Kasda Networks KA300 Wireless Router User Manual KA300 Manual NEW SOFT
Kasda Networks inc Wireless Router KA300 Manual NEW SOFT
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2367041 |
| Application ID | zd5vYAeQ2GxIIyWtmjPe9A== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 167kB (2087550 bits) |
| Date Submitted | 2014-08-22 00:00:00 |
| Date Available | 2014-08-22 00:00:00 |
| Creation Date | 2017-10-21 11:33:03 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-21 11:33:03 |
| Document Title | KA300 Manual NEW SOFT .doc |
| Document Creator | KA300 Manual NEW SOFT .doc - Microsoft Word |
| Document Author: | kasdad |
www.kasda.cc Kasda Digital Technology Co.,Ltd KA300 Wireless Router User Manual NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. All rights are reserved. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware will work properly in all environments and applications, and makes no warranty or representation, either expressed or implied, with respect to the quality, performance, merchantability, or fitness for a particular purpose of the software or documentation. The manufacturer reserves the right to make changes to the hardware, software, and documentation without obligation to notify any person or organization of the revision or change. All brand and product names are the trademarks of their respective owners. © Copyright 2014 All rights reserved. KA300 Wireless Router User Manual FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: KA300 Wireless Router User Manual FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. KA300 Wireless Router User Manual Content INTRODUCTION ...................................................................................................................... 3 1.1 MAIN FEATURES............................................................................................................... 3 1.1.1 Wireless ................................................................................................................................3 1.1.2 Network Protocol and Features ...........................................................................................3 1.1.3 Firewall................................................................................................................................3 1.1.4 Management Support ...........................................................................................................4 1.1.5 Operating System Support ...................................................................................................4 1.1.6 Environmental......................................................................................................................4 1.2 PACKET CONTENTS ........................................................................................................ 4 1.3 SYSTEM REQUIREMENTS .................................................................................................. 4 1.4 FACTORY DEFAULTS ...................................................................................................... 5 1.5 WARNINGS AND CAUTIONS ............................................................................................. 5 HARDWARE DESCRIPTION .................................................................................................. 6 HARDWARE INSTALLATION ............................................................................................... 7 PC CONFIGURATION GUIDE .............................................................................................. 8 4.1 LOCAL PC CONFIGURATION IN WINDOWS 95, 98, ME, XP................................................ 8 4.2 LOCAL PC CONFIGURATION IN WINDOWS 2000 ............................................................... 9 4.3 LOCAL PC CONFIGURATION IN WINDOWS VISTA ............................................................. 9 4.4 LOCAL PC CONFIGURATION IN WINDOWS 7................................................................... 10 QUICK SETUP OF THE ROUTER ........................................................................................ 10 WEB-BASED BASIC MANAGEMENT GUIDE .................................................................... 14 6.1 HOME PAGE BASIC SETTING ............................................................................................. 14 6.1.1 6.1.2 6.1.3 6.2 PARENTAL CONTROL ..................................................................................................... 18 6.3 ADMINISTRATION ........................................................................................................... 19 6.3.1 6.3.2 6.3.3 6.3.4 Network (WANSettings) .....................................................................................................14 LAN Settings ......................................................................................................................16 Wireless Settings ................................................................................................................18 Time setting ........................................................................................................................19 Password: ..........................................................................................................................20 Backup/restore/reset ..........................................................................................................20 Firmware update................................................................................................................21 WEB-BASED ADVANCE MANAGEMENT GUIDE ............................................................ 22 7.1 SETUP ............................................................................................................................ 22 7.1.1 WAN setup..........................................................................................................................22 7.1.2 LAN setup........................................................................................................................25 7.1.3 IPV6 ...................................................................................................................................26 7.1.4 Advanced Routing Setup .................................................................................................27 7.2 WIRELESS SETUP............................................................................................................ 28 7.2.1 7.2.2 Wireless Basic Settings ......................................................................................................28 Guest Access ......................................................................................................................29 KA300 Wireless Router 7.2.3 7.2.4 7.2.5 7.2.6 User Manual Security ..............................................................................................................................30 WPS Setup ..........................................................................................................................31 Wireless Access Setup ........................................................................................................32 WDS Setup .........................................................................................................................33 7.3 SERVICE – QOS SETUP .................................................................................................. 36 7.4 SECURITY SETUP .......................................................................................................... 37 7.4.1 7.4.2 7.4.3 7.4.4 Firewall setup ....................................................................................................................37 URL Setup ..........................................................................................................................38 Remote Access Setup .........................................................................................................38 DoS ....................................................................................................................................39 APPENDIX: FREQUENT ASKED QUESTIONS...................................................................... 40 KA300 Wireless Router User Manual 1 Introduction Thank you for choosing our product. The KA300 Wireless Router uses Broadcom’s CPE solution that fully complies with IEEE802.11b/g/n standards. It will provide your SOHO with convenient Internet. 1.1 Main Features 1.1.1 Wireless Fully IEEE 802.11b /g /n Wireless data rate up to 300 Mbps Operating in the unlicensed 2.4 GHz ISM band Supports 64/128 bits WEP, WPA, WPA2, WPA/WPA2-PSK, 802.1x compatible. 1.1.2 Network Protocol and Features l Ethernet to ADSL Self-Learning Transparent Bridging Internet Control Message Protocol (ICMP) IP Static Routing Routing Information Protocol (RIP, RIPv2) Network Address Translation (NAT) Virtual Server, Port Forwarding Dynamic Host Configuration Protocol (DHCP) DDNS Simple Network Time Protocol (SNTP) Parent control Built-in NAT MAC Filtering Packet Filtering Stateful Packet Inspection (SPI) 1.1.3 Firewall KA300 Wireless Router User Manual Denial of Service Prevention (DoS) DMZ 1.1.4 Management Support l Web Based GUI Upgrade or update via FTP/HTTP Command Line Interface via Telnet Diagnostic Test Firmware upgrade-able for future feature enhancement 1.1.5 Operating System Support l WINDOWS 98/SE/ME/2000/XP/VISTA/7 Macintosh LINUX 1.1.6 Environmental l Operating humidity: 10%-90% non-condensing 1.2 Non-operating storage humidity: 5%-95% non-condensing Packet Contents The packet contents are as the following: l ROUTER x1 l Power Adapter x1 l Ethernet Cable x1 l CD x1 1.3 System Requirements Broadband Internet Access Service (DSL/Cable/Ethernet) l One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet) l PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors KA300 Wireless Router User Manual l TCP/IP protocol on each PC 1.4 Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari Factory Defaults The device is configured with the following factory defaults: 1.5 IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Warnings and Cautions never use the product near water. To prevent dangerous overloading of the power circuit, be careful about the designed maximum power load ratings. Not to follow the rating guideline could result in a dangerous situation. Please note that telephone line on modem must adopt the primary line that directly outputs from junction box. Do not connect Router to extension phone. In addition, if your house developer divides a telephone line to multi sockets inside the wall of house, please only use the telephone that has connected with the splitter of ADSL Router when you access the Internet. Under the above condition, if you also install telephone with anti-cheat-dial device, please pull out this kind of telephone, otherwise ADSL Router may occur frequently off-line. KA300 Wireless Router User Manual Hardware Description Front Panel LED Color Function Blue Off: Power Not Supplied On: Power Supplied Blue On: The WAN port has detected a link with an attached device Blinking: Data is being transmitted or received by the WAN port Off: No WAN link via the WAN port On: LAN link established and active via LAN port Blue Blue Blinking: ADSL data activity occurs Off: No LAN link via LAN port On: The wireless module is ready and idle Blinking: Data transmitting or receiving over WLAN Off: The wireless function is off On: WPS connection is established Blue Blinking: Trying to establish a WPS connection Off: WPS function is off or no WPS connection KA300 Wireless Router User Manual Rear panel Port WAN ETH1,2,3,4 RESET WPS Function Connect the device to a cable or DSL modem Connect the device to your PC's Ethernet port, or to the uplink port on your hub/switch, using a RJ-45 cable System reset or reset to factory defaults On: WPS connection is established Blinking: Trying to establish a WPS connection Off: WPS function is off or no WPS connection ON/OFF Switch it on or off POWER Connect to the supplied power adapter 3 Hardware Installation This chapter shows you how to connect Router. Meanwhile, it introduces the appropriate environment for the Router and installation instructions. 1. Using an Ethernet Cable to connect the WAN port of the ROUTER to a cable or DSL modem. 2. Using an Ethernet Cable to connect the LAN port of the ROUTER to your LAN or a PC with network card installed. KA300 Wireless Router User Manual 3. Connect the power cable to the PWR connector on ROUTER, then plug in the power adapter to the AC power outlet, and then press the on-off button. PC Configuration Guide 4.1 Local PC Configuration in Windows 95, 98, ME, XP 1. In the Windows task bar, click the “Start” button, point to “Settings”, and then click “Control Panel”. 2. Double-click the “Network” icon. 3. On the “Configuration” tab, select the TCP/IP network associated with user’s network card and then click “Properties”. 4. In the “TCP/IP Properties” dialog box, click the “IP Address” tab. Set the IP address as 192.168.1.x (x can be a decimal number from 2 to 254.) like 192.168.1.2, and the subnet mask as 255.255.255.0. KA300 Wireless Router 5. User Manual On the “Gateway” tab, set a new gateway as 192.168.1.1, and then click “Add”. 6. Configure the “DNS” tab if necessary. For information on the IP address of the DNS server, please consult with user’s ISP. 4.2 7. Click “OK” twice to confirm and save user’s changes. 8. User will be prompted to restart Windows. Click “Yes”. Local PC Configuration in Windows 2000 1. In the Windows task bar, click the “Start” button, point to “Settings”, and then click “Control Panel”. 2. Double-click the “Network and Dial-up Connections” icon. 3. In the “Network and Dial-up Connections” window, right-click the “Local Area Connection” icon, and then select “Properties”. 4. Highlight “Internet Protocol (TCP/IP)”, and then click “Properties”. 5. In the “Internet Protocol (TCP/IP) Properties” dialog box, set the IP address as 192.168.1.x (x can be a decimal number from 2 to 254.), and the subnet mask as 255.255.255.0 and the default gateway as 192.168.1.1. Then click “OK”. 6. Configure the “DNS” tab if necessary. For information on the IP address of the DNS server, please consult with user’s ISP. 7. 4.3 Click “OK” twice to confirm and save user’s changes. Local PC Configuration in Windows Vista 1. Go to Start. Click on Network. 2. Then click on Network and Sharing Center at the top bar. 3. When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window column. 4. Select the Local Area Connection, and right click the icon to select Properties. 5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. KA300 Wireless Router User Manual 6. In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. 7. Click OK again in the Local Area Connection Properties window to apply the new configuration. 4.4 Local PC Configuration in Windows 7 1. Go to Start. Click on Control Panel. Then click on Network and Internet. 2. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. 3. Select the Local Area Connection, and right click the icon to select Properties. 4. Select Internet Protocol Version 4(TCP/IPv4) then click Properties. 5. In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. 6. Click OK again in the Local Area Connection Properties window to apply the new configuration. Quick Setup of the Router In order to use the web-based management software, it will be necessary to use a computer that occupies the same subnet as the Router. The simplest way to do this for many users will be to use DHCP server that is enabled by default on the Router. please make sure the wan connection is ok. Internet Connection Setup Wizard will guide you through a step-by-step process to configure your router and connect to the Internet.ill guide you through a step-by-step process to configure your router and connect to the Internet. 10 KA300 Wireless Router User Manual (1) Launch a web browser, such as Internet Explorer, and then use http://192.168.1.1 to log on to the setting pages. Enter username “admin” and password “admin”, then click “OK”. (2) After log on ,you will see the following page. When WAN connection is ok 11 KA300 Wireless Router User Manual (3) The WAN connection type will appear, the quick setup supports two popular mode PPPoE, DHCP(Dynamic IP) to connect to the internet,If the connection type is PPPoE , enter the username and password provided by your ISP. If the connection type is dynamic IP, the router will obtain an IP automatically from you ISP. Wireless is enabled by default. please enter SSID and Password for wireless network Then click “next”. 12 KA300 Wireless Router User Manual (4)The Internet Connection Setup Wizard is complete. Click the Apply button to save and apply your settings. After the configuration above 13 KA300 Wireless Router User Manual Web-based basic Management Guide This chapter will introduce how to configure your router in detail 6.1 home page basic setting 6.1.1 Network (WANSettings) KA300 supports three types WAN connection.they are DHCP,Static IP,PPPOE, Select any of them you will be able to configure the corresponding connection of WAN. Click icon 14 the KA300 Wireless Router User Manual ² DHCP connection type If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatically get IP parameters including IP address, Subnet Mask, Default Gateway, from your ISP. You can see the page as follows ., Click the Save Settings button to save your settings. ² Static IP If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Static IP. The Static IP settings page will appear. 15 KA300 Wireless Router User Manual IP Address: Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask: Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0. Default Gateway:(Optional) Enter the dotted-decimal notation provided by your ISP. gateway IP ddress in DNS1/DNS2(Optional) /DNS3(Optional) : Enter one or two DNS addresses in dotted-decimal notation provided by your ISP. Click the Save button to save your settings. ² PPPOE If your ISP provides a PPPoE connection, select PPPoE option. And you should enter the following parameters. User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. Click the Save button to save your settings. 6.1.2 LAN Settings Click (any lan port is OK) icon,you can configure the IP parameters of the LAN on the screen as below. 16 KA300 Wireless Router User Manual Local IP Address:Enter the IP address of your Router or reset it in dotted-decimal notation (factory default: 192.168.1.1). DHCP Server:Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually. Start IP Address:Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.1.100 is the default start address. End IP Address:Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.1.150 is the default end address. Click the Save button to save your settings. Note: 1) If you change the IP Address of LAN, you must use the new IP Address to log in the Router. 2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP server will change accordingly at the same time 17 KA300 Wireless Router User Manual 6.1.3 Wireless Settings Cliick icon,you can configure the basic settings for the wireless network of 2.4GHz on this page. Wireless enable :Enable or disable the Wirless function here. Network Name 1. In the [Service Name] column, select the client whose network usage you want to control. You may also key in the clients MAC address in the [Local MAC] column. 2. In the [Add / Delete] column, click the Edit icon. 18 KA300 Wireless Router 3. User Manual Set up allowed time limits in the [Time Settings] map. Drag and drop to desired day/time. 6.3 Administration 6.3.1 Time setting This page allows you to set the time manually or to configure automatic time synchronization. The Router can automatically update the time from an NTP server via the Internet. Time Zone - Select your local time zone from this pull-down list. Time Servers - Select the time servers.You can choose the place where you are.Or select Custom to configure the servers by yourself. Time will show up on the page(Advanced--Status--Status,Current Time). Note: After you have made your changes, Click Save to apply the changes. 19 KA300 Wireless Router User Manual 6.3.2 Password: It is strongly recommended that you change the factory default user name and password of the Router. All users who try to access the Router's web-based utility will be prompted for the Router's user name and password. 6.3.3 Backup/restore/reset Click the Backup button to save all configuration settings to your local computer as a file. Click the Browse button to find the configuration file which you want to restore. Click the Upload button to update the configuration with the file whose path is the one you have input or selected in the blank. 20 KA300 Wireless Router User Manual Click the Reset Defaults button to reset all configuration settings to their default values. Click Browse/Choose and select the firmware upgrade file. Then click Start Upgrade. Warning: Upgrading firmware may take a few minutes; please don't turn off the power or press the reset button. Upgrade must not be interrupted!! 21 KA300 Wireless Router User Manual 7 Web-based Advance Management Guide This chapter will introduce how to configure your router advanced 7.1 Setup Click advanced menu 22 KA300 Wireless Router User Manual ² WAN Connection Type (1) Automatic Configuration – DHCP If you connect using a dynamic IP address or cable modem, keep the default: Automatic Configuration - DHCP. (2) Static IP . To use a fixed IP address to connect to the Internet, select Static IP. Internet IP Address – Enter the IP address provided by your ISP. Subnet Mask – Enter the subnet mask provided by your ISP. Default Gateway – Enter the gateway IP address provided by your ISP. DNS 1-3 – Enter the DNS (Domain Name System) server IP address(es) provided by your ISP. (3) PPPoE If you use a DSL or PPPoE connection, select PPPoE. Username – Enter the username provided by your ISP. Password – Enter the password provided by your ISP. 23 KA300 Wireless Router User Manual Service Name (Optional) – Enter the Service Name, if required by your ISP. Connect on Demand: Max Idle Time – You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates.The default is 15 minutes. Keep Alive: Redial Period – This option keeps you connected to the Internet indefinitely, even when your connection sits idle. To use this option, click the radio button next to Keep Alive. The default Redial Period is 30 seconds (in other words, the router will check the Internet connection every 30 seconds). Host Name (Optional) – Enter a host name for the Router, if required by your ISP. Domain Name (Optional) – Enter a domain name for the Router, if required by your ISP. MTU – MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. Keep the default setting, Auto, to have the router select the best MTU for your Internet connection. To specify a MTU size, select Manual, and enter the value desired (default is 1400). You should leave this value in the 1200 to 1500 range. ² MAC Address Clone The router's MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs require that you register the MAC address of your network card/adapter, which was connected to your cable or DSL modem during installation. 24 KA300 Wireless Router User Manual To clone your network adapter's MAC address onto the router, select Enable and enter your adapter's MAC address in the Clone WAN MAC field or click Get My PC's MAC to fill in the MAC address of your PC you are using. Then save your changes by clicking on the Apply button. 7.1.2 LAN setup ² Router IP Local IP Address / Subnet Mask: This is the router IP Address and Subnet Mask as seen on the internal LAN. The default value is 192.168.1.1 for IP Address and 255.255.255.0 for Subnet Mask. ² Network Address Server setting(DHCP) DHCP Server – Keep the default, Enable, to enable the router's DHCP server option. If you already have a DHCP server on your network or you do not want a DHCP server, then select Disable. Maximum DHCP Users – Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. The absolute maximum is 253, possible if 192.168.1.2 is your starting IP address. Client Lease Time – Enter the length of time, in minutes, that a DHCP client will be allowed to use a dynamic IP address. The default is 0 minutes, which means one day. After this time is up, the client will be automatically assigned a new dynamic IP address, or the lease will be renewed. 25 KA300 Wireless Router User Manual DHCP Reservation:DHCP Reservation is usefull for controlling access of specific computers in the LAN. 7.1.3 IPV6 ² WAN Set IPv6 WAN Network Prefix – Sets the IPv6 Network Prefix for WAN. ² LAN Set IPv6 LAN Network Prefix – Sets the IPv6 Network Prefix for LAN. IPv6 DNS Server – Sets the IP addresses of the DNS servers to use for resolving host names. IPv6 6to4 subnet ID – Sets the 6to4 subnet ID(0-65535). 26 KA300 Wireless Router User Manual 7.1.4 Advanced Routing Setup Static Routing A static route is a pre-determined pathway that network information must travel to reach a specific host or network. To set up a static route between the router and another network: 1.Select a number from the Static Routing drop-down list. 2.Enter the following data: • Destination IP Address – The Destination IP Address is the address of the network or host to which you want to assign a static route. • Subnet Mask– The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion. • Gateway – This is the IP address of the gateway device that allows for contact between the router and the network or host. 3.Depending on where the Destination IP Address is located, select LAN & WLAN or WAN from the Interface drop-down menu. 4.Click the Apply button to save your changes. To cancel your unsaved changes, click the Cancel button. For additional static routes, repeat steps 1-4. To delete a static route entry: 1.From the Static Routing drop-down list, select the entry number of the static route. 2.Click the Delete This Entry button. 3.To save a deletion, click the Apply button. To cancel a deletion, click the Cancel button. 27 KA300 Wireless Router 7.2 User Manual Wireless Setup 7.2.1 Wireless Basic Settings • Network Mode – If you have Wireless-G and 802.11b devices in your network, then keep the default setting, Mixed. If you have only Wireless-G devices, select G-Only. If you would like to limit your network to only 802.11b devices, then select B-Only. If you want to disable wireless networking, select Disable. Note that B-Only mode is not supported under WDS. • Network Name(SSID) – Enter the name of your wireless network. • Country – Select your Country from the pull-down list. This field specifies the Country where the wireless function of the Router can be used. It may be illegal to use the wireless function of the Router in a region other than one of those specified in this filed. If your country or region is not listed, please contact your local government agency for assistance. • Channel – This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select auto, then AP will choose the best channel automatically. • Bandwidth – The bandwidth of the wireless channel. • SSID Broadcast – When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the router. To broadcast the router SSID, keep the default setting, Enable. If you do not want to broadcast the router SSID, then select Disable 28 KA300 Wireless Router User Manual 7.2.2 Guest Access Use the Guest Access feature to provide guests visiting your home with Internet access only. The guest network is a wireless network separate from your local network. • Allow Guest Access – To allow Internet access through a guest network, select yes. • Guest Network Name – The name of the guest network is displayed. • Total Guests Allowed – Select the number of guests you want to allow on your guest network. • SSID Broadcast – When wireless devices survey the local area for wireless networks to associate with, they will detect the SSID (wireless network name) broadcast by the Router. To broadcast the SSID of the guest network, keep the default, Enabled. 29 KA300 Wireless Router User Manual 7.2.3 Security You can select one of the following security options: • Disabled – The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the Router without encryption. It is recommended strongly that you choose one of following options to enable security. • WEP – Select 802.11 WEP security. • WPA/WPA2 - Personal – Select WPA based on pre-shared passphrase. • WPA/WPA2 - Enterprise – Select WPA based on Radius Server. Each security option has its own settings as described follows. ² WEP Select a level of WEP encryption. • Passphrase – Enter a passphrase to automatically generate WEP keys. Then click Generate. • Key 1 – If you did not enter a passphrase, enter the WEP key(s) manually. • Key 2 – If you did not enter a passphrase, enter the WEP key(s) manually. WPA/WPA2 - Enterprise Version - You can select one of following versions, • WPA – Wi-Fi Protected Access. • WPA2 – WPA version 2. 30 KA300 Wireless Router • User Manual RADIUS Server – Enter the IP address of the RADIUS server. • RADIUS Port – Enter the port number of the RADIUS server. The default is1812. • Shared Key – Enter the key shared between the Router and the server. ² WPA/WPA2 - Personal(WPA-PSK/WPA2-PSK) Version - You can select one of following versions, • WPA-PSK – Pre-shared key of WPA. • WPA2-PSK – Pre-shared key of WPA2. • PSK Password –You can enter ASCII or Hexadecimal characters. For Hexadecimal, the length should be between 8 and 64 characters; for ASCII, the length should be between 8 and 63 characters. 7.2.4 WPS Setup Wi-Fi Protected Setup(WPS) WPS function will help you add a new device to the network quickly. If the new device supports Wi-Fi Protected Setup and is equipped with a configuration button, you can add it to the network by pressing the configuration button on the device and then press the button on the Router within two minutes. The status LED on the Router will light blue for five minutes if the device has been successfully added to the network. If the new device supports Wi-Fi Protected Setup and the connection way using PIN, you can add it to the network by entering the Router's PIN. • WPS Status – Enable or disable the WPS function here. 31 KA300 Wireless Router • User Manual Push Button – This button's function is same to the physical button on the router. • Client's PIN – If the client supports the connection way by entering its PIN.Enter the Client's PIN.Click Register button to connect the client. • Router's PIN – The current value of the Router's PIN displayed here. 7.2.5 Wireless Access Setup ² MAC Filter The Wireless MAC Address Filtering feature allows you to control the wireless stations accessing the AP, which depend on the station's MAC addresses. • MAC Restrict Mode – To disable the Wireless MAC Address Filters feature, keep the default setting, Disable. – First, you must decide whether the specified wireless stations can or cannot access the AP. If you desire that the specified wireless stations can access the AP, please select Allow, otherwise, select Deny ² MAC Address List – The wireless station's MAC address that you want to access. 32 KA300 Wireless Router User Manual 7.2.6 WDS Setup WDS (Wireless Distribution System) is a Wireless Access Point mode that enables wireless bridging in which WDS APs communicate only with each other only (without allowing for wireless clients or stations to access them), and/or wireless repeating in which APs communicate both with each other and with wireless stations (at the expense of half the throughput). • Mode – Selecting Wireless Bridge disables access point functionality. Only wireless bridge (also known as Wireless Distribution System or WDS) functionality will be available. Selecting Access Point enables access point functionality. Wireless bridge functionality will still be available and wireless stations will be able to associate to the AP. • Bridge Restriction – Selecting Disabled disables wireless bridge restriction. Any wireless bridge (including the ones listed in Remote Bridges) will be granted access. Selecting Enabled enables wireless bridge restriction. Only those bridges listed in Remote Bridges will be granted access. • Bridges – Enter the peer wireless MAC addresses of any wireless bridges that should be part of the wireless distribution system (WDS). We will describe how to configure WDS to connect 2 ROUTERs. 33 KA300 Wireless Router User Manual 1. Make these 2 routers same channel ( not Auto ) and security mode and passphrase in Wireless – Basic Settings & wireless security. 2. ROUTER1 can use default IP address 192.168.1.1, and ROUTER2 should change the IP address to other IP address but in same segment like 192.168.1.2. And user should disable ROUTER2’s DHCP function in Setup– LAN page. 3. ROUTER 1 : Go to advance=>wireless=>WDS page, Select Access Point in Mode. Add ROUTER 2’s wireless interface MAC address (BSSID) to ROUTER 1’s Bridges:. And then Click save button. 34 KA300 Wireless Router User Manual 4. ROUTER 2 : Go to Setup=>WLAN=>WDS page, Select Wireless Bridge in Mode. Add ROUTER 1’s wireless interface MAC address (BSSID) to ROUTER 2’s AP MAC Address. And then Click save. If you can access the Internet from ROUTER 1, then you can set the PC which connect with ROUTER 2 as this: IP Address: 192.168.1.x Subnet mask: 255.255.255.0 Gateway: 192.168.1.1 DNS: 192.168.1.1 So you can access the Internet from ROUTER 2. 35 KA300 Wireless Router 7.3 Service – QoS User Manual Setup QoS (Quality of Service) QoS assigns different levels of priority to specific types of network traffic, so it helps to ensure optimal performance for demanding, real-time applications, such as online gaming, VoIP calls, and video streaming. Wireless No Acknowledgement – No Acknowledgement – If you want the Router to re-send data if an error occurs, keep the default, Disabled. If you do not want the Router to re-send data if an error occurs, select Enabled. Internet Access Priority QoS is only applied to traffic streams that are uploaded to the Internet. • Enabled/Disabled – To use the QoS policies you set, select Enabled. 36 KA300 Wireless Router User Manual Upstream Bandwidth This option sets the maximum upstream bandwidth of your Internet connection. To allow the Router to detect the maximum, keep the default, Auto. To specify the maximum, select Manual. Then enter the appropriate bandwidth and select Kbps or Mbps. Category Select the appropriate category. Go to the instructions for your selection. • Applications – Select the appropriate application. If you select Add a New Application, follow the instructions in the Add a New Application section. • Priority – Select the appropriate priority. Click Apply to save your changes. Summary This lists the QoS entries you have created for your applications and devices. 7.4 Security Setup 7.4.1 Firewall setup Internet Filter • Filter Anonymous Internet Requests – Stops the router from responding to "pings" from the WAN. 37 KA300 Wireless Router User Manual • Filter Multicast – Prevents multicast packets from reaching the LAN. • Filter Internet NAT Redirection for IPv4 Internet Only – Prevents hosts on LAN from using WAN address of router to contact servers on the LAN (which have been configured using port redirection). • Filter IDENT (Port 113) – Prevents WAN access to port 113. Web Filter • Proxy – Blocks HTTP requests containing the "Host:" string. • Java – Blocks HTTP requests containing a URL ending in ".js" or ".class". • ActiveX – Blocks HTTP requests containing a URL ending in ".ocx" or ".cab". • Cookies – Identifies HTTP requests that contain the "Cookie:" string and mangle the cookie. Attempts to stop cookies from being used. 7.4.2 URL Setup Enter the keywords for the sites that you want to block. For example, enter "XXX" in the list The URL filter will block the http://www.abcXXX.com, http://www.XXXbbb.com and so on. 7.4.3 Remote Access Setup This feature allows you to manage your Router from a remote location via the Internet or Internat. 38 KA300 Wireless Router User Manual 7.4.4 DoS A "denial-of-service" (DoS) attack is characterized by an explicit attempt by hackers to prevent legitimate users of a service from using that service. • Enable DoS Prevention – Enable or disable DoS Prevention. And choose what you want. 39 KA300 Wireless Router User Manual Appendix: Frequent Asked Questions Q: None of the LEDs are on when user power on the router? A: Please make sure what user use is the power adaptor attached with the router package 40 KA300 Wireless Router User Manual Q: PC cannot browse Internet web page? A: Please make sure DNS server appointed to the PC is correct. User can use ping application program to test whether the PC can connect to the DNS server of the ADSL operator. If the cause is not above given 41
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : kasdad Create Date : 2014:08:12 13:20:04Z Modify Date : 2014:08:22 11:06:32-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : kasdad Title : KA300 Manual NEW SOFT .doc Creator Tool : KA300 Manual NEW SOFT .doc - Microsoft Word Metadata Date : 2014:08:22 11:06:32-07:00 Producer : Acrobat PDFWriter 5.0 for Windows NT Document ID : uuid:8849825a-308a-46ec-9a86-edc3df72545a Instance ID : uuid:a2ab569d-f9ee-4078-846c-aca6a8cf2789 Page Count : 45EXIF Metadata provided by EXIF.tools