Keeson Technology RF358A REMOTE CONTROL 358A User Manual User Guidex

Download:
Mirror Download [FCC.gov]
Document ID	2812293
Application ID	oZf1/jlQWud+KA7rPn4uJw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.75kB (334433 bits)
Date Submitted	2015-11-13 00:00:00
Date Available	2015-11-13 00:00:00
Creation Date	2015-11-12 11:31:43
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-11-12 11:31:43
Document Title	Microsoft Word - User Guide.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclks52

California Arch User Guide
1.Appearance
2.Specification
1. Part Number: JLDK.33.01.02;
2. Working Voltage：3.0-5.0V;
3. Working Current：21.8mA @4.5V;
4. Operation Temperature：-20～55℃;
5. Storage temperature：-25～75℃;
6. RF Frequency Range：2.4~2.4835GHz;
7. RF Modulation：GFSK;
8. RF Transmitted Power: 0 dBm;
9. Housing Material: ABS;
3.Interface Description
P1
HEAD MASSAGE
P2
TIMER
P3
FOOT MASSAGE
P4
HEAD UP
P5
ZERO G
P6
FOOT UP
P7
HEAD DOWN
P8
LIGHT
P9
FOOT DOWN
P10
MEMORY I
P11
MEMORY II
P12
MEMORY III
P13
FLAT
1. P1 (HEAD MASSAGE)：Turns head massage on and cycles trough all massage levels form
lowest to highest. Turns head massage off if highest massage level was selected before
button was pressed.
2. P2 (TIMER)：Sets massage timeout. Cycles trough a timeout of 10, 20 and 30 minutes,
starting with 10 minutes. Massage is turned off if massage timeout was set to 30 minutes
before button was pressed.
3. P3 (FOOT MASSAGE)：Turns foot massage on and cycles trough all massage levels form
lowest to highest. Turns foot massage off if highest massage level was selected before
button was pressed.
4. P4 (HEAD UP)：Press this key, the head actuator out, release to stop it.
5. P5 (ZERO G)： Actuators are moved into ZERO G position automatically. The movement
starts when the key is released. Click any key to stop it.
6. P6 (FOOT UP)：Press this key, the foot actuator out, release to stop it.
7. P7 (HEAD DOWN)：Press this key, the head actuator in, release to stop it.
8. P8 (LIGHT)：Toggles on or off the floor light.
9. P9 (FOOT DOWN)：Press this key, the foot actuator in, release to stop it.
10. P10 (MEMORY I)：Actuators are moved into MEMORY I position automatically. The
movement starts when the key is released. Click any key to stop it. If the key is pressed for
more than 5 seconds the current position will be stored on this key.
11. P11 (MEMORY II)：Actuators are moved into MEMORY II position automatically. The
movement starts when the key is released. Click any key to stop it. If the key is pressed for
more than 5 seconds the current position will be stored on this key.
12. P12 (MEMORY III)：Actuators are moved into MEMORY III position automatically. The
movement starts when the key is released. Click any key to stop it. If the key is pressed for
more than 5 seconds the current position will be stored on this key.
13. P13 (FLAT)：Actuators are moved into FLAT automatically. The movement starts when the
key is released. Click any key to stop it.
14. P13&P5 (FLAT&ZERO G): Memory positions( I II III ) can be restored by pressing Zero-G
and All-Flat for 5 seconds.
15. P4&P6&P7&P9 ( HEAD UP & HEAD DOWN &FOOT UP & FOOT DOWN): Press P4,P6,P7,P9
simultaneously, the control box will enter self-test mode;
4.Operation Instructions
Pairing: There is a white key under the battery cover. Press this key for more than 1
second, the remote will enter pairing mode and a LED besides the pairing key will be
flashing. Release this key to stop pairing .After the pairing is successful, LED will stop
flashing.
5.Fcc warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : baclks52
Create Date                     : 2015:11:12 11:31:43+08:00
Modify Date                     : 2015:11:12 11:31:43+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - User Guide.docx
Creator                         : baclks52
Document ID                     : uuid:d3170eaa-8fed-48b9-8403-816b51e713a7
Instance ID                     : uuid:f1c6a67a-b790-4830-8c5b-22a78913eede
Page Count                      : 4

EXIF Metadata provided by EXIF.tools