
multi transmitter product
for use in Mobile only
procedures.
configurations
E) The
MOD190
is
to
be
which
installed only in mobile
used
the
for
in
antennas
this
MOD190 TRANSCEIVER
transmitter
must
be
installed to provide a
separation distance of
at least 20cm from all
person and not be colocated with any other
transmitters except in
accordance with FCC
and Industry Canada
multi-transmitter
product procedures.”
BEFORE APPLYING
POWER!
 Check power and ground for
proper polarity.
 Read the rest of this manual.
TROUBLESHOOTING
There are no user serviceable
parts in the MOD190 Transceiver.
Contact
your
representative
KAR-TECH
for
further
instructions or servicing.
PARTS LIST
PART NUMBER
DESCRIPTION
021901A
MOD190 RADIO TRANSCEIVER – WIRE
ANTENNA
021902A
MOD190 RADIO TRANSCEIVER – RPSMA
ANTENNA
There are no user-serviceable parts inside the transmitter or the
receiver. Return the units for service.
The information, specifications, and illustrations in this manual are those in effect at the time of
printing. We reserve the right to change specifications or design at any time without notice.
Part No.
Antenna type
Gain
Remark
021901A
WIRE ANTENNA
0.75dBi
Integral antenna
021902A
RPSMA ANTENNA
1.10dBi
External antenna
Antenna type: External Antenna with reversed polarity non standard antenna port
Photo with wire antenna
Photo with RPSMA ANTENNA
MOD190 TRANSCEIVER
TRANSCEIVER PICTORIAL
MOD190 TRANSCEIVER
SPECIFICATIONS
Equipment Class ............................. Part 15 Spread Spectrum Transmitter
FCC ID:P4U-MOD190
IC:4534A-MOD190
TRANSCEIVER
Power supply ........................................................................... 3.3VDC
Operating temperature - Radio....................................... -40˚C to +85˚C
Storage temperature .................................................. -40˚C to +100˚C
RF Frequency ................................................................ 902.5-927 MHz
RF Receive Sensitivity ............................................................. -126 dBm
MOD190 TRANSCEIVER
INSTRUCTION TO THE USER
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: 1) this device may not
cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Radiation Exposure Statement
The modular can be installed or integrated in mobile or fix
devices only. This modular cannot be installed in any portable
device, for example, USB dongle like transmitters is forbidden.
This modular complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
10
MOD190 TRANSCEIVER
be co-located or operating in conjunction with any other antenna
or transmitter. This modular must be installed and operated with
a minimum distance of 20 cm between the radiator and user body.
If the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into
which the module is installed must also display a label referring to
the enclosed module. This exterior label can use wording such as
the following: “Contains Transmitter Module FCC ID:P4U-MOD190“
when the module is installed inside another device, the user
manual of this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
The devices must be installed and used in strict accordance with
the manufacturer's instructions as described in the user
documentation that comes with the product
11
MOD190 TRANSCEIVER
INDUSTRY CANADA STATEMENTS
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut fonctionner avec une antenne d'un type et d'un
gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie
Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la puissance isotrope
rayonnée quivalente (p.i.r.e.) ne dépassepas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
12
MOD190 TRANSCEIVER
OEM Responsibilities to comply with FCC and Industry Canada
Regulations
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie
Canada . Son fonctionnement est soumis aux deux conditions
suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les
interférences qui peuvent causer un mauvais fonctionnement de
l'appareil.
IC Radiation Exposure Statement
The modular can be installed or integrated in mobile or fix devices only.
This modular cannot be installed in any portable device, for example,
USB dongle like transmitters is forbidden.
This modular complies with IC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter. This
modular must be installed and operated with a minimum distance of
20 cm between the radiator and user body. Cette modulaire doit être
installé et utilisé à une distance minimum de 20 cm entre le radiateur
et le corps de l'utilisateur.
If the IC number is not visible when the module is installed inside
another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module.
This exterior label can use wording such as the following:
“Contains IC: 4534A-MOD190”
when the module is installed inside another device, the user manual of
this device must contain below warning statements;
13
MOD190 TRANSCEIVER
1. This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
2. Cet appareil est conforme aux CNR exemptes de licence d'Industrie
Canada . Son fonctionnement est soumis aux deux conditions
suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence , y compris les
interférences qui peuvent causer un mauvais fonctionnement de
l'appareil.
The devices must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation
that comes with the product.
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2017:04:18 09:00:31+08:00
Modify Date                     : 2017:05:08 11:24:15+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:08 11:24:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - User's manual
Creator                         : Administrator
Document ID                     : uuid:bfdafcfe-d350-4719-a93e-8c7bfc569070
Instance ID                     : uuid:5c26c3c0-1461-4225-b656-9cd1d61d4575
Page Count                      : 15

EXIF Metadata provided by EXIF.tools