Karcher 40 Rs Bp Pack 1 006 129 0 Quick Start Guide OBJ_DOKU 83887 001

Karcher-40-Rs-Bp-1-006-132-0-Quick-Start-Guide karcher-40-rs-bp-1-006-132-0-quick-start-guide

Karcher-40-Rs-Bp-Bc-1-006-135-0-Quick-Start-Guide karcher-40-rs-bp-bc-1-006-135-0-quick-start-guide

Karcher-40-Rs-Bp-Bc-1-006-136-0-Quick-Start-Guide karcher-40-rs-bp-bc-1-006-136-0-quick-start-guide

Karcher-40-Rs-Bp-1-006-131-0-Quick-Start-Guide karcher-40-rs-bp-1-006-131-0-quick-start-guide

Karcher-40-Rs-Bp-Pac-1-006-127-0-Quick-Start-Guide karcher-40-rs-bp-pac-1-006-127-0-quick-start-guide

2014-07-06

: Karcher Karcher-40-Rs-Bp-Pack-1-006-129-0-Quick-Start-Guide karcher-40-rs-bp-pack-1-006-129-0-quick-start-guide karcher pdf

Open the PDF directly: View PDF PDF.
Page Count: 7

DownloadKarcher Karcher-40-Rs-Bp-Pack-1-006-129-0-Quick-Start-Guide OBJ_DOKU-83887-001
Open PDF In BrowserView PDF
QUICKSTART
BR/BD 55/40 RS
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.

Start up

1

A

2

A

B

A Open the cover of the fresh water reservoir.
Fill in fresh water (maximum 60 °C). Leave
sufficient space for the detergent.
Close the cover of the fresh water reservoir.
or
B Connect the hose to the automatic filling
system and open the water supply (max.
60°C).
Monitor the appliance - the automatic filling
system will interrupt the water supply when
the tank is full.
Shut off the water supply and disconnect the
hose from the appliance.

B

3

A

A Unplug the charger from the mains.
B Place the mains cable into the storage
compartment.

B

A Pour in detergent.
B Open fresh water valve.

5.964-039.0 02/11

QUICKSTART
Operation

1

A

B

Starting the machine
A Step on the standing platform.
Do not press the accelerator pedal.
B Release emergency-stop button by turning.
C Set main switch to “1”.

C

2

A

B

Drive forward
A Set the forward drive direction using the drive
direction button at the operator console.
B Set the speed range on the programme
selection switch.
C Press accelerator pedal down slowly.
Release the accelerator pedal, the machine
brakes automatically and stops.

C

3

A

B

Reverse drive
A Set the drive direction to backwards using the
drive direction button at the operator console.
B Set the speed range on the programme
selection switch.
C Press accelerator pedal down slowly.
Release the accelerator pedal, the machine
brakes automatically and stops.

C

4

A

Scrubbing vacuum Eco mode
A Light cleaning intensity
Wet clean the floor and vacuum up dirt water.

5.964-039.0 02/11

QUICKSTART
Operation

5

A

6

A

7

A

Scrubbing suction
A High cleaning intensity
Wet clean the floor and vacuum up dirt water.

Vacuuming
A Suck in the dirt fleet.

Apply detergent solution
A Apply detergent solution to the severelyk
contaminated surface and let it soak in.

Finish operation

1

A

2

A

3

A

B

C

Turn off the appliance
A Set programme switch to step 1 (driving).
B Turn key to "0" and remove it.
C Press emergency-stop button.

Turn off the water supply
A Close the fresh water valve.

B

Emptying the Dirt Water Reservoir
몇 Warning
Please observe the local provisions regarding the
wastewater treatment.
A Take the water discharge hose from the
support and lower above a suited collection
device.
B Then rinse the dirt water tank with clear
water.

5.964-039.0 02/11

1

A

몇

weekly

daily

Maintenance and care

Kärcher Customer Service

QUICKSTART

Warning

Please observe the local provisions
regarding the wastewater treatment.
A Take the water discharge hose
from the support and lower above a
suited collection device.
B Then rinse the dirt water tank with
clear water.
B

2

A

A Open the lock.
Swivel the top of the appliance
forward.
Check and ensure that the top of
the appliance is seated properly on
the wastewater reservoir.

3

A

A Check and clean the waste water
reservoir sieve.

4

A

A Explanin the swimmer in the dirt
water tank and its functioning.

5.964-039.0 02/11

5

A

A

weekly

daily

Maintenance and care

Kärcher Customer Service

QUICKSTART

BD model
A Check brush for wear and tear and
clean it.
If the bristles are as long as the
indicator bristles, they must be
replaced.

BR model
A Check the brushes for wear (bristle
length at least 10 mm), replace if
required.
Check brushes for wear and tear,
clean.

6

A

7

A

A Clean the outside of the appliance
with a damp cloth which has been
soaked in mild detergent.

8

A

A Charge battery.

9

A

A Maintenance to be carried out
every 200 operating hours

B

A Clean vacuum lips in the vacuum
bar and check for wear.
B Clean the suction channel.

5.964-039.0 02/11

QUICKSTART
Troubleshooting

1

2

3

A

B

C

D

E

F

A

Appliance cannot be started
A Step on the standing platform.
Do not press the accelerator pedal.
B Release emergency-stop button by turning.
C Set main switch to “1”.
D Unplug the charger from the mains.
E Battery depleted.
Charge battery.
F Close the solenoid brake. To do this, press
the lever of the solenoid brake all the way up
to the stop.

Device does not drive or drives only slowly
A Release accelerator pedal, turn the key
switch to "0", turn the key switch to "1", press
the accelerator pedal.
B Reset fuse of control system.
C Battery depleted.
Charge battery.

B

C

A

B

C

D

E

F

No or inadequate suction power
A Empty the dirt water reservoir.
B Reset fuse of suction turbine.
C Clean the seals between dirt water reservoir
and top of the appliance and check for leaks,
replace if required.
D Clean the vacuum lips on the vacuum bar,
turn or replace if required
E Check suction hose for blockages; clean if
required.
Check connection between suction hose and
suction bar and suction hose and wastewater
tank.
F Clean the floater in the dirt water tank.
G Check and clean the waste water reservoir
sieve.

G

5.964-039.0 02/11

QUICKSTART
Troubleshooting

4

A

5

A

The battery indicator blinks
A Charge battery.

A

B

Insufficient cleaning result

BD model
A Check brush for wear and tear and clean it.
If the bristles are as long as the indicator bristles, they must be replaced.

BR model
A Check the brushes for wear (bristle length at
least 10 mm), replace if required.
Check brushes for wear and tear, clean.
B Charge battery.

6

A

B

Brushes do not turn
A Reset fuse of brush drive.
B Charge battery.

7

A

B

No or very little detergent solution gets added
A Check level of detergent solution in the fresh
water tank; refill, if required.
B Open fresh water valve.

8

A

The cleaning head is not lowered.
A Reset fuse of control system.

5.964-039.0 02/11



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2011:05:24 16:13:03+02:00
Create Date                     : 2010:06:23 16:51:01Z
Metadata Date                   : 2011:05:24 16:13:03+02:00
Format                          : application/pdf
Title                           : OBJ_DOKU-83887-001.fm
Creator                         : awx0127
Document ID                     : uuid:230404d1-9809-43c1-8cab-0e4598013aad
Instance ID                     : uuid:ef68a3a2-c579-461a-b249-ae8650a728fb
Page Mode                       : UseOutlines
Page Count                      : 7
Author                          : awx0127
EXIF Metadata provided by EXIF.tools

Navigation menu